PERLDIAG(1) Perl Programmers Reference Guide PERLDIAG(1)
NAME
perldiag - various Perl diagnostics
DESCRIPTION
These messages are classified as follows (listed in increasing order of desperation):
(W) A warning (optional).
(D) A deprecation (enabled by default).
(S) A severe warning (enabled by default).
(F) A fatal error (trappable).
(P) An internal error you should never see (trappable).
(X) A very fatal error (nontrappable).
(A) An alien error message (not generated by Perl).
The majority of messages from the first three classifications above (W, D & S) can be controlled using the "warnings" pragma.
If a message can be controlled by the "warnings" pragma, its warning category is included with the classification letter in the description
below.
Optional warnings are enabled by using the "warnings" pragma or the -w and -W switches. Warnings may be captured by setting $SIG{__WARN__}
to a reference to a routine that will be called on each warning instead of printing it. See perlvar.
Severe warnings are always enabled, unless they are explicitly disabled with the "warnings" pragma or the -X switch.
Trappable errors may be trapped using the eval operator. See "eval" in perlfunc. In almost all cases, warnings may be selectively
disabled or promoted to fatal errors using the "warnings" pragma. See warnings.
The messages are in alphabetical order, without regard to upper or lower-case. Some of these messages are generic. Spots that vary are
denoted with a %s or other printf-style escape. These escapes are ignored by the alphabetical order, as are all characters other than
letters. To look up your message, just ignore anything that is not a letter.
accept() on closed socket %s
(W closed) You tried to do an accept on a closed socket. Did you forget to check the return value of your socket() call? See "accept"
in perlfunc.
Allocation too large: %x
(X) You can't allocate more than 64K on an MS-DOS machine.
'%c' allowed only after types %s
(F) The modifiers '!', '<' and '>' are allowed in pack() or unpack() only after certain types. See "pack" in perlfunc.
Ambiguous call resolved as CORE::%s(), qualify as such or use &
(W ambiguous) A subroutine you have declared has the same name as a Perl keyword, and you have used the name without qualification for
calling one or the other. Perl decided to call the builtin because the subroutine is not imported.
To force interpretation as a subroutine call, either put an ampersand before the subroutine name, or qualify the name with its package.
Alternatively, you can import the subroutine (or pretend that it's imported with the "use subs" pragma).
To silently interpret it as the Perl operator, use the "CORE::" prefix on the operator (e.g. "CORE::log($x)") or declare the subroutine
to be an object method (see "Subroutine Attributes" in perlsub or attributes).
Ambiguous range in transliteration operator
(F) You wrote something like "tr/a-z-0//" which doesn't mean anything at all. To include a "-" character in a transliteration, put it
either first or last. (In the past, "tr/a-z-0//" was synonymous with "tr/a-y//", which was probably not what you would have expected.)
Ambiguous use of %s resolved as %s
(W ambiguous)(S) You said something that may not be interpreted the way you thought. Normally it's pretty easy to disambiguate it by
supplying a missing quote, operator, parenthesis pair or declaration.
Ambiguous use of %c resolved as operator %c
(W ambiguous) "%", "&", and "*" are both infix operators (modulus, bitwise and, and multiplication) and initial special characters
(denoting hashes, subroutines and typeglobs), and you said something like "*foo * foo" that might be interpreted as either of them. We
assumed you meant the infix operator, but please try to make it more clear -- in the example given, you might write "*foo * foo()" if
you really meant to multiply a glob by the result of calling a function.
Ambiguous use of %c{%s} resolved to %c%s
(W ambiguous) You wrote something like "@{foo}", which might be asking for the variable @foo, or it might be calling a function named
foo, and dereferencing it as an array reference. If you wanted the variable, you can just write @foo. If you wanted to call the
function, write "@{foo()}" ... or you could just not have a variable and a function with the same name, and save yourself a lot of
trouble.
Ambiguous use of %c{%s[...]} resolved to %c%s[...]
Ambiguous use of %c{%s{...}} resolved to %c%s{...}
(W ambiguous) You wrote something like "${foo[2]}" (where foo represents the name of a Perl keyword), which might be looking for
element number 2 of the array named @foo, in which case please write $foo[2], or you might have meant to pass an anonymous arrayref to
the function named foo, and then do a scalar deref on the value it returns. If you meant that, write "${foo([2])}".
