Unix/Linux Go Back    

RedHat 9 (Linux i386) - man page for ash (redhat section 1)

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:   man
Select Man Page Set:       apropos Keyword Search (sections above)

SH(1)				   BSD General Commands Manual				    SH(1)

     sh - command interpreter (shell)

     sh [-/+aCefnuvxIimqsVEbc] [-o longname] [target ...]

     Sh is the standard command interpreter for the system. The current version of sh is in the
     process of being changed to conform with the POSIX 1003.2 and 1003.2a specifications for the
     shell.  This version has many features which make it appear similar in some respects to the
     Korn shell, but it is not a Korn shell clone (see ksh(1)).  Only features designated by
     POSIX, plus a few Berkeley extensions, are being incorporated into this shell.  We expect
     POSIX conformance by the time 4.4 BSD is released. This man page is not intended to be a
     tutorial or a complete specification of the shell.

     The shell is a command that reads lines from either a file or the terminal, interprets them,
     and generally executes other commands. It is the program that is running when a user logs
     into the system (although a user can select a different shell with the chsh(1) command). The
     shell implements a language that has flow control constructs, a macro facility that provides
     a variety of features in addition to data storage, along with built in history and line
     editing capabilities.  It incorporates many features to aid interactive use and has the
     advantage that the interpretative language is common to both interactive and non-interactive
     use (shell scripts).  That is, commands can be typed directly to the running shell or can be
     put into a file and the file can be executed directly by the shell.

     If no args are present and if the standard input of the shell is connected to a terminal (or
     if the -i flag is set), and the -c option is not present, the shell is considered an inter-
     active shell.  An interactive shell generally prompts before each command and handles pro-
     gramming and command errors differently (as described below). When first starting, the shell
     inspects argument 0, and if it begins with a dash '-', the shell is also considered a login
     shell.  This is normally done automatically by the system when the user first logs in. A
     login shell first reads commands from the files /etc/profile and .profile if they exist.  If
     the environment variable ENV is set on entry to a shell, or is set in the .profile of a
     login shell, the shell next reads commands from the file named in ENV.  Therefore, a user
     should place commands that are to be executed only at login time in the .profile file, and
     commands that are executed for every shell inside the ENV file.  To set the ENV variable to
     some file, place the following line in your .profile of your home directory

	   ENV=$HOME/.shinit; export ENV

     substituting for ``.shinit'' any filename you wish. Since the ENV file is read for every
     invocation of the shell, including shell scripts and non-interactive shells, the following
     paradigm is useful for restricting commands in the ENV file to interactive invocations.
     Place commands within the ``case'' and ``esac'' below (these commands are described later):

	   case $- in *i*)
		 # commands for interactive use only

     If command line arguments besides the options have been specified, then the shell treats the
     first argument as the name of a file from which to read commands (a shell script), and the
     remaining arguments are set as the positional parameters of the shell ($1, $2, etc).  Other-
     wise, the shell reads commands from its standard input.

   Argument List Processing
     All of the single letter options have a corresponding name that can be used as an argument
     to the -o option. The set -o name is provided next to the single letter option in the
     description below. Specifying a dash ``-'' turns the option on, while using a plus ``+''
     disables the option.  The following options can be set from the command line or with the
     set(1) builtin (described later).

	   -a allexport     Export all variables assigned to. (UNIMPLEMENTED for 4.4alpha)

	   -c		    Read commands from the command line.  No commands will be read from
			    the standard input.

	   -C noclobber     Don't overwrite existing files with ``>''.	(UNIMPLEMENTED for

	   -e errexit	    If not interactive, exit immediately if any untested command fails.
			    The exit status of a command is considered to be explicitly tested if
			    the command is used to control an if, elif, while, or until; or if
			    the command is the left hand operand of an ``&&'' or ``||'' operator.

	   -f noglob	    Disable pathname expansion.

	   -n noexec	    If not interactive, read commands but do not execute them.	This is
			    useful for checking the syntax of shell scripts.

	   -u nounset	    Write a message to standard error when attempting to expand a vari-
			    able that is not set, and if the shell is not interactive, exit imme-
			    diately.  (UNIMPLEMENTED for 4.4alpha)

	   -v verbose	    The shell writes its input to standard error as it is read.  Useful
			    for debugging.

	   -x xtrace	    Write each command to standard error (preceded by a '+ ') before it
			    is executed.  Useful for debugging.

	   -q quietprofile  If the -v or -x options have been set, do not apply them when reading
			    initialization files, these being /etc/profile, .profile, and the
			    file specified by the ENV environment variable.

	   -I ignoreeof     Ignore EOF's from input when interactive.

	   -i interactive   Force the shell to behave interactively.

	   -m monitor	    Turn on job control (set automatically when interactive).

	   -s stdin	    Read commands from standard input (set automatically if no file argu-
			    ments are present).  This option has no effect when set after the
			    shell has already started running (i.e. with set(1)).

	   -V vi	    Enable the built-in vi(1) command line editor (disables -E if it has
			    been set).

	   -E emacs	    Enable the built-in emacs(1) command line editor (disables -V if it
			    has been set).

