Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

yum(8) [plan9 man page]

yum(8)																	    yum(8)

NAME
yum - Yellowdog Updater Modified SYNOPSIS
yum [options] [command] [package ...] DESCRIPTION
yum is an interactive, rpm based, package manager. It can automatically perform system updates, including dependency analysis and obsolete processing based on "repository" metadata. It can also perform installation of new packages, removal of old packages and perform queries on the installed and/or available packages among many other commands/services (see below). yum is similar to other high level package managers like apt-get and smart. While there are some graphical interfaces directly to the yum code, more recent graphical interface development is happening with Pack- ageKit and the gnome-packagekit application. command is one of: * install package1 [package2] [...] * update [package1] [package2] [...] * check-update * upgrade [package1] [package2] [...] * remove | erase package1 [package2] [...] * list [...] * info [...] * provides | whatprovides feature1 [feature2] [...] * clean [ packages | headers | metadata | dbcache | all ] * makecache * groupinstall group1 [group2] [...] * groupupdate group1 [group2] [...] * grouplist [hidden] [groupwildcard] [...] * groupremove group1 [group2] [...] * groupinfo group1 [...] * search string1 [string2] [...] * shell [filename] * resolvedep dep1 [dep2] [...] * localinstall rpmfile1 [rpmfile2] [...] * localupdate rpmfile1 [rpmfile2] [...] * reinstall package1 [package2] [...] * downgrade package1 [package2] [...] * deplist package1 [package2] [...] * repolist [all|enabled|disabled] * version [all|installed|available|group-*|grouplist|groupinfo] * history [info|list|summary|redo|undo|new] * help [command] Unless the --help or -h option is given, one of the above commands must be present. Repository configuration is honored in all operations. install Is used to install the latest version of a package or group of packages while ensuring that all dependencies are satisfied. If no package matches the given package name(s), they are assumed to be a shell glob and any matches are then installed. If the name starts with an @ character the rest of the name is used as though passed to the groupinstall command. If the name is a file, then install works like localinstall. If the name doesn't match a package, then package "provides" are searched (Eg. "_sqlite- cache.so()(64bit)") as are filelists (Eg. "/usr/bin/yum"). Also note that for filelists, wildcards will match multiple packages. update If run without any packages, update will update every currently installed package. If one or more packages or package globs are specified, Yum will only update the listed packages. While updating packages, yum will ensure that all dependencies are satisfied. If the packages or globs specified match to packages which are not currently installed then update will not install them. update operates on groups, files, provides and filelists just like the "install" command. If the main obsoletes configure option is true (default) or the --obsoletes flag is present yum will include package obsoletes in its calculations - this makes it better for distro-version changes, for example: upgrading from somelinux 8.0 to somelinux 9. check-update Implemented so you could know if your machine had any updates that needed to be applied without running it interactively. Returns exit value of 100 if there are packages available for an update. Also returns a list of the packages to be updated in list format. Returns 0 if no packages are available for update. Returns 1 if an error occurred. Running in verbose mode also shows obsoletes. upgrade Is the same as the update command with the --obsoletes flag set. See update for more details. remove or erase Are used to remove the specified packages from the system as well as removing any packages which depend on the package being removed. remove operates on groups, files, provides and filelists just like the "install" command. list Is used to list various information about available packages; more complete details are available in the List Options section below. provides or whatprovides Is used to find out which package provides some feature or file. Just use a specific name or a file-glob-syntax wildcards to list the packages available or installed that provide that feature or file. search Is used to find any packages matching a string in the description, summary and package name fields of an rpm. Useful for finding a package you do not know by name but know by some word related to it. info Is used to list a description and summary information about available packages; takes the same arguments as in the List Options sec- tion below. clean Is used to clean up various things which accumulate in the yum cache directory over time. More complete details can be found in the Clean Options section below. makecache Is used to download and make usable all the metadata for the currently enabled yum repos. groupinstall Is used to install all of the individual packages in a group, of the specified types (this works as if you'd taken each of those package names and put them on the command line for a "yum install" command). The group_package_types configuration option specifies which types will be installed. groupupdate Is just an alias for groupinstall, which will do the right thing because "yum install X" and "yum update X" do the same thing, when X is already installed. grouplist Is used to list the available groups from all yum repos. Groups are marked as "installed" if all mandatory packages are installed, or if a group doesn't have any mandatory packages then it is installed if any of the optional