In regular expressions, the "${foo[2]}" syntax is sometimes necessary to disambiguate between array subscripts and character classes.
"/$length[2345]/", for instance, will be interpreted as $length followed by the character class "[2345]". If an array subscript is
what you want, you can avoid the warning by changing "/${length[2345]}/" to the unsightly "/${$length[2345]}/", by renaming your array
to something that does not coincide with a built-in keyword, or by simply turning off warnings with "no warnings 'ambiguous';".
Ambiguous use of -%s resolved as -&%s()
(W ambiguous) You wrote something like "-foo", which might be the string "-foo", or a call to the function "foo", negated. If you
meant the string, just write "-foo". If you meant the function call, write "-foo()".
Ambiguous use of 's//le...' resolved as 's// le...'; Rewrite as 's//el' if you meant 'use locale rules and evaluate rhs as an expression'.
In Perl 5.18, it will be resolved the other way
(W deprecated, ambiguous) You wrote a pattern match with substitution immediately followed by "le". In Perl 5.16 and earlier, this is
resolved as meaning to take the result of the substitution, and see if it is stringwise less-than-or-equal-to what follows in the
expression. Having the "le" immediately following a pattern is deprecated behavior, so in Perl 5.18, this expression will be resolved
as meaning to do the pattern match using the rules of the current locale, and evaluate the rhs as an expression when doing the
substitution. In 5.14, and 5.16 if you want the latter interpretation, you can simply write "el" instead. But note that the "/l"
modifier should not be used explicitly anyway; you should use "use locale" instead. See perllocale.
'|' and '<' may not both be specified on command line
(F) An error peculiar to VMS. Perl does its own command line redirection, and found that STDIN was a pipe, and that you also tried to
redirect STDIN using '<'. Only one STDIN stream to a customer, please.
'|' and '>' may not both be specified on command line
(F) An error peculiar to VMS. Perl does its own command line redirection, and thinks you tried to redirect stdout both to a file and
into a pipe to another command. You need to choose one or the other, though nothing's stopping you from piping into a program or Perl
script which 'splits' output into two streams, such as
open(OUT,">$ARGV[0]") or die "Can't write to $ARGV[0]: $!";
while (<STDIN>) {
print;
print OUT;
}
close OUT;
Applying %s to %s will act on scalar(%s)
(W misc) The pattern match ("//"), substitution ("s///"), and transliteration ("tr///") operators work on scalar values. If you apply
one of them to an array or a hash, it will convert the array or hash to a scalar value (the length of an array, or the population info
of a hash) and then work on that scalar value. This is probably not what you meant to do. See "grep" in perlfunc and "map" in
perlfunc for alternatives.
Arg too short for msgsnd
(F) msgsnd() requires a string at least as long as sizeof(long).
%s argument is not a HASH or ARRAY element or a subroutine
(F) The argument to exists() must be a hash or array element or a subroutine with an ampersand, such as:
$foo{$bar}
$ref->{"susie"}[12]
&do_something
%s argument is not a HASH or ARRAY element or slice
(F) The argument to delete() must be either a hash or array element, such as:
$foo{$bar}
$ref->{"susie"}[12]
or a hash or array slice, such as:
@foo[$bar, $baz, $xyzzy]
@{$ref->[12]}{"susie", "queue"}
%s argument is not a subroutine name
(F) The argument to exists() for "exists &sub" must be a subroutine name, and not a subroutine call. "exists &sub()" will generate
this error.
Argument "%s" isn't numeric%s
(W numeric) The indicated string was fed as an argument to an operator that expected a numeric value instead. If you're fortunate the
message will identify which operator was so unfortunate.
Argument list not closed for PerlIO layer "%s"
(W layer) When pushing a layer with arguments onto the Perl I/O system you forgot the ) that closes the argument list. (Layers take
care of transforming data between external and internal representations.) Perl stopped parsing the layer list at this point and did
not attempt to push this layer. If your program didn't explicitly request the failing operation, it may be the result of the value of
the environment variable PERLIO.
Array @%s missing the @ in argument %d of %s()
(D deprecated) Really old Perl let you omit the @ on array names in some spots. This is now heavily deprecated.
assertion botched: %s
(X) The malloc package that comes with Perl had an internal failure.
Assertion failed: file "%s"
(X) A general assertion failed. The file in question must be examined.
Assigning non-zero to $[ is no longer possible
(F) When the "array_base" feature is disabled (e.g., under "use v5.16;") the special variable $[, which is deprecated, is now a fixed
zero value.
