Home Man
Today's Posts

Linux & Unix Commands - Search Man Pages

RedHat 9 (Linux i386) - man page for openjade (redhat section 1)

OPENJADE(1)									      OPENJADE(1)

       openjade - apply a DSSSL stylesheet to an SGML or XML document

       openjade [-vCegG2s] [-b encoding] [-f error_file]
		[-c catalog_sysid] [-D dir] [-a link_type]
		[-A arch] [-E max_errors] [-i entity]
		[-w warning_type] [-d dsssl_spec] [-V variable=value]
		[-t output_type] [-o output_file] [sysid...]

       openjade is an implementation of the ISO/IEC 10179:1996 standard DSSSL language. The DSSSL
       engine receives as input an SGML or XML document and transforms it into formats like:

       * XML representation of the flow object tree.

       * RTF format that can be rendered and printed with Microsoft's free Word Viewer 97

       * TeX format

       * MIF format that can be rendered and printed with Framemaker

       * SGML or XML format. This is used in conjunction with non-standard flow object classes to
       generate SGML, thus allowing openjade to be used for SGML/XML transformations.

       The system identifier of the document to be processed is specified as an argument to open-
       jade. If this is omitted, standard input will be read.

       openjade determines the system identifier for the DSSSL specification as follows:

       1. If the -d option is specified, it will use the argument as the system identifier.

       2. Otherwise, it will look for processing instructions in the prolog of the document.  Two
       kinds of processing instruction are recognized:

       <?stylesheet href="sysid" type="text/dsssl">

       The system data of the processing instruction is parsed like an SGML start-tag. It will be
       parsed using the reference concrete syntax whatever the actual concrete syntax of the doc-
       ument.  The  name  that	starts	the processing instruction can be either stylesheet, xml-
       stylesheet or xml:stylesheet. The processing instruction will be ignored unless the  value
       of  the	type attribute is one of text/dsssl, text/x-dsssl, application/dsssl, or applica-
       tion/x-dsssl. The value of href attribute is the system identifier of the DSSSL specifica-

       <?dsssl sysid>

       The system identifier is the portion of the system data of the processing instruction fol-
       lowing the initial name and any whitespace.

       Although the processing instruction is only recognized in the prolog, it need not occur in
       the  document  entity. For example, it could occur in a DTD. The system identifier will be
       interpreted relative to where the the processing instruction occurs.

       3. Otherwise, it will use the system identifier of the document with any extension changed
       to .dsl.

       A  DSSSL specification document can contain more than one style-specification. If the sys-
       tem identifier of the DSSSL specification is followed by #id, then openjade will  use  the
       style-specification whose unique identifier is id. This is allowed both with the -d option
       and with the processing instructions.

       The DSSSL specification must be an SGML document conforming to the DSSSL architecture. For
       an example, see dsssl/demo.dsl.

       openjade  supports the following options in addition to the normal OpenSP (see onsgmls(1))
       options (note that all options are case-sensitive, ie -g and -G are different options):

       -d dsssl_spec
	      This specifies that dsssl_spec is the system identifier of the DSSSL  specification
	      to be used.

       -G     Debug  mode. When an error occurs in the evaluation of an expression, openjade will
	      display a stack trace. Note that this disables tail-call optimization.

       -c filename
	      The filename arguments specify catalog files rather than the document  entity.  The
	      document entity is specified by the first DOCUMENT entry in the catalog files.

       -s     Strict compliance mode. Currently the only effect is that jade doesn't use any pre-
	      defined character names, sdata-entity mappings or name-characters. This  is  useful
	      for  checking  that  your stylesheet is portable to other DSSSL implementations and
	      that it is strictly compliant to the DSSSL specifications.

       -t output_type
	      output_type specifies the type of output as follows:

	      fot  An XML representation of the flow object tree

	      rtf rtf-95  RTF (used for SGML/XML to RTF transformations)  Microsoft's  Rich  Text
	      Format. rtf-95 produces output optimized for Word 95 rather than Word 97.

	      tex TeX (used for SGML/XML to TeX transformations)

	      sgml  sgml-raw  SGML  (used for SGML/XML to SGML transformations). sgml-raw doesn't
	      emit linebreaks in tags.

	      xml xml-raw XML (used for SGML/XML to XML transformations).  xml-raw  doesn't  emit
	      linebreaks in tags.

	      html  HTML (used for SGML/XML to HTML transformations)

	      mif MIF (used for SGML/XML to MIF transformations)

       -o output_file
	      Write  output  to  output_file  instead of the default. The default filename is the
	      name of the last input file with its extension replaced by the name of the type  of
	      output. If there is no input filename, then the extension is added onto jade-out.

       -V variable
	      This  is	equivalent to doing (define variable #t) except that this definition will
	      take priority over any definition of variable in a style-sheet.

