Unix/Linux Go Back    

RedHat 9 (Linux i386) - man page for history (redhat section 3)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)

HISTORY(3)									       HISTORY(3)

       history - GNU History Library

       The GNU History Library is Copyright (C) 1989-2002 by the Free Software Foundation, Inc.

       Many  programs read input from the user a line at a time.  The GNU History library is able
       to keep track of those lines, associate arbitrary data with each line, and utilize  infor-
       mation from previous lines in composing new ones.

       The  history library supports a history expansion feature that is identical to the history
       expansion in bash.  This section describes what syntax features are available.

       History expansions introduce words from the history list into the input stream, making  it
       easy to repeat commands, insert the arguments to a previous command into the current input
       line, or fix errors in previous commands quickly.

       History expansion is usually performed immediately after a  complete  line  is  read.   It
       takes  place  in two parts.  The first is to determine which line from the history list to
       use during substitution.  The second is to select portions of that line for inclusion into
       the  current  one.   The  line selected from the history is the event, and the portions of
       that line that are acted upon are words.  Various modifiers are	available  to  manipulate
       the  selected  words.  The line is broken into words in the same fashion as bash does when
       reading input, so that several words that would otherwise be separated are considered  one
       word when surrounded by quotes (see the description of history_tokenize() below).  History
       expansions are introduced by the appearance of the history expansion character, which is !
       by  default.  Only backslash (\) and single quotes can quote the history expansion charac-

   Event Designators
       An event designator is a reference to a command line entry in the history list.

       !      Start a history substitution, except when followed by a blank, newline, = or (.
       !n     Refer to command line n.
       !-n    Refer to the current command line minus n.
       !!     Refer to the previous command.  This is a synonym for `!-1'.
	      Refer to the most recent command starting with string.
	      Refer to the most recent command containing string.  The trailing ? may be  omitted
	      if string is followed immediately by a newline.
	      Quick  substitution.   Repeat  the  last	command,  replacing string1 with string2.
	      Equivalent to ``!!:s/string1/string2/'' (see Modifiers below).
       !#     The entire command line typed so far.

   Word Designators
       Word designators are used to select desired words from the event.  A : separates the event
       specification  from  the word designator.  It may be omitted if the word designator begins
       with a ^, $, *, -, or %.  Words are numbered from the beginning	of  the  line,	with  the
       first  word being denoted by 0 (zero).  Words are inserted into the current line separated
       by single spaces.

       0 (zero)
	      The zeroth word.	For the shell, this is the command word.
       n      The nth word.
       ^      The first argument.  That is, word 1.
       $      The last argument.
       %      The word matched by the most recent `?string?' search.
       x-y    A range of words; `-y' abbreviates `0-y'.
       *      All of the words but the zeroth.	This is a synonym for `1-$'.  It is not an  error
	      to  use  *  if there is just one word in the event; the empty string is returned in
	      that case.
       x*     Abbreviates x-$.
       x-     Abbreviates x-$ like x*, but omits the last word.

       If a word designator is supplied without an event specification, the previous  command  is
       used as the event.

       After the optional word designator, there may appear a sequence of one or more of the fol-
       lowing modifiers, each preceded by a `:'.

       h      Remove a trailing file name component, leaving only the head.
       t      Remove all leading file name components, leaving the tail.
       r      Remove a trailing suffix of the form .xxx, leaving the basename.
       e      Remove all but the trailing suffix.
       p      Print the new command but do not execute it.
       q      Quote the substituted words, escaping further substitutions.
       x      Quote the substituted words as with q, but break into words at blanks and newlines.
	      Substitute new for the first occurrence of old in the event  line.   Any	delimiter
	      can be used in place of /.  The final delimiter is optional if it is the last char-
	      acter of the event line.	The delimiter may be quoted in old and new with a  single
	      backslash.   If  &  appears in new, it is replaced by old.  A single backslash will
	      quote the &.  If old is null, it is set to the last old substituted, or, if no pre-
	      vious history substitutions took place, the last string in a !?string[?]	search.
       &      Repeat the previous substitution.
       g      Cause  changes  to be applied over the entire event line.  This is used in conjunc-
	      tion with `:s' (e.g., `:gs/old/new/') or `:&'.  If used with  `:s',  any	delimiter
	      can  be  used  in place of /, and the final delimiter is optional if it is the last
	      character of the event line.