Assignment to both a list and a scalar
(F) If you assign to a conditional operator, the 2nd and 3rd arguments must either both be scalars or both be lists. Otherwise Perl
won't know which context to supply to the right side.
A thread exited while %d threads were running
(W threads)(S) When using threaded Perl, a thread (not necessarily the main thread) exited while there were still other threads
running. Usually it's a good idea first to collect the return values of the created threads by joining them, and only then to exit
from the main thread. See threads.
Attempt to access disallowed key '%s' in a restricted hash
(F) The failing code has attempted to get or set a key which is not in the current set of allowed keys of a restricted hash.
Attempt to bless into a reference
(F) The CLASSNAME argument to the bless() operator is expected to be the name of the package to bless the resulting object into.
You've supplied instead a reference to something: perhaps you wrote
bless $self, $proto;
when you intended
bless $self, ref($proto) || $proto;
If you actually want to bless into the stringified version of the reference supplied, you need to stringify it yourself, for example
by:
bless $self, "$proto";
Attempt to clear deleted array
(S debugging) An array was assigned to when it was being freed. Freed values are not supposed to be visible to Perl code. This can
also happen if XS code calls "av_clear" from a custom magic callback on the array.
Attempt to delete disallowed key '%s' from a restricted hash
(F) The failing code attempted to delete from a restricted hash a key which is not in its key set.
Attempt to delete readonly key '%s' from a restricted hash
(F) The failing code attempted to delete a key whose value has been declared readonly from a restricted hash.
Attempt to free non-arena SV: 0x%x
(S internal) All SV objects are supposed to be allocated from arenas that will be garbage collected on exit. An SV was discovered to
be outside any of those arenas.
Attempt to free nonexistent shared string '%s'%s
(S internal) Perl maintains a reference-counted internal table of strings to optimize the storage and access of hash keys and other
strings. This indicates someone tried to decrement the reference count of a string that can no longer be found in the table.
Attempt to free temp prematurely: SV 0x%x
(S debugging) Mortalized values are supposed to be freed by the free_tmps() routine. This indicates that something else is freeing the
SV before the free_tmps() routine gets a chance, which means that the free_tmps() routine will be freeing an unreferenced scalar when
it does try to free it.
Attempt to free unreferenced glob pointers
(S internal) The reference counts got screwed up on symbol aliases.
Attempt to free unreferenced scalar: SV 0x%x
(W internal) Perl went to decrement the reference count of a scalar to see if it would go to 0, and discovered that it had already gone
to 0 earlier, and should have been freed, and in fact, probably was freed. This could indicate that SvREFCNT_dec() was called too many
times, or that SvREFCNT_inc() was called too few times, or that the SV was mortalized when it shouldn't have been, or that memory has
been corrupted.
Attempt to join self
(F) You tried to join a thread from within itself, which is an impossible task. You may be joining the wrong thread, or you may need
to move the join() to some other thread.
Attempt to pack pointer to temporary value
(W pack) You tried to pass a temporary value (like the result of a function, or a computed expression) to the "p" pack() template.
This means the result contains a pointer to a location that could become invalid anytime, even before the end of the current statement.
Use literals or global values as arguments to the "p" pack() template to avoid this warning.
Attempt to reload %s aborted.
(F) You tried to load a file with "use" or "require" that failed to compile once already. Perl will not try to compile this file again
unless you delete its entry from %INC. See "require" in perlfunc and "%INC" in perlvar.
Attempt to set length of freed array
(W) You tried to set the length of an array which has been freed. You can do this by storing a reference to the scalar representing
the last index of an array and later assigning through that reference. For example
$r = do {my @a; $#a};
$$r = 503
Attempt to use reference as lvalue in substr
(W substr) You supplied a reference as the first argument to substr() used as an lvalue, which is pretty strange. Perhaps you forgot
to dereference it first. See "substr" in perlfunc.
Attribute "locked" is deprecated
(D deprecated) You have used the attributes pragma to modify the "locked" attribute on a code reference. The :locked attribute is
obsolete, has had no effect since 5005 threads were removed, and will be removed in a future release of Perl 5.
