Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

dig(1m) [sunos man page]

dig(1M) 						  System Administration Commands						   dig(1M)

dig - DNS lookup utility SYNOPSIS
dig [@server] [-b address] [-c class] [-f filename] [-k filename] [-p port#] [-t type] [-x addr] [-y name:key] [name] [type] [class] [queryopt...] dig -h dig [global-queryopt...] query... DESCRIPTION
The dig utility (domain information groper) is a flexible tool for interrogating DNS name servers. It performs DNS lookups and displays the answers that are returned from the name server(s) that were queried. Most DNS administrators use dig to troubleshoot DNS problems because of its flexibility, ease of use and clarity of output. Other lookup tools tend to have less functionality than dig. Although dig is normally used with command-line arguments, it also has a batch mode of operation for reading lookup requests from a file. A brief summary of its command-line arguments and options is printed when the -h option is specified. Unlike earlier versions, the BIND9 implementation of dig allows multiple lookups to be issued from the command line. Unless it is told to query a specific name server, dig tries each of the servers listed in /etc/resolv.conf. When no command line arguments or options are given, dig performs an NS query for "." (the root). It is possible to set per user defaults for dig with ${HOME}/.digrc. This file is read and any options in it are applied before the command line arguments. The following is a typical invocation of dig: dig @server name type where: server The name or IP address of the name server to query. This can be an IPv4 address in dotted-decimal notation or an IPv6 address in colon-delimited notation. When the supplied server argument is a hostname, dig resolves that name before querying that name server. If no server argument is provided, dig consults /etc/resolv.conf and queries the name servers listed there. The reply from the name server that responds is displayed. name The name of the resource record that is to be looked up. type Indicates what type of query is required (ANY, A, MX, SIG, among others.) type can be any valid query type. If no type argument is supplied, dig performs a lookup for an A record. OPTIONS
The following options are supported: -b address Set the source IP address of the query to address. This must be a valid address on one of the host's network interfaces. -c class Override the default query class (IN for internet). The class argument is any valid class, such as HS for Hesiod records or CH for CHAOSNET records. -f filename Operate in batch mode by reading a list of lookup requests to process from the file filename. The file contains a number of queries, one per line. Each entry in the file should be organised in the same way they would be presented as queries to dig using the command-line interface. -h Print a brief summary of command-line arguments and options. -k filename Specify a transaction signature (TSIG) key file to sign the DNS queries sent by dig and their responses using TSIGs. -p port# Query a non-standard port number. The port# argument is the port number that dig sends its queries instead of the standard DNS port number 53. This option tests a name server that has been configured to listen for queries on a non-standard port number. -t type Set the query type to type, which can be any valid query type supported in BIND9. The default query type "A", unless the -x option is supplied to indicate a reverse lookup. A zone transfer can be requested by specifying a type of AXFR. When an incremental zone transfer (IXFR) is required, type is set to ixfr=N. The incremental zone transfer will contain the changes made to the zone since the serial number in the zone's SOA record was N. -x addr Simplify reverse lookups (mapping addresses to names ). The addr argument is an IPv4 address in dotted-decimal notation, or a colon-delimited IPv6 address. When this option is used, there is no need to provide the name, class and type arguments. The dig utility automatically performs a lookup for a name like and sets the query type and class to PTR and IN, respectively. By default, IPv6 addresses are looked up using the IP6.ARPA domain and binary labels as defined in RFC 2874. Specify the -n (nibble) option to use the older RFC 1886 method using the IP6.INT domain and "nibble" labels . -y name:key Specify a transaction signature (TSIG) key on the command line. The name argument is the name of the TSIG key and the key argument is the actual key. The key is a base-64 encoded string, typically generated by dnssec-keygen(1M). Caution should be taken when using the -y option on multi-user systems, since the key can be visible in the output from ps(1) or in the shell's history file. When using TSIG authentication with dig, the name server that is queried needs to know the key and algorithm that is being used. In BIND, this is done by providing appropriate key and server statements in named.conf(4). QUERY OPTIONS
The dig utility provides a number of query options which affect the way in which lookups are made and the results displayed. Some of these set or reset flag bits in the query header, some determine which sections of the answer get printed, and others determine the timeout and retry strategies. Each query option is identified by a keyword preceded by a plus sign (+). Some keywords set or reset an option. These may be preceded by the string no to negate the meaning of that keyword. Other keywords assign values to options like the timeout interval. They have the form +keyword=value. The query options are: +[no]tcp Use [do not use] TCP when querying name servers. The default behaviour is to use UDP unless an AXFR or IXFR query is requested, in which case a TCP connection is used. +[no]vc Use [do not use] TCP when querying name servers. This alternate syntax to +[no]tcp is provided for backwards com- patibility. The "vc" stands for "virtual circuit". +[no]ignore Ignore truncation in UDP responses instead of retrying with TCP. By default, TCP retries are performed. +domain=somename Set the search list to contain the single domain somename, as if specified in a domain directive in /etc/resolv.conf, and enable search list processing as if the +search option were given. +[no]search