EVERUPS(8) Network UPS Tools (NUT) EVERUPS(8)NAME
everups - Driver for Ever UPS models
NOTE
This man page only documents the hardware-specific features of the everups driver. For information about the core driver, see nutups-
drv(8).
SUPPORTED HARDWARE
This driver should recognize the NET *-DPC and AP *-PRO models.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
This UPS can only switch off the load if it's running on battery. This means you may be vulnerable to power races if your shutdown scripts
don't sleep and force a reboot.
AUTHOR
Bartek Szady <bszx@bszxdomain.edu.eu.org>
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/
NUT mailing list archives and information: http://lists.exploits.org/
Wed Oct 16 2002 EVERUPS(8)
Check Out this Related Man Page
BESTUPS(8) Network UPS Tools (NUT) BESTUPS(8)NAME
bestups - Driver for Best Power / SOLA (Phoenixtec protocol) UPS equipment
NOTE
This man page only documents the hardware-specific features of the bestups driver. For information about the core driver, see nutups-
drv(8).
SUPPORTED HARDWARE
bestups was designed to monitor Best Power UPS hardware like the Fortress, Fortress Telecom, and Patriot Pro. It also recognizes and sup-
ports SOLA units such as the 520 and 620.
Other UPS hardware using the Phoenixtec protocol should also work, but they will generate a warning since their battery information is not
known.
This driver does not support some older Best/SOLA units. Try the bestfort driver if this one does not detect your UPS.
EXTRA ARGUMENTS
This driver does not support any extra settings in the ups.conf(5).
BUGS
The battery percentage is derived from the voltage data that the UPS returns, since the UPS doesn't return that value directly. On some
hardware, the charge will remain at 100% for a long time and then drops quickly shortly before the battery runs out. You can confirm from
the BATTVOLT readings that this is a problem with the UPS and not this driver.
Similarly, the float from the charger in some models forces the battery charge percentage back up to 100% immedately after the UPS goes
back on-line, so you can't tell when it is really recharged.
Finally, some models give one value for the battery's nominal voltage and yet actually have a nominal voltage slightly below that. This
leads to things such as the perpetual 98.7% charge on the author's Fortress 750, even when it's been charging for weeks.
AUTHOR
Russell Kroll
SEE ALSO
The core driver:
nutupsdrv(8)
Internet resources:
The NUT (Network UPS Tools) home page: http://www.exploits.org/nut/
NUT mailing list archives and information: http://lists.exploits.org/
Tue Jul 30 2002 BESTUPS(8)
I need to use bash to convert sentences where all words start with a small letter into one where all words start with a capital letter.
So that a string like:
are utilities ready for hurricane sandy
becomes:
Are Utilities Ready For Hurricane Sandy (10 Replies)
Hi
I am new to this forum.
Any please help me to capture ctrl x and ctrl y via a bash script.
and please tell me how to clear the prompt via bash script
BR
Ramukumar M (4 Replies)
I have an Oracle Linux 7.1 vsphere host built. It's be preconfigured with our security configurations.
What I would like to do is unconfigure this host. Then set the host to do firstboot --reconfigure.
how do I do that using /etc/sysconfig/firstboot?
I've tried setting
... (10 Replies)
i know from the command line, the symbol $_ is used to get the last command that was run.
however, id like to replicate this within a script.
meaning, how do i do something like this:
#!/bin/sh
ps -ef | egrep talling
StoreThisLastCommandA=$_
awk '/error/ {print $3}' /tmp/test... (5 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
Hi Folks,
I feel that I should be posting this in the Unix for Dummies Forum and will probably wish I'd created an account and done just that - but here goes anyway.
I have two identical servers both Dell R430's both running RedHat Enterprise Server 7.4 and the same kernel, both have the same... (16 Replies)
Hi,
What is installation package and how to create it?
When we run:
in AIX:
installp package1
or
in Linux
rpm -ivh mypackage
What is package1 or mypackage in the abov examples and how to create them and deploy them?
I hope my question is clear enough.
Thank you (2 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)