	   -b notify	    Enable asynchronous notification of background job completion.
			    (UNIMPLEMENTED for 4.4alpha)

   Lexical Structure
     The shell reads input in terms of lines from a file and breaks it up into words at white-
     space (blanks and tabs), and at certain sequences of characters that are special to the
     shell called ``operators''.  There are two types of operators: control operators and redi-
     rection operators (their meaning is discussed later). Following is a list of operators:

	   Control operators:
		 & && (); ;; | || <newline>

	   Redirection operator:
		 < > >| << >> <& >& <<- <>

     Quoting is used to remove the special meaning of certain characters or words to the shell,
     such as operators, whitespace, or keywords.  There are three types of quoting: matched sin-
     gle quotes, matched double quotes, and backslash.

     A backslash preserves the literal meaning of the following character, with the exception of
     <newline>.  A backslash preceding a <newline> is treated as a line continuation.

   Single Quotes
     Enclosing characters in single quotes preserves the literal meaning of all the characters
     (except single quotes, making it impossible to put single-quotes in a single-quoted string).

   Double Quotes
     Enclosing characters within double quotes preserves the literal meaning of all characters
     except dollarsign ($), backquote (`), and backslash (\).  The backslash inside double quotes
     is historically weird, and serves to quote only the following characters:
	   $ ` " \ <newline>.
     Otherwise it remains literal.

   Reserved Words
     Reserved words are words that have special meaning to the shell and are recognized at the
     beginning of a line and after a control operator.	The following are reserved words:

	   !	   elif    fi	   while   case
	   else    for	   then    {	   }
	   do	   done    until   if	   esac

     Their meaning is discussed later.

     An alias is a name and corresponding value set using the alias(1) builtin command.  Whenever
     a reserved word may occur (see above), and after checking for reserved words, the shell
     checks the word to see if it matches an alias. If it does, it replaces it in the input
     stream with its value.  For example, if there is an alias called ``lf'' with the value ``ls
     -F'', then the input:

	   lf foobar <return>

     would become

	   ls -F foobar <return>

     Aliases provide a convenient way for naive users to create shorthands for commands without
     having to learn how to create functions with arguments.  They can also be used to create
     lexically obscure code.  This use is discouraged.

     The shell interprets the words it reads according to a language, the specification of which
     is outside the scope of this man page (refer to the BNF in the POSIX 1003.2 document).
     Essentially though, a line is read and if the first word of the line (or after a control
     operator) is not a reserved word, then the shell has recognized a simple command.	Other-
     wise, a complex command or some other special construct may have been recognized.

   Simple Commands
     If a simple command has been recognized, the shell performs the following actions:

	   1.	Leading words of the form ``name=value'' are stripped off and assigned to the
		environment of the simple command.  Redirection operators and their arguments (as
		described below) are stripped off and saved for processing.

	   2.	The remaining words are expanded as described in the section called
		``Expansions'', and the first remaining word is considered the command name and
		the command is located.  The remaining words are considered the arguments of the
		command. If no command name resulted, then the ``name=value'' variable assign-
		ments recognized in item 1 affect the current shell.

	   3.	Redirections are performed as described in the next section.

     Redirections are used to change where a command reads its input or sends its output.  In
     general, redirections open, close, or duplicate an existing reference to a file.  The over-
     all format used for redirection is:

	   [n] redir-op file

     where redir-op is one of the redirection operators mentioned previously.  Following is a
     list of the possible redirections. The [n] is an optional number, as in '3' (not '[3]', that
     refers to a file descriptor.

	   [n]> file   Redirect standard output (or n) to file.

	   [n]>| file  Same, but override the -C option.

	   [n]>> file  Append standard output (or n) to file.

	   [n]< file   Redirect standard input (or n) from file.

	   [n1]<&n2    Duplicate standard input (or n1) from file descriptor n2.

	   [n]<&-      Close standard input (or n).

	   [n1]>&n2    Duplicate standard output (or n1) from n2.

	   [n]>&-      Close standard output (or n).

	   [n]<> file  Open file for reading and writing on standard input (or n).

     The following redirection is often called a ``here-document''.

	   [n]<< delimiter

     All the text on successive lines up to the delimiter is saved away and made available to the
     command on standard input, or file descriptor n if it is specified.  If the delimiter as
     specified on the initial line is quoted, then the here-doc-text is treated literally, other-
     wise the text is subjected to parameter expansion, command substitution, and arithmetic
     expansion (as described in the section on ``Expansions'').  If the operator is ``<<-''
     instead of ``<<'', then leading tabs in the here-doc-text are stripped.

   Search and Execution
     There are three types of commands: shell functions, builtin commands, and normal programs --
     and the command is searched for (by name) in that order.  They each are executed in a dif-
     ferent way.

     When a shell function is executed, all of the shell positional parameters (except $0, which
     remains unchanged) are set to the arguments of the shell function. The variables which are
     explicitly placed in the environment of the command (by placing assignments to them before
     the function name) are made local to the function and are set to the values given. Then the
     command given in the function definition is executed.  The positional parameters are
     restored to their original values when the command completes. This all occurs within the
     current shell.

