Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

sed(1) [sunos man page]

sed(1)								   User Commands							    sed(1)

NAME
sed - stream editor SYNOPSIS
/usr/bin/sed [-n] script [file...] /usr/bin/sed [-n] [-e script]... [-f script_file]... [file...] /usr/xpg4/bin/sed [-n] script [file...] /usr/xpg4/bin/sed [-n] [-e script]... [-f script_file]... [file...] DESCRIPTION
The sed utility is a stream editor that reads one or more text files, makes editing changes according to a script of editing commands, and writes the results to standard output. The script is obtained from either the script operand string, or a combination of the option-argu- ments from the -e script and -f script_file options. The sed utility is a text editor. It cannot edit binary files or files containing ASCII NUL () characters or very long lines. OPTIONS
The following options are supported: -e script script is an edit command for sed. See USAGE below for more information on the format of script. If there is just one -e option and no -f options, the flag -e may be omitted. -f script_file Takes the script from script_file. script_file consists of editing commands, one per line. -n Suppresses the default output. Multiple -e and -f options may be specified. All commands are added to the script in the order specified, regardless of their origin. OPERANDS
The following operands are supported: file A path name of a file whose contents will be read and edited. If multiple file operands are specified, the named files will be read in the order specified and the concatenation will be edited. If no file operands are specified, the standard input will be used. script A string to be used as the script of editing commands. The application must not present a script that violates the restric- tions of a text file except that the final character need not be a NEWLINE character. USAGE
A script consists of editing commands, one per line, of the following form: [ address [ , address ] ] command [ arguments ] Zero or more blank characters are accepted before the first address and before command. Any number of semicolons are accepted before the first address. In normal operation, sed cyclically copies a line of input (less its terminating NEWLINE character) into a pattern space (unless there is something left after a D command), applies in sequence all commands whose addresses select that pattern space, and copies the resulting pattern space to the standard output (except under -n) and deletes the pattern space. Whenever the pattern space is written to standard output or a named file, sed will immediately follow it with a NEWLINE character. Some of the commands use a hold space to save all or part of the pattern space for subsequent retrieval. The pattern and hold spaces will each be able to hold at least 8192 bytes. sed Addresses An address is either empty, a decimal number that counts input lines cumulatively across files, a $ that addresses the last line of input, or a context address, which consists of a /regular expression/ as described on the regexp(5) manual page. A command line with no addresses selects every pattern space. A command line with one address selects each pattern space that matches the address. A command line with two addresses selects the inclusive range from the first pattern space that matches the first address through the next pattern space that matches the second address. Thereafter the process is repeated, looking again for the first address. (If the second address is a number less than or equal to the line number selected by the first address, only the line corresponding to the first address is selected.) Typically, address are separated from each other by a comma (,). They may also be separated by a semicolon (;). sed Regular Expressions sed supports the basic regular expressions described on the regexp(5) manual page, with the following additions: cREc In a context address, the construction cREc, where c is any character other than a backslash or NEWLINE character, is identical to /RE/. If the character designated by c appears following a backslash, then it is considered to be that literal character, which does not terminate the RE. For example, in the context address xabcxdefx, the second x stands for itself, so that the regular expression is abcxdef. The escape sequence matches a NEWLINE character embedded in the pattern space. A literal NEWLINE character must not be used in the regular expression of a context address or in the substitute command. Editing commands can be applied only to non-selected pattern spaces by use of the negation command ! (described below). sed Editing Commands In the following list of functions the maximum number of permissible addresses for each function is indicated. The r and w commands take an optional rfile (or wfile) parameter, separated from the command letter by one or more blank characters. Multiple commands can be specified by separating them with a semicolon (;) on the same command line. The text argument consists of one or more lines, all but the last of which end with to hide the NEWLINE. Each embedded NEWLINE character in the text must be preceded by a backslash. Other backslashes in text are removed and the following character is treated literally. Back- slashes in text are treated like backslashes in the replacement string of an s command, and may be used to protect initial blanks and tabs against the stripping that is done on every script line. The rfile or wfile argument must terminate the command line and must be preceded by exactly one blank. The use of the wfile parameter causes that file to be initially created, if it does not exist, or will replace the contents of an existing file. There can be at most 10 distinct wfile arguments. Regular expressions match entire strings, not just individual lines, but a NEWLINE character is matched by in a sed RE. A NEWLINE char- acter is not allowed in an RE. Also notice that cannot be used to match a NEWLINE character at the end of an input line; NEWLINE charac- ters appear in the pattern space as a result of the N editing command. Two of the commands take a command-list, which is a list of sed commands separated by NEWLINE characters, as follows: { command command } The { can be preceded with blank characters and can be followed with white space. The commands can be preceded by white space. The termi- nating } must be