rwho(1) [sunos man page]
rwho(1) User Commands rwho(1) NAME
rwho - who is logged in on local machines SYNOPSIS
rwho [-a] DESCRIPTION
The rwho command produces output similar to who(1), but for all machines on your network. If no report has been received from a machine for 5 minutes, rwho assumes the machine is down, and does not report users last known to be logged into that machine. If a user has not typed to the system for a minute or more, rwho reports this idle time. If a user has not typed to the system for an hour or more, the user is omitted from the output of rwho unless the -a flag is given. OPTIONS
-a Report all users whether or not they have typed to the system in the past hour. FILES
/var/spool/rwho/whod.* information about other machines ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | |Availability |SUNWrcmds | +-----------------------------+-----------------------------+ SEE ALSO
finger(1), ruptime(1), who(1), in.rwhod(1M), attributes(5) NOTES
rwho does not work through gateways. The directory /var/spool/rwho must exist on the host from which rwho is run. This service takes up progressively more network bandwith as the number of hosts on the local net increases. For large networks, the cost becomes prohibitive. The rwho service daemon, in.rwhod(1M), must be enabled for this command to return useful results. SunOS 5.10 6 Nov 2000 rwho(1)
Check Out this Related Man Page
in.rwhod(1M) System Administration Commands in.rwhod(1M) NAME
in.rwhod, rwhod - system status server SYNOPSIS
/usr/sbin/in.rwhod [ -m [ttl]] DESCRIPTION
in.rwhod is the server which maintains the database used by the rwho(1) and ruptime(1) programs. Its operation is predicated on the abil- ity to broadcast or multicast messages on a network. in.rwhod operates as both a producer and consumer of status information. As a producer of information it periodically queries the state of the system and constructs status messages which are broadcast or multicast on a network. As a consumer of information, it listens for other in.rwhod servers' status messages, validating them, then recording them in a collection of files located in the directory /var/spool/rwho. The rwho server transmits and receives messages at the port indicated in the rwho service specification, see services(4). The messages sent and received are defined in /usr/include/protocols/rwhod.h and are of the form: struct outmp { char out_line[8]; /* tty name */ char out_name[8]; /* user id */ long out_time; /* time on */ }; struct whod { char wd_vers; char wd_type; char wd_fill[2]; int wd_sendtime; int wd_recvtime; char wd_hostname[32]; int wd_loadav[3]; int wd_boottime; struct whoent { struct outmp we_utmp; int we_idle; } wd_we[1024 / sizeof (struct whoent)]; }; All fields are converted to network byte order prior to transmission. The load averages are as calculated by the w(1) program, and repre- sent load averages over the 1, 5, and 15 minute intervals prior to a server's transmission. The host name included is that returned by the uname(2) system call. The array at the end of the message contains information about the users who are logged in to the sending machine. This information includes the contents of the utmpx(4) entry for each non-idle terminal line and a value indicating the time since a char- acter was last received on the terminal line. Messages received by the rwho server are discarded unless they originated at a rwho server's port. In addition, if the host's name, as specified in the message, contains any unprintable ASCII characters, the message is discarded. Valid messages received by in.rwhod are placed in files named whod.hostname in the directory /var/spool/rwho. These files contain only the most recent message, in the format described above. Status messages are generated approximately once every 3 minutes. OPTIONS
The following options are supported: -m [ ttl ] Use the rwho IP multicast address (224.0.1.3) when transmitting. Receive announcements both on this multicast address and on the IP broadcast address. If ttl is not specified in.rwhod multicasts on all interfaces but with the IP TimeToLive set to 1 (that is, packets are not forwarded by multicast routers.) If ttl is specified in.rwhod only transmits packets on one interface and setting the IP TimeToLive to the specified ttl. FILES
/var/spool/rwho/whod.* information about other machines ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWrcmds | +-----------------------------+-----------------------------+ SEE ALSO
ruptime(1), rwho(1), w(1), uname(2), services(4), utmpx(4), attributes(5) WARNINGS
This service can cause network performance problems when used by several hosts on the network. It is not run at most sites by default. If used, include the -m multicast option. NOTES
This service takes up progressively more network bandwidth as the number of hosts on the local net increases. For large networks, the cost becomes prohibitive. in.rwhod should relay status information between networks. People often interpret the server dying as a machine going down. SunOS 5.10 8 Dec 2001 in.rwhod(1M)