or default package are installed. The optional "hidden" argument will also list groups marked as not being "user visible". If you pass the -v option, to enable verbose mode, then the groupids are displayed. groupremove Is used to remove all of the packages in a group, unlike "groupinstall" this will remove everything regardless of group_pack- age_types. It is worth pointing out that packages can be in more than one group, so "groupinstall X Y" followed by "groupremove Y" does not do give you the same result as "groupinstall X". groupinfo Is used to give the description and package list of a group (and which type those packages are marked as). Note that you can use the yum-filter-data and yum-list-data plugins to get/use the data the other way around (Ie. what groups own packages need updating). If you pass the -v option, to enable verbose mode, then the package names are matched against installed/available packages similar to the list command. shell Is used to enter the 'yum shell', when a filename is specified the contents of that file is executed in yum shell mode. See yum- shell(8) for more info resolvedep Is used to list packages providing the specified dependencies, at most one package is listed per dependency. localinstall Is used to install a set of local rpm files. If required the enabled repositories will be used to resolve dependencies. Note that the install command will do a local install, if given a filename. localupdate Is used to update the system by specifying local rpm files. Only the specified rpm files of which an older version is already installed will be installed, the remaining specified packages will be ignored. If required the enabled repositories will be used to resolve dependencies. Note that the update command will do a local install, if given a filename. reinstall Will reinstall the identically versioned package as is currently installed. This does not work for "installonly" packages, like Kernels. reinstall operates on groups, files, provides and filelists just like the "install" command. downgrade Will try and downgrade a package from the version currently installed to the previously highest version (or the specified version). The depsolver will not necessarily work, but if you specify all the packages it should work (and thus. all the simple cases will work). Also this does not work for "installonly" packages, like Kernels. downgrade operates on groups, files, provides and filelists just like the "install" command. deplist Produces a list of all dependencies and what packages provide those dependencies for the given packages. repolist Produces a list of configured repositories. The default is to list all enabled repositories. If you pass -v, for verbose mode, more information is listed. version Produces a "version" of the rpmdb, and of the enabled repositories if "all" is given as the first argument. You can also specify version groups in the version-groups config. file. If you pass -v, for verbose mode, more information is listed. The version is cal- culated by taking a sha1 hash of the packages (in sorted order), and the checksum_type/checksum_data entries from the yumdb. Note that this rpmdb version is now also used significantly within yum (esp. in yum history). history The history command allows the user to view what has happened in past transactions (assuming the history_record config. option is set). You can use info/list/summary to view what happened, undo/redo to act on that information and new to start a new history file. The info/list/summary commands take either a transactions id or a package (with wildcards, as in Specifying package names), all three can also be passed no arguments. list can be passed the keyword "all" to list all the transactions. undo/redo just take a transaction id. help Produces help, either for all commands or if given a command name then the help for that particular command. GENERAL OPTIONS
Most command line options can be set using the configuration file as well and the descriptions indicate the necessary configuration option to set. -h, --help Help; display a help message and then quit. -y Assume yes; assume that the answer to any question which would be asked is yes. Configuration Option: assumeyes -c [config file] Specifies the config file location - can take HTTP and FTP URLs and local file paths. -q, --quiet Run without output. Note that you likely also want to use -y. -v, --verbose Run with a lot of debugging output. -d [number] Sets the debugging level to [number] - turns up or down the amount of things that are printed. Practical range: 0 - 10 Configuration Option: debuglevel -e [number] Sets the error level to [number] Practical range 0 - 10. 0 means print only critical errors about which you must be told. 1 means print all errors, even ones that are not overly important. 1+ means print more errors (if any) -e 0 is good for cron jobs. Configuration Option: errorlevel -R [time in minutes] Sets the maximum amount of time yum will wait before performing a command - it randomizes over the time. -C Tells yum to run entirely from cache - does not download or update any headers unless it has to to perform the requested action. --version Reports the yum version number and installed package versions for everything in history_record_packages (can be added to by plug- ins). --showduplicates Doesn't limit packages to their latest versions in the info, list and search commands (will also affect plugins which use the doPackageLists() API). --installroot=root Specifies an alternative installroot, relative to which all packages will be installed. Configuration Option: installroot --enablerepo=repoidglob Enables specific repositories by id or glob that have been disabled in the