     Shell builtins are executed internally to the shell, without spawning a new process.

     Otherwise, if the command name doesn't match a function or builtin, the command is searched
     for as a normal program in the filesystem (as described in the next section). When a normal
     program is executed, the shell runs the program, passing the arguments and the environment
     to the program. If the program is not a normal executable file (i.e., if it does not begin
     with the "magic number" whose ASCII representation is "#!", so execve(2) returns ENOEXEC
     then) the shell will interpret the program in a subshell.	The child shell will reinitialize
     itself in this case, so that the effect will be as if a new shell had been invoked to handle
     the ad-hoc shell script, except that the location of hashed commands located in the parent
     shell will be remembered by the child.

     Note that previous versions of this document and the source code itself misleadingly and
     sporadically refer to a shell script without a magic number as a "shell procedure".

   Path Search
     When locating a command, the shell first looks to see if it has a shell function by that
     name.  Then it looks for a builtin command by that name.  If a builtin command is not found,
     one of two things happen:

     1.   Command names containing a slash are simply executed without performing any searches.

     2.   The shell searches each entry in PATH in turn for the command. The value of the PATH
	  variable should be a series of entries separated by colons.  Each entry consists of a
	  directory name. The current directory may be indicated implicitly by an empty directory
	  name, or explicitly by a single period.

   Command Exit Status
     Each command has an exit status that can influence the behavior of other shell commands.
     The paradigm is that a command exits with zero for normal or success, and non-zero for fail-
     ure, error, or a false indication.  The man page for each command should indicate the vari-
     ous exit codes and what they mean.  Additionally, the builtin commands return exit codes, as
     does an executed shell function.

   Complex Commands
     Complex commands are combinations of simple commands with control operators or reserved
     words, together creating a larger complex command.  More generally, a command is one of the

     o	 simple command

     o	 pipeline

     o	 list or compound-list

     o	 compound command

     o	 function definition

     Unless otherwise stated, the exit status of a command is that of the last simple command
     executed by the command.

     A pipeline is a sequence of one or more commands separated by the control operator |.  The
     standard output of all but the last command is connected to the standard input of the next
     command.  The standard output of the last command is inherited from the shell, as usual.

     The format for a pipeline is:

	   [!] command1 [| command2 ...]

     The standard output of command1 is connected to the standard input of command2. The standard
     input, standard output, or both of a command is considered to be assigned by the pipeline
     before any redirection specified by redirection operators that are part of the command.

     If the pipeline is not in the background (discussed later), the shell waits for all commands
     to complete.

     If the reserved word ! does not precede the pipeline, the exit status is the exit status of
     the last command specified in the pipeline.  Otherwise, the exit status is the logical NOT
     of the exit status of the last command.  That is, if the last command returns zero, the exit
     status is 1; if the last command returns greater than zero, the exit status is zero.

     Because pipeline assignment of standard input or standard output or both takes place before
     redirection, it can be modified by redirection.  For example:

	   $ command1 2>&1 | command2

     sends both the standard output and standard error of command1 to the standard input of com-

     A ; or <newline> terminator causes the preceding AND-OR-list (described next) to be executed
     sequentially; a & causes asynchronous execution of the preceding AND-OR-list.

     Note that unlike some other shells, each process in the pipeline is a child of the invoking
     shell (unless it is a shell builtin, in which case it executes in the current shell -- but
     any effect it has on the environment is wiped).

   Background Commands -- &
     If a command is terminated by the control operator ampersand (&), the shell executes the
     command asynchronously -- that is, the shell does not wait for the command to finish before
     executing the next command.

     The format for running a command in background is:

	   command1 & [command2 & ...]

     If the shell is not interactive, the standard input of an asynchronous command is set to

   Lists -- Generally Speaking
     A list is a sequence of zero or more commands separated by newlines, semicolons, or amper-
     sands, and optionally terminated by one of these three characters. The commands in a list
     are executed in the order they are written. If command is followed by an ampersand, the
     shell starts the command and immediately proceed onto the next command; otherwise it waits
     for the command to terminate before proceeding to the next one.

   Short-Circuit List Operators
     ``&&'' and ``||'' are AND-OR list operators.  ``&&'' executes the first command, and then
     executes the second command iff the exit status of the first command is zero.  ``||'' is
     similar, but executes the second command iff the exit status of the first command is
     nonzero.  ``&&'' and ``||'' both have the same priority.

   Flow-Control Constructs -- if, while, for, case
     The syntax of the if command is

	   if list
	   then list
	   [ elif list
	   then    list ] ...
	   [ else list ]

     The syntax of the while command is

	   while list
	   do	list

     The two lists are executed repeatedly while the exit status of the first list is zero.  The
     until command is similar, but has the word until in place of while, which causes it to
     repeat until the exit status of the first list is zero.

     The syntax of the for command is

	   for variable in word...
	   do	list

     The words are expanded, and then the list is executed repeatedly with the variable set to
     each word in turn.  do and done may be replaced with ``{'' and ``}''.

