Visit Our UNIX and Linux User Community

Linux and UNIX Man Pages

Test Your Knowledge in Computers #850
Difficulty: Medium
Every Bluetooth device has a unique 48-bit address.
True or False?
Linux & Unix Commands - Search Man Pages

ng_atmllc(4) [plan9 man page]

NG_ATMLLC(4)						   BSD Kernel Interfaces Manual 					      NG_ATMLLC(4)

NAME
ng_atmllc -- ATM LLC netgraph node type SYNOPSIS
#include <netgraph/ng_atmllc.h> DESCRIPTION
The atmllc node type translates frames in to and out of ATM LLC encapsulation, as specified by RFC 1483. In LLC encapsulation the protocol of a given protocol data unit (PDU) is specified by an IEEE 802.2 LLC header, possibly followed by an IEEE 802.1a SubNetwork Attachment Point (SNAP) header. This node currently handles the Ethernet and FDDI protocols. The node transmits and receives ATM PDUs on the atm hook. Received PDUs are decoded and forwarded to the ether or fddi hooks as appropriate. Data received on the ether or fddi hooks are assumed to be full Ethernet or FDDI packets as appropriate and are encapsulated into a PDU and transmitted via the atm hook. HOOKS
This node type supports the following hooks: atm ATM connection. Typically, this hook would be connected to a ng_atm(4) node, which handles transmission of ATM PDUs over an ATM device. ether Ethernet connection. This hook sends and receives Ethernet frames. This would normally be connected to an ng_eiface(4) node if in use. fddi FDDI connection. This hook sends and receives FDDI frames. CONTROL MESSAGES
This node type supports the generic control messages. SHUTDOWN
This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have been disconnected. SEE ALSO
netgraph(4), ng_atm(4), ng_eiface(4), ngctl(8) J. Heinanen, Multiprotocol Encapsulation over ATM Adaptation Layer 5, RFC 1483. AUTHORS
Benno Rice <benno@FreeBSD.org> BSD
March 8, 2004 BSD

Check Out this Related Man Page

NG_ATMLLC(4)						   BSD Kernel Interfaces Manual 					      NG_ATMLLC(4)

NAME
ng_atmllc -- ATM LLC netgraph node type SYNOPSIS
#include <netgraph/ng_atmllc.h> DESCRIPTION
The atmllc node type translates frames in to and out of ATM LLC encapsulation, as specified by RFC 1483. In LLC encapsulation the protocol of a given protocol data unit (PDU) is specified by an IEEE 802.2 LLC header, possibly followed by an IEEE 802.1a SubNetwork Attachment Point (SNAP) header. This node currently handles the Ethernet and FDDI protocols. The node transmits and receives ATM PDUs on the atm hook. Received PDUs are decoded and forwarded to the ether or fddi hooks as appropriate. Data received on the ether or fddi hooks are assumed to be full Ethernet or FDDI packets as appropriate and are encapsulated into a PDU and transmitted via the atm hook. HOOKS
This node type supports the following hooks: atm ATM connection. Typically, this hook would be connected to a ng_atm(4) node, which handles transmission of ATM PDUs over an ATM device. ether Ethernet connection. This hook sends and receives Ethernet frames. This would normally be connected to an ng_eiface(4) node if in use. fddi FDDI connection. This hook sends and receives FDDI frames. CONTROL MESSAGES
This node type supports the generic control messages. SHUTDOWN
This node shuts down upon receipt of a NGM_SHUTDOWN control message, or when all hooks have been disconnected. SEE ALSO
netgraph(4), ng_atm(4), ng_eiface(4), ngctl(8) J. Heinanen, Multiprotocol Encapsulation over ATM Adaptation Layer 5, RFC 1483. AUTHORS
Benno Rice <benno@FreeBSD.org> BSD
March 8, 2004 BSD

6 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

How to change Raw data to Coloumn data fields

Dear All, I have some data file.see below. --------------ALARM CLEARING FROM SubNetwork=ONRM_RootMo,SubNetwork=AXE,ManagedElement=CGSN-------------- Alarm Record ID: 25196304 Event Time: 2006-08-28 13:41:35 Event Type: ... (1 Reply)
Discussion started by: Nayanajith
1 Replies

2. AIX

teaming

How to do ether port teaming in aix??????? (1 Reply)
Discussion started by: vjm
1 Replies

3. Homework & Coursework Questions

Client/server atm with sockets

Hello everyone!I would appreciate any help you could give me,I have to make a program of an atm machine using client server sockets and semaphores.I know how to construct an ATM in c++ but don't know anything about unix c.The problem is that Don't know what to do and how to link the two programs... (0 Replies)
Discussion started by: tamanas
0 Replies

4. AIX

IVM

Can somebody help me on IVM? I have installed vio 2.2 on a js21 server. It has 2 physical ether ports, what I want to do is create ether channel say en15 and en16 are physical and en17 is ether channel. I have created 2 clients on this server, now the question is can I map this en17 to both... (1 Reply)
Discussion started by: vjm
1 Replies

5. Solaris

ATM to Ethernet conversion

More old kit ..... We have a bunch of old Sun kit E4500, E450 etc that are currently running on ATM nic's and need to be put on the the onboard Ethernet ports.... Anyone know how to do this without downtime? It'd be better if I can keep the original Ip Addresses though it may be possible to... (2 Replies)
Discussion started by: Martincorneuk
2 Replies

6. Shell Programming and Scripting

Send ctrl-C signal using bash script.

declare -a array=( "LLC-load-misses" "LLC-loads" "LLC-store-misses" "LLC-stores" "branch-load-misses" "branch-loads" "dTLB-load-misses" "dTLB-loads" "dTLB-store-misses" "dTLB-stores" "iTLB-load-misses" "iTLB-loads" "branch-instructions" "branch-misses" "bus-cycles" "cache-misses" "cache-references"... (2 Replies)
Discussion started by: BHASKAR JUPUDI
2 Replies

Featured Tech Videos