       This section describes how to use the History library in other programs.

   Introduction to History
       The programmer using the History library has available functions for remembering lines  on
       a  history  list,  associating  arbitrary  data with a line, removing lines from the list,
       searching through the list for a line containing an arbitrary text string, and referencing
       any  line  in  the  list directly.  In addition, a history expansion function is available
       which provides for a consistent user interface across different programs.

       The user using programs written with the History library has the benefit of  a  consistent
       user  interface	with  a  set of well-known commands for manipulating the text of previous
       lines and using that text in new commands.  The basic history  manipulation  commands  are
       identical to the history substitution provided by bash.

       If  the	programmer  desires, he can use the Readline library, which includes some history
       manipulation by default, and has the added advantage of command line editing.

       Before declaring any functions using any functionality the  History  library  provides  in
       other code, an application writer should include the file <readline/history.h> in any file
       that uses the History library's features.  It supplies extern declarations for all of  the
       library's public functions and variables, and declares all of the public data structures.

   History Storage
       The history list is an array of history entries.  A history entry is declared as follows:

       typedef void * histdata_t;

       typedef struct _hist_entry {
	 char *line;
	 histdata_t data;
       } HIST_ENTRY;

       The history list itself might therefore be declared as

       HIST_ENTRY ** the_history_list;

       The state of the History library is encapsulated into a single structure:

	* A structure used to pass around the current state of the history.
       typedef struct _hist_state {
	 HIST_ENTRY **entries; /* Pointer to the entries themselves. */
	 int offset;	       /* The location pointer within this array. */
	 int length;	       /* Number of elements within this array. */
	 int size;	       /* Number of slots allocated to this array. */
	 int flags;

       If the flags member includes HS_STIFLED, the history has been stifled.

History Functions
       This  section describes the calling sequence for the various functions exported by the GNU
       History library.

   Initializing History and State Management
       This section describes functions used to initialize and manage the state  of  the  History
       library when you want to use the history functions in your program.

       void using_history (void)
       Begin a session in which the history functions might be used.  This initializes the inter-
       active variables.

       HISTORY_STATE * history_get_history_state (void)
       Return a structure describing the current state of the input history.

       void history_set_history_state (HISTORY_STATE *state)
       Set the state of the history list according to state.

   History List Management
       These functions manage individual entries on the history list, or set parameters  managing
       the list itself.

       void add_history (const char *string)
       Place string at the end of the history list.  The associated data field (if any) is set to

       HIST_ENTRY * remove_history (int which)
       Remove history entry at offset which from the history.  The removed element is returned so
       you can free the line, data, and containing structure.

       HIST_ENTRY * replace_history_entry (int which, const char *line, histdata_t data)
       Make  the history entry at offset which have line and data.  This returns the old entry so
       you can dispose of the data.  In the case of an invalid which, a NULL pointer is returned.

       void clear_history (void)
       Clear the history list by deleting all the entries.

       void stifle_history (int max)
       Stifle the history list, remembering only the last max entries.

       int unstifle_history (void)
       Stop stifling the history.  This returns the  previously-set  maximum  number  of  history
       entries	(as set by stifle_history()).  history was stifled.  The value is positive if the
       history was stifled, negative if it wasn't.

       int history_is_stifled (void)
       Returns non-zero if the history is stifled, zero if it is not.