Attribute "unique" is deprecated
(D deprecated) You have used the attributes pragma to modify the "unique" attribute on an array, hash or scalar reference. The :unique
attribute has had no effect since Perl 5.8.8, and will be removed in a future release of Perl 5.
av_reify called on tied array
(S debugging) This indicates that something went wrong and Perl got very confused about @_ or @DB::args being tied.
Bad arg length for %s, is %u, should be %d
(F) You passed a buffer of the wrong size to one of msgctl(), semctl() or shmctl(). In C parlance, the correct sizes are,
respectively, sizeof(struct msqid_ds *), sizeof(struct semid_ds *), and sizeof(struct shmid_ds *).
Bad evalled substitution pattern
(F) You've used the "/e" switch to evaluate the replacement for a substitution, but perl found a syntax error in the code to evaluate,
most likely an unexpected right brace '}'.
Bad filehandle: %s
(F) A symbol was passed to something wanting a filehandle, but the symbol has no filehandle associated with it. Perhaps you didn't do
an open(), or did it in another package.
Bad free() ignored
(S malloc) An internal routine called free() on something that had never been malloc()ed in the first place. Mandatory, but can be
disabled by setting environment variable "PERL_BADFREE" to 0.
This message can be seen quite often with DB_File on systems with "hard" dynamic linking, like "AIX" and "OS/2". It is a bug of
"Berkeley DB" which is left unnoticed if "DB" uses forgiving system malloc().
Bad hash
(P) One of the internal hash routines was passed a null HV pointer.
Badly placed ()'s
(A) You've accidentally run your script through csh instead of Perl. Check the #! line, or manually feed your script into Perl
yourself.
Bad name after %s
(F) You started to name a symbol by using a package prefix, and then didn't finish the symbol. In particular, you can't interpolate
outside of quotes, so
$var = 'myvar';
$sym = mypack::$var;
is not the same as
$var = 'myvar';
$sym = "mypack::$var";
Bad plugin affecting keyword '%s'
(F) An extension using the keyword plugin mechanism violated the plugin API.
Bad realloc() ignored
(S malloc) An internal routine called realloc() on something that had never been malloc()ed in the first place. Mandatory, but can be
disabled by setting the environment variable "PERL_BADFREE" to 1.
Bad symbol for array
(P) An internal request asked to add an array entry to something that wasn't a symbol table entry.
Bad symbol for dirhandle
(P) An internal request asked to add a dirhandle entry to something that wasn't a symbol table entry.
Bad symbol for filehandle
(P) An internal request asked to add a filehandle entry to something that wasn't a symbol table entry.
Bad symbol for hash
(P) An internal request asked to add a hash entry to something that wasn't a symbol table entry.
Bareword found in conditional
(W bareword) The compiler found a bareword where it expected a conditional, which often indicates that an || or && was parsed as part
of the last argument of the previous construct, for example:
open FOO || die;
It may also indicate a misspelled constant that has been interpreted as a bareword:
use constant TYPO => 1;
if (TYOP) { print "foo" }
The "strict" pragma is useful in avoiding such errors.
Bareword "%s" not allowed while "strict subs" in use
(F) With "strict subs" in use, a bareword is only allowed as a subroutine identifier, in curly brackets or to the left of the "=>"
symbol. Perhaps you need to predeclare a subroutine?
Bareword "%s" refers to nonexistent package
(W bareword) You used a qualified bareword of the form "Foo::", but the compiler saw no other uses of that namespace before that point.
Perhaps you need to predeclare a package?
BEGIN failed--compilation aborted
(F) An untrapped exception was raised while executing a BEGIN subroutine. Compilation stops immediately and the interpreter is exited.
BEGIN not safe after errors--compilation aborted
(F) Perl found a "BEGIN {}" subroutine (or a "use" directive, which implies a "BEGIN {}") after one or more compilation errors had
already occurred. Since the intended environment for the "BEGIN {}" could not be guaranteed (due to the errors), and since subsequent
code likely depends on its correct operation, Perl just gave up.
1 better written as $1
(W syntax) Outside of patterns, backreferences live on as variables. The use of backslashes is grandfathered on the right-hand side of
a substitution, but stylistically it's better to use the variable form because other Perl programmers will expect it, and it works
better if there are more than 9 backreferences.
Binary number > 0b11111111111111111111111111111111 non-portable
(W portable) The binary number you specified is larger than 2**32-1(4294967295) and therefore non-portable between systems. See
perlport for more on portability concerns.
bind() on closed socket %s
(W closed) You tried to do a bind on a closed socket. Did you forget to check the return value of your socket() call? See "bind" in
perlfunc.
binmode() on closed filehandle %s
(W unopened) You tried binmode() on a filehandle that was never opened. Check your control flow and number of arguments.