preceded by a NEWLINE character and can be preceded or followed by <blank>s. The braces may be preceded or followed by <blank>s. The command may be preceded by <blank>s, but may not be followed by <blank>s. The following table lists the functions, with the maximum number of permissible addresses. +------------+----------------+----------------------------------+ |Max Address | Command | Description | +------------+----------------+----------------------------------+ | 1 | a text | Append by executing N command or | | | | beginning a new cycle. Place | | | | text on the output before read- | | | | ing the next input line. | +------------+----------------+----------------------------------+ | 2 | b label | Branch to the : command bearing | | | | the label . If label is empty, | | | | branch to the end of the script. | | | | Labels are recognized unique up | | | | to eight characters. | +------------+----------------+----------------------------------+ | 2 | c text | Change. Delete the pattern | | | | space. Place text on the out- | | | | put. Start the next cycle. | +------------+----------------+----------------------------------+ | 2 | d | Delete the pattern space. Start | | | | the next cycle. | +------------+----------------+----------------------------------+ | 2 | D | Delete the initial segment of | | | | the pattern space through the | | | | first new-line. Start the next | | | | cycle. (See the N command | | | | below.) | +------------+----------------+----------------------------------+ | 2 | g | Replace the contents of the pat- | | | | tern space by the contents of | | | | the hold space. | +------------+----------------+----------------------------------+ | 2 | G | Append the contents of the hold | | | | space to the pattern space. | +------------+----------------+----------------------------------+ | 2 | h | Replace the contents of the hold | | | | space by the contents of the | | | | pattern space. | +------------+----------------+----------------------------------+ | 2 | H | Append the contents of the pat- | | | | tern space to the hold space. | +------------+----------------+----------------------------------+ | 1 | i text | Insert. Place text on the stan- | | | | dard output. | +------------+----------------+----------------------------------+ | 2 | l | /usr/bin/sed: List the pattern | | | | space on the standard output in | | | | an unambiguous form. Non-print- | | | | able characters are displayed in | | | | octal notation and long lines | | | | are folded. | +------------+----------------+----------------------------------+ | | | /usr/xpg4/bin/sed: List the | | | | pattern space on the standard | | | | output in an unambiguous form. | | | | Non-printable characters are | | | | displayed in octal notation and | | | | long lines are folded. The char- | | | | acters (\, a, , f, , , | | | | and v) are written as the cor- | | | | responding escape sequences. | | | | Non-printable characters not in | | | | that table will be written as | | | | one three-digit octal number | | | | (with a preceding backslash | | | | character) for each byte in the | | | | character (most significant byte | | | | first). If the size of a byte on | | | | the system is greater than nine | | | | bits, the format used for non- | | | | printable characters is imple- | | | | mentation dependent. | +------------+----------------+----------------------------------+ | | | Long lines are folded, with the | | | | point of folding indicated by | | | | writing a backslash followed by | | | | a NEWLINE; the length at which | | | | folding occurs is unspecified, | | | | but should be appropriate for | | | | the output device. The end of | | | | each line is marked with a $. | +------------+----------------+----------------------------------+ | 2 | n | Copy the pattern space to the | | | | standard output if default out- | | | | put is not suppressed. Replace | | | | the pattern space with the next | | | | line of input. | +------------+----------------+----------------------------------+ | 2 | N | Append the next line of input to | | | | the pattern space with an embed- | | | | ded new-line. (The current line | | | | number changes.) If no next | | | | line of input is available, the | | | | N command verb shall branch to | | | | the end of the script and quit | | | | without starting a new cycle and | | | | without writing the pattern | | | | space. | +------------+----------------+----------------------------------+ | 2 | p | Print. Copy the pattern space | | | | to the standard output. | +------------+----------------+----------------------------------+ | 2 | P | Copy the initial segment of the | | | | pattern space through the first | | | | new-line to the standard output. | +------------+----------------+----------------------------------+ | 1 | q | Quit. Branch to the end of the | | | | script. Do not start a new | | | | cycle. | +------------+----------------+----------------------------------+ | 2 | r rfile | Read the contents of rfile. | | | | Place them on the output before | | | | reading the next input line. If | | | | rfile does not exist or cannot | | | | be read, it is treated as if it | | | | were an empty file, causing no | | | | error condition. | +------------+----------------+----------------------------------+ | 2 | t label | Test. Branch to the : command | | | | bearing the label if any substi- | | | | tutions have been made since the | | | | most recent reading of an input | | | | line or execution of a t. If | | | | label is empty, branch to the | | | | end of the script. | +------------+----------------+----------------------------------+ | 2 | w wfile | Write. Append the pattern space | | | | to wfile. The first occurrence | | | | of w will cause wfile to be | | | | cleared. Subsequent invocations | | | | of w will append. Each time the | | | | sed command is used, wfile is | | | | overwritten. | +------------+----------------+----------------------------------+ | 2 | x | Exchange the contents of the | | | | pattern and hold spaces. | +------------+----------------+----------------------------------+ | 2 | ! command | Don't. Apply the command (or | | | | group, if command is {) only to | | | | lines not selected by the | | | | address(es). | +------------+----------------+----------------------------------+ | 0 | : label | This command does nothing; it | | | | bears a label for b and t