       -V variable=value
	      This is equivalent to doing (define variable "value") except that  this  definition
	      will take priority over any definition of variable in a style-sheet.

       -V (define variable value)
	      This  is	equivalent  to	doing (define variable value) except that this definition
	      will take priority over any definition of variable in a style-sheet. Note that  you
	      will  probably have to use some escaping mechanism for the spaces to get the entire
	      scheme expression parsed as one cmdline argument.

       -wtype Control warnings and errors. Multiple -w options are allowed. The following  values
	      of type enable warnings:

	      xml Warn about constructs that are not allowed by XML.

	      mixed Warn about mixed content models that do not allow #pcdata anywhere.

	      sgmldecl Warn about various dubious constructions in the SGML declaration.

	      should  Warn  about various recommendations made in ISO 8879 that the document does
	      not comply with. (Recommendations are expressed with ``should'', as  distinct  from
	      requirements which are usually expressed with ``shall''.)

	      default Warn about defaulted references.

	      duplicate Warn about duplicate entity declarations.

	      undefined Warn about undefined elements: elements used in the DTD but not defined.

	      unclosed Warn about unclosed start and end-tags.

	      empty Warn about empty start and end-tags.

	      net Warn about net-enabling start-tags and null end-tags.

	      min-tag  Warn  about  minimized  start  and  end-tags. Equivalent to combination of
	      unclosed, empty and net warnings.

	      unused-map Warn about unused short reference maps: maps that are	declared  with	a
	      short  reference mapping declaration but never used in a short reference use decla-
	      ration in the DTD.

	      unused-param Warn about parameter entities that are defined but not used in a  DTD.
	      Unused  internal	parameter  entities whose text is INCLUDE or IGNORE won't get the

	      notation-sysid Warn about notations for which no system identifier could be  gener-

	      all  Warn  about	conditions  that should usually be avoided (in the opinion of the
	      author). Equivalent to: mixed, should, default,  undefined,  sgmldecl,  unused-map,
	      unused-param, empty and unclosed.

	      A  warning  can  be  disabled by using its name prefixed with no-. Thus -wall -wno-
	      duplicate will enable all warnings except those  about  duplicate  entity  declara-

	      The following values for warning_type disable errors:

	      no-idref Do not give an error for an ID reference value which no element has as its
	      ID. The effect will be as if each attribute declared as an ID reference  value  had
	      been declared as a name.

	      no-significant  Do  not  give  an  error when a character that is not a significant
	      character in the reference concrete syntax occurs in a literal in the SGML declara-
	      tion. This may be useful in conjunction with certain buggy test suites.

	      no-valid	Do  not  require  the  document  to be type-valid. This has the effect of
	      changing the SGML declaration to specify VALIDITY NOASSERT and IMPLYDEF ATTLIST YES
	      ELEMENT  YES.  An option of -wvalid has the effect of changing the SGML declaration
	      to specify VALIDITY TYPE and IMPLYDEF ATTLIST NO ELEMENT NO. If neither -wvalid nor
	      -wno-valid are specified, then the VALIDITY and IMPLYDEF specified in the SGML dec-
	      laration will be used.

       OpenJade ignores the SP_CHARSET_FIXED  and  SP_SYSTEM_CHARSET  environment  variables  and
       always  uses  Unicode  as  its  internal  character  set, as if SP_CHARSET_FIXED was 1 and
       SP_SYSTEM_CHARSET was unset. Thus only the SP_ENCODING environment variable is relevant to
       OpenJade's handling of character sets.

       The  following external procedures are available. These external procedures are defined by
       a prototype in the same manner as in the standard. To use one  of  these  external  proce-
       dures,  you  must  make	use  of the standard external-procedure procedure, using a public
       identifier of "UNREGISTERED::James Clark//Procedure::name" where name is  the  name  given
       here, typically by including the following in the DSSSL specification:

       (define name (external-procedure "UNREGISTERED::James Clark//Procedure::name"))

       Note  that  external-procedure  returns	#f  if it doesn't know about the specified public
       identifier. You can use this to enable your DSSSL specifications to work  gracefully  with
       other implementations which do not support these extensions.

       For  external  procedures  added by the OpenJade team, use a public identifier of the form

       An easy way to get access to all external procedures is to  use	the  style  specification
       dsssl/extensions.dsl#procedures.  The file dsssl/extensions.dsl also contains style speci-
       fications which make the nonstandard flow object  classes  and  inherited  characteristics
       supported by the backends available in a convenient way.


       (debug obj)

       Generates a message including the value of obj and then returns obj.

       Simple-page-sequence header/footer control

       (if-first-page sosofo1 sosofo2)

       This  can be used only in the specification of the value of one of the header/footer char-
       acteristics of simple-page-sequence. It returns a sosofo that will display as  sosofo1  if
       the page is the first page of the simple-page-sequence and as sosofo2 otherwise.