"{" is deprecated; use "{" instead
"B{" is deprecated; use "B{" instead
(W deprecated, regexp) Use of an unescaped "{" immediately following a "" or "B" is now deprecated so as to reserve its use for Perl
itself in a future release.
Bit vector size > 32 non-portable
(W portable) Using bit vector sizes larger than 32 is non-portable.
Bizarre copy of %s
(P) Perl detected an attempt to copy an internal value that is not copiable.
Buffer overflow in prime_env_iter: %s
(W internal) A warning peculiar to VMS. While Perl was preparing to iterate over %ENV, it encountered a logical name or symbol
definition which was too long, so it was truncated to the string shown.
Bizarre SvTYPE [%d]
(P) When starting a new thread or return values from a thread, Perl encountered an invalid data type.
Callback called exit
(F) A subroutine invoked from an external package via call_sv() exited by calling exit.
%s() called too early to check prototype
(W prototype) You've called a function that has a prototype before the parser saw a definition or declaration for it, and Perl could
not check that the call conforms to the prototype. You need to either add an early prototype declaration for the subroutine in
question, or move the subroutine definition ahead of the call to get proper prototype checking. Alternatively, if you are certain that
you're calling the function correctly, you may put an ampersand before the name to avoid the warning. See perlsub.
Cannot compress integer in pack
(F) An argument to pack("w",...) was too large to compress. The BER compressed integer format can only be used with positive integers,
and you attempted to compress Infinity or a very large number (> 1e308). See "pack" in perlfunc.
Cannot compress negative numbers in pack
(F) An argument to pack("w",...) was negative. The BER compressed integer format can only be used with positive integers. See "pack"
in perlfunc.
Cannot convert a reference to %s to typeglob
(F) You manipulated Perl's symbol table directly, stored a reference in it, then tried to access that symbol via conventional Perl
syntax. The access triggers Perl to autovivify that typeglob, but it there is no legal conversion from that type of reference to a
typeglob.
Cannot copy to %s
(P) Perl detected an attempt to copy a value to an internal type that cannot be directly assigned to.
Cannot find encoding "%s"
(S io) You tried to apply an encoding that did not exist to a filehandle, either with open() or binmode().
Cannot set tied @DB::args
(F) "caller" tried to set @DB::args, but found it tied. Tying @DB::args is not supported. (Before this error was added, it used to
crash.)
Cannot tie unreifiable array
(P) You somehow managed to call "tie" on an array that does not keep a reference count on its arguments and cannot be made to do so.
Such arrays are not even supposed to be accessible to Perl code, but are only used internally.
Can only compress unsigned integers in pack
(F) An argument to pack("w",...) was not an integer. The BER compressed integer format can only be used with positive integers, and
you attempted to compress something else. See "pack" in perlfunc.
Can't bless non-reference value
(F) Only hard references may be blessed. This is how Perl "enforces" encapsulation of objects. See perlobj.
Can't "break" in a loop topicalizer
(F) You called "break", but you're in a "foreach" block rather than a "given" block. You probably meant to use "next" or "last".
Can't "break" outside a given block
(F) You called "break", but you're not inside a "given" block.
Can't call method "%s" on an undefined value
(F) You used the syntax of a method call, but the slot filled by the object reference or package name contains an undefined value.
Something like this will reproduce the error:
$BADREF = undef;
process $BADREF 1,2,3;
$BADREF->process(1,2,3);
Can't call method "%s" on unblessed reference
(F) A method call must know in what package it's supposed to run. It ordinarily finds this out from the object reference you supply,
but you didn't supply an object reference in this case. A reference isn't an object reference until it has been blessed. See perlobj.
Can't call method "%s" without a package or object reference
(F) You used the syntax of a method call, but the slot filled by the object reference or package name contains an expression that
returns a defined value which is neither an object reference nor a package name. Something like this will reproduce the error:
$BADREF = 42;
process $BADREF 1,2,3;
$BADREF->process(1,2,3);
Can't chdir to %s
(F) You called "perl -x/foo/bar", but "/foo/bar" is not a directory that you can chdir to, possibly because it doesn't exist.