   Information About the History List
       These functions return information about  the  entire  history  list  or  individual  list

       HIST_ENTRY ** history_list (void)
       Return  a  NULL terminated array of HIST_ENTRY * which is the current input history.  Ele-
       ment 0 of this list is the beginning of time.  If there is no history, return NULL.

       int where_history (void)
       Returns the offset of the current history element.

       HIST_ENTRY * current_history (void)
       Return the history entry at the current position, as determined	by  where_history().   If
       there is no entry there, return a NULL pointer.

       HIST_ENTRY * history_get (int offset)
       Return  the  history entry at position offset, starting from history_base.  If there is no
       entry there, or if offset is greater than the history length, return a NULL pointer.

       int history_total_bytes (void)
       Return the number of bytes that the primary history  entries  are  using.   This  function
       returns the sum of the lengths of all the lines in the history.

   Moving Around the History List
       These functions allow the current index into the history list to be set or changed.

       int history_set_pos (int pos)
       Set the current history offset to pos, an absolute index into the list.	Returns 1 on suc-
       cess, 0 if pos is less than zero or greater than the number of history entries.

       HIST_ENTRY * previous_history (void)
       Back up the current history offset to the previous history entry, and return a pointer  to
       that entry.  If there is no previous entry, return a NULL pointer.

       HIST_ENTRY * next_history (void)
       Move  the  current  history  offset  forward  to  the next history entry, and return the a
       pointer to that entry.  If there is no next entry, return a NULL pointer.

   Searching the History List
       These functions allow searching of the history list  for  entries  containing  a  specific
       string.	 Searching  may  be  performed both forward and backward from the current history
       position.  The search may be anchored, meaning that the string must match at the beginning
       of the history entry.

       int history_search (const char *string, int direction)
       Search  the  history  for string, starting at the current history offset.  If direction is
       less than 0, then the search is through previous  entries,  otherwise  through  subsequent
       entries.  If string is found, then the current history index is set to that history entry,
       and the value returned is the offset in the line of the	entry  where  string  was  found.
       Otherwise, nothing is changed, and a -1 is returned.

       int history_search_prefix (const char *string, int direction)
       Search  the  history  for  string,  starting at the current history offset.  The search is
       anchored: matching lines must begin with string.  If direction is less than  0,	then  the
       search  is  through  previous entries, otherwise through subsequent entries.  If string is
       found, then the current history index is set to that entry, and the  return  value  is  0.
       Otherwise, nothing is changed, and a -1 is returned.

       int history_search_pos (const char *string, int direction, int pos)
       Search  for  string in the history list, starting at pos, an absolute index into the list.
       If direction is negative, the  search  proceeds	backward  from	pos,  otherwise  forward.
       Returns the absolute index of the history element where string was found, or -1 otherwise.

   Managing the History File
       The  History library can read the history from and write it to a file.  This section docu-
       ments the functions for managing a history file.

       int read_history (const char *filename)
       Add the contents of filename to the history list, a line at a time.  If filename is  NULL,
       then read from ~/.history.  Returns 0 if successful, or errno if not.

       int read_history_range (const char *filename, int from, int to)
       Read  a	range  of lines from filename, adding them to the history list.  Start reading at
       line from and end at to.  If from is zero, start at the beginning.  If  to  is  less  than
       from,  then  read  until the end of the file.  If filename is NULL, then read from ~/.his-
       tory.  Returns 0 if successful, or errno if not.

       int write_history (const char *filename)
       Write the current history to filename, overwriting filename if necessary.  If filename  is
       NULL, then write the history list to ~/.history.  Returns 0 on success, or errno on a read
       or write error.

       int append_history (int nelements, const char *filename)
       Append the last nelements of the history list to filename.   If	filename  is  NULL,  then
       append to ~/.history.  Returns 0 on success, or errno on a read or write error.

       int history_truncate_file (const char *filename, int nlines)
       Truncate  the  history  file filename, leaving only the last nlines lines.  If filename is
       NULL, then ~/.history is truncated.  Returns 0 on success, or errno on failure.