     The syntax of the break and continue command is

	   break [ num ]
	   continue [ num ]

     Break terminates the num innermost for or while loops.  Continue continues with the next
     iteration of the innermost loop.  These are implemented as builtin commands.

     The syntax of the case command is

	   case word in
	   pattern) list ;;

     The pattern can actually be one or more patterns (see Shell Patterns described later), sepa-
     rated by ``|'' characters.

   Grouping Commands Together
     Commands may be grouped by writing either



	   { list; }

     The first of these executes the commands in a subshell. Builtin commands grouped into a
     (list) will not affect the current shell. The second form does not fork another shell so is
     slightly more efficient. Grouping commands together this way allows you to redirect their
     output as though they were one program:

	   { printf " hello " ; printf " world\n" ; } > greeting

     The syntax of a function definition is

	   name () command

     A function definition is an executable statement; when executed it installs a function named
     name and returns an exit status of zero.  The command is normally a list enclosed between
     ``{'' and ``}''.

     Variables may be declared to be local to a function by using a local command.  This should
     appear as the first statement of a function, and the syntax is

	   local [variable | -] ...

     Local is implemented as a builtin command.

     When a variable is made local, it inherits the initial value and exported and readonly flags
     from the variable with the same name in the surrounding scope, if there is one.  Otherwise,
     the variable is initially unset.  The shell uses dynamic scoping, so that if you make the
     variable x local to function f, which then calls function g, references to the variable x
     made inside g will refer to the variable x declared inside f, not to the global variable
     named x.

     The only special parameter than can be made local is ``-''.  Making ``-'' local any shell
     options that are changed via the set command inside the function to be restored to their
     original values when the function returns.

     The syntax of the return command is

	   return [exitstatus]

     It terminates the currently executing function.  Return is implemented as a builtin command.

   Variables and Parameters
     The shell maintains a set of parameters.  A parameter denoted by a name is called a vari-
     able. When starting up, the shell turns all the environment variables into shell variables.
     New variables can be set using the form


     Variables set by the user must have a name consisting solely of alphabetics, numerics, and
     underscores - the first of which must not be numeric.  A parameter can also be denoted by a
     number or a special character as explained below.

   Positional Parameters
     A positional parameter is a parameter denoted by a number (n > 0). The shell sets these ini-
     tially to the values of its command line arguments that follow the name of the shell script.
     The set(1) builtin can also be used to set or reset them.

   Special Parameters
     A special parameter is a parameter denoted by one of the following special characters.  The
     value of the parameter is listed next to its character.

     *		  Expands to the positional parameters, starting from one.  When the expansion
		  occurs within a double-quoted string it expands to a single field with the
		  value of each parameter separated by the first character of the IFS variable,
		  or by a <space> if IFS is unset.

     @		  Expands to the positional parameters, starting from one.  When the expansion
		  occurs within double-quotes, each positional parameter expands as a separate
		  argument.  If there are no positional parameters, the expansion of @ generates
		  zero arguments, even when @ is double-quoted.  What this basically means, for
		  example, is if $1 is ``abc'' and $2 is ``def ghi'', then "$@" expands to the
		  two arguments:

			"abc" "def ghi"

     #		  Expands to the number of positional parameters.

     ?		  Expands to the exit status of the most recent pipeline.

     - (Hyphen.)  Expands to the current option flags (the single-letter option names concate-
		  nated into a string) as specified on invocation, by the set builtin command, or
		  implicitly by the shell.

     $		  Expands to the process ID of the invoked shell.  A subshell retains the same
		  value of $ as its parent.

     !		  Expands to the process ID of the most recent background command executed from
		  the current shell.  For a pipeline, the process ID is that of the last command
		  in the pipeline.

     0 (Zero.)	  Expands to the name of the shell or shell script.

   Word Expansions
     This clause describes the various expansions that are performed on words.	Not all expan-
     sions are performed on every word, as explained later.

     Tilde expansions, parameter expansions, command substitutions, arithmetic expansions, and
     quote removals that occur within a single word expand to a single field.  It is only field
     splitting or pathname expansion that can create multiple fields from a single word. The sin-
     gle exception to this rule is the expansion of the special parameter @ within double-quotes,
     as was described above.

     The order of word expansion is:

     1.   Tilde Expansion, Parameter Expansion, Command Substitution, Arithmetic Expansion (these
	  all occur at the same time).

     2.   Field Splitting is performed on fields generated by step (1) unless the IFS variable is

     3.   Pathname Expansion (unless set -f is in effect).

     4.   Quote Removal.

     The $ character is used to introduce parameter expansion, command substitution, or arith-
     metic evaluation.

   Tilde Expansion (substituting a user's home directory)
     A word beginning with an unquoted tilde character (~) is subjected to tilde expansion.  All
     the characters up to a slash (/) or the end of the word are treated as a username and are
     replaced with the user's home directory.  If the username is missing (as in ~/foobar), the
     tilde is replaced with the value of the HOME variable (the current user's home directory).

   Parameter Expansion
     The format for parameter expansion is as follows:


     where expression consists of all characters until the matching ``}''.  Any ``}'' escaped by
     a backslash or within a quoted string, and characters in embedded arithmetic expansions,
     command substitutions, and variable expansions, are not examined in determining the matching

     The simplest form for parameter expansion is:


     The value, if any, of parameter is substituted.