       (if-front-page sosofo1 sosofo2)

       This  can be used only in the specification of the value of one of the header/footer char-
       acteristics of simple-page-sequence. It returns a sosofo that will display as  sosofo1  if
       the  page  is  a  front	(ie  recto, odd-numbered) page and as sosofo2 if it is a back (ie
       verso, even-numbered) page.



       (all-element-number osnl)

       This is the same as element-number except it counts elements with any generic  identifier.
       If osnl is not an element returns #f, otherwise returns 1 plus the number of elements that
       started before osnl. This provides an efficient way of creating a  unique  identifier  for
       any element in a document.

       External entity access

       (read-entity string)

       This  returns  a string containing the contents of the external entity with system identi-
       fier string. This should be used only for textual entities (CDATA and SDATA), and not  for
       binary entities (NDATA).

       POSIX locale access

       (language lang country)

       This  procedure	returns  an object of type language, if the system supports the specified
       language. lang is a string or symbol giving the two letter language  code.  country  is	a
       string or symbol giving the two letter country code.

       This  procedure uses POSIX locales. It is an OpenJade addition. It is not supported on all
       operating systems.

       Extended standard procedures

       (sgml-parse sysid #!key active: parent: architecture:)

       This allows you to specify an SGML architecture with respect to which the document  should
       be parsed. It is an OpenJade addition.

       (expt q k)

       This allows you to raise a quantity to an integral power. It is an OpenJade addition.

       This  section  describes  the  limitations  of  the  front-end  (the general-purpose DSSSL
       engine); each backend also has its own limitations.

       openjade doesn't allow internal definitions at the beginning of bodies and  the	(test  =>
       recipient) variant of cond clauses.

       openjade supports only a single, fixed grove plan which comprises the following modules:

       * baseabs

       * prlgabs0

       * prlgabs1

       * instabs

       * basesds0

       * instsds0

       * subdcabs

       It  doesn't implement the following parts of SDQL: HyTime support, auxiliary parsing, node
       regular expressions.

       Query rules, sosofo synchronization, indirect sosofos, reference values, decoration  areas
       and font properties are not supported.

       Note that only inherited characteristics that are applicable to some supported flow object
       can be specified.

       Character/glyph handling

       It only supports a single pre-defined character repertoire. A character name of	the  form
       U-XXXX  where  XXXX  are four upper-case hexadecimal digits, is recognized as referring to
       the Unicode character with that code. For many characters, it is also possible to use  the
       ISO/IEC 10646 name in lower-case with words separated by hyphens.

       Some common SDATA entity names from the ISO entity sets are recognized and mapped to char-
       acters. In addition an SDATA entity name of the form U-XXXX, where XXXX	are  four  upper-
       case hexadecimal digits, is mapped to the Unicode character with that code.

       OpenJade now supports the standard-chars, map-sdata-entity, add-name-chars, add-separator-
       chars and char-repertoire declaration element forms,  allowing  a  style-sheet  to  define
       additional  character  names,  sdata  entity  mappings,	name  characters (i.e. characters
       allowed in identifiers) and separator characters. Currently the only recognized	character
       repertoire  is  the built-in repertoire. It has the public identifier "UNREGISTERED::Open-
       Jade//Character Repertoire::OpenJade".


       Several things that it would be desirable to have checked aren't checked:

       * When the allowed value of an inherited characteristic is a symbol, OpenJade checks  only
       that  the value is a symbol that is allowed as the value of some characteristic; #t and #f
       are treated as a special kind of symbol in this case.

       * OpenJade doesn't check whether a flow object is occurring  in	a  context  where  it  is

       *  OpenJade  does  not prevent flow objects being attached to the principal port of a flow
       object when the flow object shouldn't have a principal port.

       * Most type-checking is done at run-time not compile-time.

       * OpenJade does not check for non-inherited characteristics that are required to be speci-

       *  It  doesn't  check that optional features that have been used were declared in the fea-
       tures form.

       Other limitations

       The following primitives are just stubs:

       char-script-case Always returns last argument.

       address-visited? Always returns #f.

       Given an SGML file file.sgml, use the stylesheet file.dsl and publish as an rtf file.

       openjade -t rtf file.sgml

       Using a different stylesheet:

       openjade -t rtf -d docbook.dsl file.sgml

       Using the print style specification contained within the stylesheet

       openjade -t rtf -d docbook.dsl#print file.sgml

       And use the html specification within the style sheet to convert to html

       openjade -t sgml -i html -d docbook.dsl#html file.sgml


       James Clark, Ian Castle <ian.castle@looksystems.co.uk>.

OpenJade				   January 2002 			      OPENJADE(1)

All times are GMT -4. The time now is 09:52 PM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
Show Password