   History Expansion
       These functions implement history expansion.

       int history_expand (char *string, char **output)
       Expand string, placing the result into output, a pointer to a string.  Returns:
	      0      If no expansions took place (or, if the only change  in  the  text  was  the
		     removal of escape characters preceding the history expansion character);
	      1      if expansions did take place;
	      -1     if there was an error in expansion;
	      2      if  the  returned line should be displayed, but not executed, as with the :p
       If an error ocurred in expansion, then output contains a descriptive error message.

       char * get_history_event (const char *string, int *cindex, int qchar)
       Returns the text of the history event beginning at string + *cindex.  *cindex is  modified
       to point to after the event specifier.  At function entry, cindex points to the index into
       string where the history event specification begins.  qchar is a character that is allowed
       to end the event specification in addition to the ``normal'' terminating characters.

       char ** history_tokenize (const char *string)
       Return  an  array of tokens parsed out of string, much as the shell might.  The tokens are
       split on the characters in the history_word_delimiters variable, and shell quoting conven-
       tions are obeyed.

       char * history_arg_extract (int first, int last, const char *string)
       Extract a string segment consisting of the first through last arguments present in string.
       Arguments are split using history_tokenize().

   History Variables
       This section describes the  externally-visible  variables  exported  by	the  GNU  History

       int history_base
       The logical offset of the first entry in the history list.

       int history_length
       The number of entries currently stored in the history list.

       int history_max_entries
       The maximum number of history entries.  This must be changed using stifle_history().

       char history_expansion_char
       The  character  that  introduces  a  history  event.  The default is !.	Setting this to 0
       inhibits history expansion.

       char history_subst_char
       The character that invokes word substitution if found at the start of a line.  The default
       is ^.

       char history_comment_char
       During  tokenization,  if this character is seen as the first character of a word, then it
       and all subsequent characters up to a newline are ignored, suppressing  history	expansion
       for the remainder of the line.  This is disabled by default.

       char * history_word_delimiters
       The  characters	that  separate	tokens	for  history_tokenize().   The	default  value is
       " \t\n()<>;&|".

       char * history_no_expand_chars
       The list of characters which inhibit history expansion if found immediately following his-
       tory_expansion_char.  The default is space, tab, newline, \r, and =.

       char * history_search_delimiter_chars
       The  list  of additional characters which can delimit a history search string, in addition
       to space, tab, : and ? in the case of a substring search.  The default is empty.

       int history_quotes_inhibit_expansion
       If non-zero, single-quoted words are not scanned for the history expansion character.  The
       default value is 0.

       rl_linebuf_func_t * history_inhibit_expansion_function
       This  should  be  set  to  the  address	of  a function that takes two arguments: a char *
       (string) and an int index into that string (i).	It should return a non-zero value if  the
       history	expansion  starting  at  string[i] should not be performed; zero if the expansion
       should be done.	It is intended for use by applications like bash  that	use  the  history
       expansion character for additional purposes.  By default, this variable is set to NULL.

	      Default filename for reading and writing saved history

       The Gnu Readline Library, Brian Fox and Chet Ramey
       The Gnu History Library, Brian Fox and Chet Ramey

       Brian Fox, Free Software Foundation

       Chet Ramey, Case Western Reserve University

       If  you	find  a  bug in the history library, you should report it.  But first, you should
       make sure that it really is a bug, and that it appears in the latest version of	the  his-
       tory library that you have.

       Once  you  have	determined  that  a  bug  actually exists, mail a bug report to bug-read-
       line@gnu.org.  If you have a fix, you are welcome to mail that as well!	 Suggestions  and
       `philosophical'	bug reports may be mailed to bug-readline@gnu.org or posted to the Usenet
       newsgroup gnu.bash.bug.

       Comments  and  bug  reports  concerning	this  manual   page   should   be   directed   to

GNU History 4.3 			 2002 January 31			       HISTORY(3)
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums

All times are GMT -4. The time now is 02:14 AM.