Use [do not use] the search list defined by the searchlist or domain directive in resolv.conf (if any). The search list is not used by default. +[no]defname Deprecated, treated as a synonym for +[no]search. +[no]aaonly This option does nothing. It is provided for compatibility with old versions of dig where it set an unimplemented resolver flag. +[no]adflag Set [do not set] the AD (authentic data) bit in the query. The AD bit currently has a standard meaning only in responses, not in queries, but the ability to set the bit in the query is provided for completeness. +[no]cdflag Set [do not set] the CD (checking disabled) bit in the query. This requests the server to not perform DNSSEC vali- dation of responses. +[no]recurse Toggle the setting of the RD (recursion desired) bit in the query. This bit is set by default, which means dig nor- mally sends recursive queries. Recursion is automatically disabled when the +nssearch or +trace query options are used. +[no]nssearch When this option is set, dig attempts to find the authoritative name servers for the zone containing the name being looked up and display the SOA record that each name server has for the zone. +[no]trace Toggle tracing of the delegation path from the root name servers for the name being looked up. Tracing is disabled by default. When tracing is enabled, dig makes iterative queries to resolve the name being looked up. It will fol- low referrals from the root servers, showing the answer from each server that was used to resolve the lookup. +[no]cmd Toggle the printing of the initial comment in the output identifying the version of dig and the query options that have been applied. This comment is printed by default. +[no]short Provide a terse answer. The default is to print the answer in a verbose form. +[no]identify Show [or do not show] the IP address and port number that supplied the answer when the +short option is enabled. If short form answers are requested, the default is not to show the source address and port number of the server that provided the answer. +[no]comments Toggle the display of comment lines in the output. The default is to print comments. +[no]stats Toggle the printing of statistics: when the query was made, the size of the reply and so on. The default behaviour is to print the query statistics. +[no]qr Print [do not print] the query as it is sent. By default, the query is not printed. +[no]question Print [do not print] the question section of a query when an answer is returned. The default is to print the ques- tion section as a comment. +[no]answer Display [do not display] the answer section of a reply. The default is to display it. +[no]authority Display [do not display] the authority section of a reply. The default is to display it. +[no]additional Display [do not display] the additional section of a reply. The default is to display it. +[no]all Set or clear all display flags. +time=T Sets the timeout for a query to T seconds. The default time out is 5 seconds. An attempt to set T to less than 1 will result in a query timeout of 1 second being applied. +tries=T Sets the number of times to retry UDP queries to server to T instead of the default, 3. If T is less than or equal to zero, the number of retries is silently rounded up to 1. +ndots=D Set the number of dots that have to appear in name to D for it to be considered absolute. The default value is that defined using the ndots statement in /etc/resolv.conf, or 1 if no ndots statement is present. Names with fewer dots are interpreted as relative names and will be searched for in the domains listed in the search or domain directive in /etc/resolv.conf. +bufsize=B Set the UDP message buffer size advertised using EDNS0 to B bytes. The maximum and minimum sizes of this buffer are 65535 and 0 respectively. Values outside this range are rounded up or down appropriately. +[no]multiline Print records like the SOA records in a verbose multi-line format with human-readable comments. The default is to print each record on a single line, to facilitate machine parsing of the dig output. +[no]fail Do not try the next server if you receive a SERVFAIL. The default is to not try the next server which is the reverse of normal stub resolver behaviour. +[no]besteffort Attempt to display the contents of messages which are malformed. The default is to not display malformed answers. +[no]dnssec Request DNSSEC records be sent by setting the DNSSEC OK bit (DO) in the OPT record in the additional section of the query. MULTIPLE QUERIES
The BIND 9 implementation of dig supports specifying multiple queries on the command line (in addition to supporting the -f batch file option). Each of those queries can be supplied with its own set of flags, options and query options. In this case, each query argument represent an individual query in the command-line syntax described above. Each consists of any of the standard options and flags, the name to be looked up, an optional query type and class and any query options that should be applied to that query. A global set of query options, global-queryopt, can be applied to all queries. These global query options must precede the first tuple of name, class, type, options, flags, and query options supplied on the command line. Any global query options (except the +[no]cmd option) can be overridden by a query-specific set of query options. For example: dig +qr any -x ns +noqr shows how dig could be used from the command line to make three lookups: an ANY query for, a reverse lookup of and a query for the NS records of A global query option of +qr is applied, so that dig shows the initial query it made for each lookup. The final query has a local query option of +noqr which means that dig will not print the initial query when it looks up the NS records for FILES
/etc/resolv.conf Resolver configuration file ${HOME}/.digrc User-defined configuration file ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | |Availability |SUNWbind9 | |Interface Stability |External | +-----------------------------+-----------------------------+ SEE ALSO
dnssec-keygen(1M), host(1M), named(1M), attributes(5) RFC 1035 BUGS
There are probably too many query options. NOTES
Source for BIND9 is available in the SUNWbind9S package. SunOS 5.10 15 Dec 2004 dig(1M)
Man Page