     The parameter name or symbol can be enclosed in braces, which are optional except for posi-
     tional parameters with more than one digit or when parameter is followed by a character that
     could be interpreted as part of the name.	If a parameter expansion occurs inside double-

     1.   Pathname expansion is not performed on the results of the expansion.

     2.   Field splitting is not performed on the results of the expansion, with the exception of

     In addition, a parameter expansion can be modified by using one of the following formats.

     ${parameter:-word}    Use Default Values.	If parameter is unset or null, the expansion of
			   word is substituted; otherwise, the value of parameter is substituted.

     ${parameter:=word}    Assign Default Values.  If parameter is unset or null, the expansion
			   of word is assigned to parameter.  In all cases, the final value of
			   parameter is substituted.  Only variables, not positional parameters
			   or special parameters, can be assigned in this way.

     ${parameter:?[word]}  Indicate Error if Null or Unset.  If parameter is unset or null, the
			   expansion of word (or a message indicating it is unset if word is
			   omitted) is written to standard error and the shell exits with a
			   nonzero exit status.  Otherwise, the value of parameter is substi-
			   tuted.  An interactive shell need not exit.

     ${parameter:+word}    Use Alternative Value.  If parameter is unset or null, null is substi-
			   tuted; otherwise, the expansion of word is substituted.

     In the parameter expansions shown previously, use of the colon in the format results in a
     test for a parameter that is unset or null; omission of the colon results in a test for a
     parameter that is only unset.

     ${#parameter}	   String Length.  The length in characters of the value of parameter.

     The following four varieties of parameter expansion provide for substring processing.  In
     each case, pattern matching notation (see Shell Patterns), rather than regular expression
     notation, is used to evaluate the patterns.  If parameter is * or @, the result of the
     expansion is unspecified.	Enclosing the full parameter expansion string in double-quotes
     does not cause the following four varieties of pattern characters to be quoted, whereas
     quoting characters within the braces has this effect.

     ${parameter%word}	   Remove Smallest Suffix Pattern.  The word is expanded to produce a
			   pattern.  The parameter expansion then results in parameter, with the
			   smallest portion of the suffix matched by the pattern deleted.

     ${parameter%%word}    Remove Largest Suffix Pattern.  The word is expanded to produce a pat-
			   tern.  The parameter expansion then results in parameter, with the
			   largest portion of the suffix matched by the pattern deleted.

     ${parameter#word}	   Remove Smallest Prefix Pattern.  The word is expanded to produce a
			   pattern.  The parameter expansion then results in parameter, with the
			   smallest portion of the prefix matched by the pattern deleted.

     ${parameter##word}    Remove Largest Prefix Pattern.  The word is expanded to produce a pat-
			   tern.  The parameter expansion then results in parameter, with the
			   largest portion of the prefix matched by the pattern deleted.

   Command Substitution
     Command substitution allows the output of a command to be substituted in place of the com-
     mand name itself.	Command substitution occurs when the command is enclosed as follows:


     or (``backquoted'' version):


     The shell expands the command substitution by executing command in a subshell environment
     and replacing the command substitution with the standard output of the command, removing
     sequences of one or more <newline>s at the end of the substitution.  (Embedded <newline>s
     before the end of the output are not removed; however, during field splitting, they may be
     translated into <space>s, depending on the value of IFS and quoting that is in effect.)

   Arithmetic Expansion
     Arithmetic expansion provides a mechanism for evaluating an arithmetic expression and sub-
     stituting its value. The format for arithmetic expansion is as follows:


     The expression is treated as if it were in double-quotes, except that a double-quote inside
     the expression is not treated specially.  The shell expands all tokens in the expression for
     parameter expansion, command substitution, and quote removal.

     Next, the shell treats this as an arithmetic expression and substitutes the value of the

   White Space Splitting (Field Splitting)
     After parameter expansion, command substitution, and arithmetic expansion the shell scans
     the results of expansions and substitutions that did not occur in double-quotes for field
     splitting and multiple fields can result.

     The shell treats each character of the IFS as a delimiter and use the delimiters to split
     the results of parameter expansion and command substitution into fields.

   Pathname Expansion (File Name Generation)
     Unless the -f flag is set, file name generation is performed after word splitting is com-
     plete.  Each word is viewed as a series of patterns, separated by slashes.  The process of
     expansion replaces the word with the names of all existing files whose names can be formed
     by replacing each pattern with a string that matches the specified pattern. There are two
     restrictions on this: first, a pattern cannot match a string containing a slash, and second,
     a pattern cannot match a string starting with a period unless the first character of the
     pattern is a period. The next section describes the patterns used for both Pathname Expan-
     sion and the case(1) command.

   Shell Patterns
     A pattern consists of normal characters, which match themselves, and meta-characters.   The
     meta-characters are ``!'', ``*'', ``?'', and ``[''.  These characters lose their special
     meanings if they are quoted.  When command or variable substitution is performed and the
     dollar sign or back quotes are not double quoted, the value of the variable or the output of
     the command is scanned for these characters and they are turned into meta-characters.