com- | | | | mands to branch to. | +------------+----------------+----------------------------------+ | 1 | = | Place the current line number on | | | | the standard output as a line. | +------------+----------------+----------------------------------+ | 2 | {command-list} | Execute command-list only when | | | | the pattern space is selected. | +------------+----------------+----------------------------------+ | 0 | | An empty command is ignored. | +------------+----------------+----------------------------------+ | 0 | # | If a # appears as the first | | | | character on a line of a script | | | | file, then that entire line is | | | | treated as a comment, with one | | | | exception: if a # appears on the | | | | first line and the character | | | | after the # is an n, then the | | | | default output will be sup- | | | | pressed. The rest of the line | | | | after #n is also ignored. A | | | | script file must contain at | | | | least one non-comment line. | +------------+----------------+----------------------------------+ +-----------+-----------------------------------------------+ |Max Addr | Command (Using strings) and Description | +-----------+-----------------------------------------------+ | 2 | s/regular expression/replacement/flags | +-----------+-----------------------------------------------+ | |Substitute the replacement string for | | |instances of the regular expression in the | | |pattern space. Any character other than back- | | |slash or newline can be used instead of a | | |slash to delimit the RE and the replacement. | | |Within the RE and the replacement, the RE | | |delimiter itself can be used as a literal | | |character if it is preceded by a backslash. | +-----------+-----------------------------------------------+ | |An ampersand (&) appearing in the replacement | | |will be replaced by the string matching the | | |RE. The special meaning of & in this context | | |can be suppressed by preceding it by back- | | |slash. The characters , where n is a digit, | | |will be replaced by the text matched by the | | |corresponding backreference expression. For | | |each backslash () encountered in scanning | | |replacement from beginning to end, the follow- | | |ing character loses its special meaning (if | | |any). It is unspecified what special meaning | | |is given to any character other than &, or | | |digits. | +-----------+-----------------------------------------------+ | |A line can be split by substituting a NEWLINE | | |character into it. The application must | | |escape the NEWLINE character in the replace- | | |ment by preceding it with backslash. A sub- | | |stitution is considered to have been performed | | |even if the replacement string is identical to | | |the string that it replaces. | +-----------+-----------------------------------------------+ | | flags is zero or more of: | +-----------+-----------------------------------------------+ | |n n= 1 - 512. Substitute for just the nth | | |occurrence of the regular expression. | +-----------+-----------------------------------------------+ | |g Global. Substitute for all nonoverlapping | | |instances of the regular expression rather | | |than just the first one. If both g and n are | | |specified, the results are unspecified. | +-----------+-----------------------------------------------+ | |p Print the pattern space if a replacement was | | |made. | +-----------+-----------------------------------------------+ | |P Copy the initial segment of the pattern | | |space through the first new-line to the stan- | | |dard output. | +-----------+-----------------------------------------------+ | |w wfile Write. Append the pattern space to | | |wfile if a replacement was made. The first | | |occurrence of w will cause wfile to be | | |cleared. Subsequent invocations of w will | | |append. Each time the sed command is used, | | |wfile is overwritten. | +-----------+-----------------------------------------------+ | 2 | y/ string1 / | +-----------+-----------------------------------------------+ |string2 / | | +-----------+-----------------------------------------------+ | |Transform. Replace all occurrences of charac- | | |ters in string1 with the corresponding char- | | |acters in string2. string1 and string2 must | | |have the same number of characters, or if any | | |of the characters in string1 appear more than | | |once, the results are undefined. Any charac- | | |ter other than backslash or NEWLINE can be | | |used instead of slash to delimit the strings. | | |Within string1 and string2, the delimiter | | |itself can be used as a literal character if | | |it is preceded by a backslash. For example, | | |y/abc/ABC/ replaces a with A, b with B, and c | | |with C. | +-----------+-----------------------------------------------+ See largefile(5) for the description of the behavior of sed when encountering files greater than or equal to 2 Gbyte ( 2**31 bytes). EXAMPLES
Example 1: An example sed script This sed script simulates the BSD cat -s command, squeezing excess blank lines from standard input. sed -n ' # Write non-empty lines. /./ { p d } # Write a single empty line, then look for more empty lines. /^$/ p # Get next line, discard the held <newline> (empty line), # and look for more empty lines. :Empty /^$/ { N s/.// b Empty } # Write the non-empty line before going back to search # for the first in a set of empty lines. p ' ENVIRONMENT VARIABLES
See environ(5) for descriptions of the following environment variables that affect the execution of sed: LANG, LC_ALL, LC_COLLATE, LC_CTYPE, LC_MESSAGES, and NLSPATH. EXIT STATUS
The following exit values are returned: 0 Successful completion. >0 An error occurred. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: /usr/bin/sed +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWcsu | +-----------------------------+-----------------------------+ |CSI |Not enabled | +-----------------------------+-----------------------------+ /usr/xpg4/bin/sed +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWxcu4 | +-----------------------------+-----------------------------+ |CSI |Enabled | +-----------------------------+-----------------------------+ |Interface Stability |Standard | +-----------------------------+-----------------------------+ SEE ALSO
awk(1), ed(1), grep(1), attributes(5), environ(5), largefile(5), regexp(5), standards(5) SunOS 5.10 23 Jul 1998 sed(1)
Man Page