Unix/Linux Go Back    

RedHat 9 (Linux i386) - man page for vboxgetty.conf (redhat section 5)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)

vboxgetty.conf(5)		   Linux System Administration			vboxgetty.conf(5)

       vboxgetty.conf - config file for vboxgetty

       The file /etc/isdn/vboxgetty.conf is used to configure vboxgetty. Please read the man page
       vboxgetty(8) for a description of how vboxgetty works.

       Everything after "#" is ignored, as are empty lines. All arguments must	be  separated  by
       whitespace (spaces, tabs). Arguments may not contain whitespace.

       All  settings before the first port command are global settings, after a port command they
       only affect the current port.

       port <string>
	      ISDN device to configure.

       modeminit <string>
	      Command to initialize the modem. You should set  the  MSN/EAZ  on  which	vboxgetty
	      should listen for incoming calls. Default is "ATZ".

       user <string>
	      Name  of	the user that vboxgetty will use. This user must exist in /etc/passwd and
	      you must use this parameter.

       group <string>
	      Name of the group that vboxgetty will use. This group must exist in /etc/group  and
	      you must use this parameter.

       umask <number>
	      Vboxgetty  will  use this umask when creating new files. You must give the umask as
	      an octal number. Default is 077.

       dropdtrtime <seconds>
	      Number of milliseconds to hold the DTR-Line low to reset the modem.  Default  value
	      is 800.

       initpause <number>
	      Number  of  milliseconds to wait after initializing the modem. This is used to com-
	      pensate the delay of the "NO CARRIER" response. Default value is 1500.

       badinitsexit <number>
	      Maximum failures with modeminit.	If  this  number  is  reached,	vboxgetty  exits.
	      Default is 0.

       ringtimeout <number>
	      Time  in	seconds  to  wait for a RING. If no RING is received within this time, no
	      call is taken. Default is 5.

       echotimeout <number>
	      Time in seconds to wait for the echo from the modem. Default is 4.

       commandtimeout <number>
	      Time in seconds to wait for a response to a modem command. Default is 4.

       alivetimeout <number>
	      After this time in seconds vboxgetty will check if the modem is still responding to
	      modem commands. Default is 1800.

       compression <string>
	      Audio  compression  to  use  to  record  new messages. Possible values are ADPCM-2,
	      ADPCM-3, ADPCM-4 and ULAW. The  ALAW  compression  mode  is  no  longer  supported.
	      Default is ULAW.

       spooldir <string>
	      Spool  directory	to use. This directory must exist. It's used for control files of
	      several programs. Default is /var/spool/vbox/<user>.

       vboxconfig <string>
	      Full path of the vbox config file. Default value is <spooldir>/vbox.conf.

       freespace <number>
	      Number of bytes that must be available on the partition with the	spool  directory,
	      so that a call may be taken. Default is 0.

	      this configuration file

       vboxgetty(8), vbox(5), vboxtcl(5)

       This  manual  page  was	written  by  Andreas Jellinghaus <aj@dungeon.inka.de>, for Debian
       GNU/Linux and isdn4linux.

ISDN 4 Linux 3.1pre4			    2000/09/15				vboxgetty.conf(5)
Unix & Linux Commands & Man Pages : 2000 - 2018 Unix and Linux Forums

All times are GMT -4. The time now is 10:18 AM.