     An asterisk (``*'') matches any string of characters.  A question mark matches any single
     character. A left bracket (``['') introduces a character class.  The end of the character
     class is indicated by a (``]''); if the ``]'' is missing then the ``['' matches a ``[''
     rather than introducing a character class.  A character class matches any of the characters
     between the square brackets.  A range of characters may be specified using a minus sign. The
     character class may be complemented by making an exclamation point the first character of
     the character class.

     To include a ``]'' in a character class, make it the first character listed (after the
     ``!'', if any).  To include a minus sign, make it the first or last character listed

     This section lists the builtin commands which are builtin because they need to perform some
     operation that can't be performed by a separate process. In addition to these, there are
     several other commands that may be builtin for efficiency (e.g.  printf(1), echo(1),
     test(1), etc).

     :	    A null command that returns a 0 (true) exit value.

     . file
	    The commands in the specified file are read and executed by the shell.

     alias [name[=string ...]]
	    If name=string is specified, the shell defines the alias name with value string.  If
	    just name is specified, the value of the alias name is printed. With no arguments,
	    the alias builtin prints the names and values of all defined aliases (see unalias).

     bg [job] ...
	    Continue the specified jobs (or the current job if no jobs are given) in the back-

     command command arg...
	    Execute the specified builtin command.  (This is useful when you have a shell func-
	    tion with the same name as a builtin command.)

     cd [directory]
	    Switch to the specified directory (default $HOME).	If an entry for CDPATH appears in
	    the environment of the cd command or the shell variable CDPATH is set and the direc-
	    tory name does not begin with a slash, then the directories listed in CDPATH will be
	    searched for the specified directory.  The format of CDPATH is the same as that of
	    PATH.  In an interactive shell, the cd command will print out the name of the direc-
	    tory that it actually switched to if this is different from the name that the user
	    gave.  These may be different either because the CDPATH mechanism was used or because
	    a symbolic link was crossed.

     eval string...
	    Concatenate all the arguments with spaces.	Then re-parse and execute the command.

     exec [command arg...]
	    Unless command is omitted, the shell process is replaced with the specified program
	    (which must be a real program, not a shell builtin or function).  Any redirections on
	    the exec command are marked as permanent, so that they are not undone when the exec
	    command finishes.

     exit [exitstatus]
	    Terminate the shell process.  If exitstatus is given it is used as the exit status of
	    the shell; otherwise the exit status of the preceding command is used.

     export name...

     export -p
	    The specified names are exported so that they will appear in the environment of sub-
	    sequent commands. The only way to un-export a variable is to unset it. The shell
	    allows the value of a variable to be set at the same time it is exported by writing

		  export name=value

	    With no arguments the export command lists the names of all exported variables.  With
	    the -p option specified the output will be formatted suitably for non-interactive

     fc [-e editor] [first [last]]

     fc -l [-nr] [first [last]]

     fc -s [old=new] [first]
	    The fc builtin lists, or edits and re-executes, commands previously entered to an
	    interactive shell.

	    -e editor
		   Use the editor named by editor to edit the commands.  The editor string is a
		   command name, subject to search via the PATH variable.  The value in the
		   FCEDIT variable is used as a default when -e is not specified.  If FCEDIT is
		   null or unset, the value of the EDITOR variable is used.  If EDITOR is null or
		   unset, ed(1) is used as the editor.

	    -l (ell)
		   List the commands rather than invoking an editor on them.  The commands are
		   written in the sequence indicated by the first and last operands, as affected
		   by -r, with each command preceded by the command number.

	    -n	   Suppress command numbers when listing with -l.

	    -r	   Reverse the order of the commands listed (with -l) or edited (with neither -l
		   nor -s).

	    -s	   Re-execute the command without invoking an editor.


	    last   Select the commands to list or edit.  The number of previous commands that can
		   be accessed are determined by the value of the HISTSIZE variable.  The value
		   of first or last or both are one of the following:

			  A positive number representing a command number; command numbers can be
			  displayed with the -l option.

			  A negative decimal number representing the command that was executed
			  number of commands previously.  For example, -1 is the immediately pre-
			  vious command.

		   A string indicating the most recently entered command that begins with that
		   string.  If the old=new operand is not also specified with -s, the string form
		   of the first operand cannot contain an embedded equal sign.

	    The following environment variables affect the execution of fc:

	    FCEDIT    Name of the editor to use.

	    HISTSIZE  The number of previous commands that are accessible.

     fg [job]
	    Move the specified job or the current job to the foreground.

     getopts optstring var
	    The POSIX getopts command, not to be confused with the Bell Labs -derived getopt(1).

	    The first argument should be a series of letters, each of which may be optionally
	    followed by a colon to indicate that the option requires an argument.  The variable
	    specified is set to the parsed option.

	    The getopts command deprecates the older getopt(1) utility due to its handling of
	    arguments containing whitespace.