configuration file using the enabled=0 option. Configuration Option: enabled --disablerepo=repoidglob Disables specific repositories by id or glob. Configuration Option: enabled --obsoletes This option only has affect for an update, it enables yum's obsoletes processing logic. For more information see the update command above. Configuration Option: obsoletes -x, --exclude=package Exclude a specific package by name or glob from updates on all repositories. Configuration Option: exclude --color=[always|auto|never] Display colorized output automatically, depending on the output terminal, always (using ANSI codes) or never. Note that some com- mands (Eg. list and info) will do a little extra work when color is enabled. Configuration Option: color --disableexcludes=[all|main|repoid] Disable the excludes defined in your config files. Takes one of three options: all == disable all excludes main == disable excludes defined in [main] in yum.conf repoid == disable excludes defined for that repo --disableplugin=plugin Run with one or more plugins disabled, the argument is a comma separated list of wildcards to match against plugin names. --noplugins Run with all plugins disabled. Configuration Option: plugins --nogpgcheck Run with GPG signature checking disabled. Configuration Option: gpgcheck --skip-broken Resolve depsolve problems by removing packages that are causing problems from the transaction. Configuration Option: skip_broken -t, --tolerant This option currently does nothing. LIST OPTIONS
The following are the ways which you can invoke yum in list mode. Note that all list commands include information on the version of the package. OUTPUT The format of the output of yum list is: name.arch ]version-release repo or @installed-from-repo yum list [all | glob_exp1] [glob_exp2] [...] List all available and installed packages. yum list available [glob_exp1] [...] List all packages in the yum repositories available to be installed. yum list updates [glob_exp1] [...] List all packages with updates available in the yum repositories. yum list installed [glob_exp1] [...] List the packages specified by args. If an argument does not match the name of an available package, it is assumed to be a shell-style glob and any matches are printed. yum list extras [glob_exp1] [...] List the packages installed on the system that are not available in any yum repository listed in the config file. yum list obsoletes [glob_exp1] [...] List the packages installed on the system that are obsoleted by packages in any yum repository listed in the config file. yum list recent List packages recently added into the repositories. Specifying package names All the list options mentioned above take file-glob-syntax wildcards or package names as arguments, for example yum list available 'foo*' will list all available packages that match 'foo*'. (The single quotes will keep your shell from expanding the globs.) CLEAN OPTIONS
The following are the ways which you can invoke yum in clean mode. Note that "all files" in the commands below means "all files in cur- rently enabled repositories". If you want to also clean any (temporarily) disabled repositories you need to use --enablerepo='*' option. yum clean expire-cache Eliminate the local data saying when the metadata and mirrorlists were downloaded for each repo. This means yum will revalidate the cache for each repo. next time it is used. However if the cache is still valid, nothing significant was deleted. yum clean packages Eliminate any cached packages from the system. Note that packages are not automatically deleted after they are downloaded. yum clean headers Eliminate all of the header files which yum uses for dependency resolution. yum clean metadata Eliminate all of the files which yum uses to determine the remote availability of packages. Using this option will force yum to download all the metadata the next time it is run. yum clean dbcache Eliminate the sqlite cache used for faster access to metadata. Using this option will force yum to recreate the cache the next time it is run. yum clean all Runs yum clean packages and yum clean headers, yum clean metadata and yum clean dbcache as above. MISC
Specifying package names A package can be referred to for install,update,list,remove etc with any of the following: name name.arch name-ver name-ver-rel name-ver-rel.arch name-epoch:ver-rel.arch epoch:name-ver-rel.arch For example: yum remove kernel-2.4.1-10.i686 PLUGINS
Yum can be extended through the use of plugins. A plugin is a Python ".py" file which is installed in one of the directories specified by the pluginpath option in yum.conf. For a plugin to work, the following conditions must be met: 1. The plugin module file must be installed in the plugin path as just described. 2. The global plugins option in /etc/yum/yum.conf must be set to `1'. 3. A configuration file for the plugin must exist in /etc/yum/pluginconf.d/<plugin_name>.conf and the enabled setting in this file must set to `1'. The minimal content for such a configuration file is: [main] enabled = 1 See the yum.conf(5) man page for more information on plugin related configuration options. FILES
/etc/yum/yum.conf /etc/yum/version-groups.conf /etc/yum/repos.d/ /etc/yum/pluginconf.d/ /var/cache/yum/ SEE ALSO
pkcon (1) yum.conf (5) yum-updatesd (8) package-cleanup (1) repoquery (1) yum-complete-transaction (1) yumdownloader (1) yum-utils (1) http://yum.baseurl.org/ http://yum.baseurl.org/wiki/Faq yum search yum AUTHORS
See the Authors file included with this program. BUGS
There of course aren't any bugs, but if you find any, you should first consult the FAQ mentioned above and then email the mailing list: yum@lists.baseurl.org or filed in bugzilla. Seth Vidal yum(8)
Man Page