	    The getopts builtin may be used to obtain options and their arguments from a list of
	    parameters.  When invoked, getopts places the value of the next option from the
	    option string in the list in the shell variable specified by var and it's index in
	    the shell variable OPTIND.	When the shell is invoked, OPTIND is initialized to 1.
	    For each option that requires an argument, the getopts builtin will place it in the
	    shell variable OPTARG.  If an option is not allowed for in the optstring, then OPTARG
	    will be unset.

	    optstring is a string of recognized option letters (see getopt(3)).  If a letter is
	    followed by a colon, the option is expected to have an argument which may or may not
	    be separated from it by white space.  If an option character is not found where
	    expected, getopts will set the variable var to a ``?''; getopts will then unset
	    OPTARG and write output to standard error.	By specifying a colon as the first char-
	    acter of optstring all errors will be ignored.

	    A nonzero value is returned when the last option is reached.  If there are no remain-
	    ing arguments, getopts will set var to the special option, ``--'', otherwise, it will
	    set var to ``?''.

	    The following code fragment shows how one might process the arguments for a command
	    that can take the options [a] and [b], and the option [c], which requires an argu-

		  while getopts abc: f
			  case $f in
			  a | b)  flag=$f;;
			  c)	  carg=$OPTARG;;
			  \?)	  echo $USAGE; exit 1;;
		  shift `expr $OPTIND - 1`

	    This code will accept any of the following as equivalent:

		  cmd -acarg file file
		  cmd -a -c arg file file
		  cmd -carg -a file file
		  cmd -a -carg -- file file

     hash -rv command...
	    The shell maintains a hash table which remembers the locations of commands.  With no
	    arguments whatsoever, the hash command prints out the contents of this table.
	    Entries which have not been looked at since the last cd command are marked with an
	    asterisk; it is possible for these entries to be invalid.

	    With arguments, the hash command removes the specified commands from the hash table
	    (unless they are functions) and then locates them.	With the -v option, hash prints
	    the locations of the commands as it finds them.  The -r option causes the hash com-
	    mand to delete all the entries in the hash table except for functions.

     jobid [job]
	    Print the process id's of the processes in the job.  If the job argument is omitted,
	    the current job is used.

     jobs   This command lists out all the background processes which are children of the current
	    shell process.

     pwd    Print the current directory.  The builtin command may differ from the program of the
	    same name because the builtin command remembers what the current directory is rather
	    than recomputing it each time.  This makes it faster.  However, if the current direc-
	    tory is renamed, the builtin version of pwd will continue to print the old name for
	    the directory.

     read [-p prompt] [-r] variable...
	    The prompt is printed if the -p option is specified and the standard input is a ter-
	    minal.  Then a line is read from the standard input.  The trailing newline is deleted
	    from the line and the line is split as described in the section on word splitting
	    above, and the pieces are assigned to the variables in order.  At least one variable
	    must be specified.	If there are more pieces than variables, the remaining pieces
	    (along with the characters in IFS that separated them) are assigned to the last vari-
	    able. If there are more variables than pieces, the remaining variables are assigned
	    the null string. The read builtin will indicate success unless EOF is encountered on
	    input, in which case failure is returned.

	    By default, unless the -r option is specified, the backslash ``\'' acts as an escape
	    character, causing the following character to be treated literally.  If a backslash
	    is followed by a newline, the backslash and the newline will be deleted.

     readonly name...

     readonly -p
	    The specified names are marked as read only, so that they cannot be subsequently mod-
	    ified or unset.  The shell allows the value of a variable to be set at the same time
	    it is marked read only by writing

		  readonly name=value

	    With no arguments the readonly command lists the names of all read only variables.
	    With the -p option specified the output will be formatted suitably for non-interac-
	    tive use.

     set [{ -options | +options | -- }] arg...
	    The set command performs three different functions.

	    With no arguments, it lists the values of all shell variables.

	    If options are given, it sets the specified option flags, or clears them as described
	    in the section called Argument List Processing.

	    The third use of the set command is to set the values of the shell's positional
	    parameters to the specified args.  To change the positional parameters without chang-
	    ing any options, use ``--'' as the first argument to set.  If no args are present,
	    the set command will clear all the positional parameters (equivalent to executing
	    ``shift $#''.)

     setvar variable value
	    Assigns value to variable. (In general it is better to write variable=value rather
	    than using setvar.	setvar is intended to be used in functions that assign values to
	    variables whose names are passed as parameters.)

     shift [n]
	    Shift the positional parameters n times.  A shift sets the value of $1 to the value
	    of $2, the value of $2 to the value of $3, and so on, decreasing the value of $# by
	    one. If n is greater than the number of positional parameters, shift will issue an
	    error message, and exit with return status 2.

     times  Print the accumulated user and system times for the shell and for processes run from
	    the shell.	The return status is 0.

     trap action signal...
	    Cause the shell to parse and execute action when any of the specified signals are
	    received. The signals are specified by signal number. If signal is 0, the action is
	    executed when the shell exits.  action may be null or ``-''; the former causes the
	    specified signal to be ignored and the latter causes the default action to be taken.
	    When the shell forks off a subshell, it resets trapped (but not ignored) signals to
	    the default action. The trap command has no effect on signals that were ignored on
	    entry to the shell.

     type [name ...]
	    Interpret each name as a command and print the resolution of the command search. Pos-
	    sible resolutions are: shell keyword, alias, shell builtin, command, tracked alias
	    and not found.  For aliases the alias expansion is printed; for commands and tracked
	    aliases the complete pathname of the command is printed.

     ulimit [-H | -S] [-a | -tfdscmlpn [value]]
	    Inquire about or set the hard or soft limits on processes or set new limits. The
	    choice between hard limit (which no process is allowed to violate, and which may not
	    be raised once it has been lowered) and soft limit (which causes processes to be sig-
	    naled but not necessarily killed, and which may be raised) is made with these flags:

	    -H		set or inquire about hard limits

	    -S		set or inquire about soft limits. If neither -H nor -S is specified, the
			soft limit is displayed or both limits are set. If both are specified,
			the last one wins.

	    The limit to be interrogated or set, then, is chosen by specifying any one of these

	    -a		show all the current limits

	    -t		show or set the limit on CPU time (in seconds)

	    -f		show or set the limit on the largest file that can be created (in
			512-byte blocks)

	    -d		show or set the limit on the data segment size of a process (in kilo-

	    -s		show or set the limit on the stack size of a process (in kilobytes)

	    -c		show or set the limit on the largest core dump size that can be produced
			(in 512-byte blocks)

	    -m		show or set the limit on the total physical memory that can be in use by
			a process (in kilobytes)

	    -l		show or set the limit on how much memory a process can lock with mlock(2)
			(in kilobytes)

	    -p		show or set the limit on the number of processes this user can have at
			one time

	    -n		show or set the limit on the number files a process can have open at once

	    If none of these is specified, it is the limit on file size that is shown or set. If
	    value is specified, the limit is set to that number; otherwise the current limit is

	    Limits of an arbitrary process can be displayed or set using the sysctl(8) utility.

     umask [mask]
	    Set the value of umask (see umask(2)) to the specified octal value. If the argument
	    is omitted, the umask value is printed.

     unalias [-a] [name]
	    If name is specified, the shell removes that alias. If -a is specified, all aliases
	    are removed.

     unset name...
	    The specified variables and functions are unset and unexported. If a given name cor-
	    responds to both a variable and a function, both the variable and the function are

     wait [job]
	    Wait for the specified job to complete and return the exit status of the last process
	    in the job. If the argument is omitted, wait for all jobs to complete and the return
	    an exit status of zero.

   Command Line Editing
     When sh is being used interactively from a terminal, the current command and the command
     history (see fc in Builtins) can be edited using vi-mode command-line editing. This mode
     uses commands, described below, similar to a subset of those described in the vi man page.
     The command 'set -o vi' enables vi-mode editing and place sh into vi insert mode. With vi-
     mode enabled, sh can be switched between insert mode and command mode. The editor is not
     described in full here, but will be in a later document.  It's similar to vi: typing <ESC>
     will throw you into command VI command mode. Hitting <return> while in command mode will
     pass the line to the shell.

     HOME	Set automaticly by login(1) from the user's login directory in the password file
		(passwd(4)).  This environment variable also functions as the default argument
		for the cd builtin.

     PATH	The default search path for executables.  See the above section Path Search.

     CDPATH	The search path used with the cd builtin.

     MAIL	The name of a mail file, that will be checked for the arrival of new mail.  Over-
		ridden by MAILPATH.

     MAILCHECK	The frequency in seconds that the shell checks for the arrival of mail in the
		files specified by the MAILPATH or the MAIL file.  If set to 0, the check will
		occur at each prompt.

     MAILPATH	A colon ``:'' separated list of file names, for the shell to check for incoming
		mail.  This environment setting overrides the MAIL setting.  There is a maximum
		of 10 mailboxes that can be monitored at once.

     PS1	The primary prompt string, which defaults to ``$  '', unless you are the supe-
		ruser, in which case it defaults to ``#  ''.

     PS2	The secondary prompt string, which defaults to ``>  ''.

     IFS	Input Field Separators.  This is normally set to <space> <tab> and <newline>.
		See the White Space Splitting section for more details.

     TERM	The default terminal setting for the shell.  This is inherited by children of the
		shell, and is used in the history editing modes.

     HISTSIZE	The number of lines in the history buffer for the shell.



     csh(1), getopt(1), ksh(1), login(1), test(1), getopt(3), passwd(4), profile(4), environ(5)

     A sh command appeared in Version 1 AT&T UNIX.  It was, however, unmaintainable so we wrote
     this one.

     Errors that are detected by the shell, such as a syntax error, will cause the shell to exit
     with a non-zero exit status.  If the shell is not an interactive shell, the execution of the
     shell file will be aborted.  Otherwise the shell will return the exit status of the last
     command executed, or if the exit builtin is used with a numeric argument, it will return the

     Setuid shell scripts should be avoided at all costs, as they are a significant security

BSD					 January 9, 1999				      BSD
Unix & Linux Commands & Man Pages : ©2000 - 2018 Unix and Linux Forums

All times are GMT -4. The time now is 06:16 PM.