Can't check filesystem of script "%s" for nosuid
(P) For some reason you can't check the filesystem of the script for nosuid.
Can't coerce %s to %s in %s
(F) Certain types of SVs, in particular real symbol table entries (typeglobs), can't be forced to stop being what they are. So you
can't say things like:
*foo += 1;
You CAN say
$foo = *foo;
$foo += 1;
but then $foo no longer contains a glob.
Can't "continue" outside a when block
(F) You called "continue", but you're not inside a "when" or "default" block.
Can't create pipe mailbox
(P) An error peculiar to VMS. The process is suffering from exhausted quotas or other plumbing problems.
Can't declare %s in "%s"
(F) Only scalar, array, and hash variables may be declared as "my", "our" or "state" variables. They must have ordinary identifiers as
names.
Can't "default" outside a topicalizer
(F) You have used a "default" block that is neither inside a "foreach" loop nor a "given" block. (Note that this error is issued on
exit from the "default" block, so you won't get the error if you use an explicit "continue".)
Can't do inplace edit: %s is not a regular file
(S inplace) You tried to use the -i switch on a special file, such as a file in /dev, or a FIFO. The file was ignored.
Can't do inplace edit on %s: %s
(S inplace) The creation of the new file failed for the indicated reason.
Can't do inplace edit without backup
(F) You're on a system such as MS-DOS that gets confused if you try reading from a deleted (but still opened) file. You have to say
"-i.bak", or some such.
Can't do inplace edit: %s would not be unique
(S inplace) Your filesystem does not support filenames longer than 14 characters and Perl was unable to create a unique filename during
inplace editing with the -i switch. The file was ignored.
Can't do {n,m} with n > m in regex; marked by <-- HERE in m/%s/
(F) Minima must be less than or equal to maxima. If you really want your regexp to match something 0 times, just put {0}. The <--
HERE shows in the regular expression about where the problem was discovered. See perlre.
Can't do waitpid with flags
(F) This machine doesn't have either waitpid() or wait4(), so only waitpid() without flags is emulated.
Can't emulate -%s on #! line
(F) The #! line specifies a switch that doesn't make sense at this point. For example, it'd be kind of silly to put a -x on the #!
line.
Can't %s %s-endian %ss on this platform
(F) Your platform's byte-order is neither big-endian nor little-endian, or it has a very strange pointer size. Packing and unpacking
big- or little-endian floating point values and pointers may not be possible. See "pack" in perlfunc.
Can't exec "%s": %s
(W exec) A system(), exec(), or piped open call could not execute the named program for the indicated reason. Typical reasons include:
the permissions were wrong on the file, the file wasn't found in $ENV{PATH}, the executable in question was compiled for another
architecture, or the #! line in a script points to an interpreter that can't be run for similar reasons. (Or maybe your system doesn't
support #! at all.)
Can't exec %s
(F) Perl was trying to execute the indicated program for you because that's what the #! line said. If that's not what you wanted, you
may need to mention "perl" on the #! line somewhere.
Can't execute %s
(F) You used the -S switch, but the copies of the script to execute found in the PATH did not have correct permissions.
Can't find an opnumber for "%s"
(F) A string of a form "CORE::word" was given to prototype(), but there is no builtin with the name "word".
Can't find %s character property "%s"
(F) You used "p{}" or "P{}" but the character property by that name could not be found. Maybe you misspelled the name of the
property? See "Properties accessible through p{} and P{}" in perluniprops for a complete list of available properties.
Can't find label %s
(F) You said to goto a label that isn't mentioned anywhere that it's possible for us to go to. See "goto" in perlfunc.
Can't find %s on PATH
(F) You used the -S switch, but the script to execute could not be found in the PATH.
Can't find %s on PATH, '.' not in PATH
(F) You used the -S switch, but the script to execute could not be found in the PATH, or at least not with the correct permissions.
The script exists in the current directory, but PATH prohibits running it.
Can't find string terminator %s anywhere before EOF
(F) Perl strings can stretch over multiple lines. This message means that the closing delimiter was omitted. Because bracketed quotes
count nesting levels, the following is missing its final parenthesis:
print q(The character '(' starts a side comment.);
If you're getting this error from a here-document, you may have included unseen whitespace before or after your closing tag or there
may not be a linebreak after it. A good programmer's editor will have a way to help you find these characters (or lack of characters).
See perlop for the full details on here-documents.
Can't find Unicode property definition "%s"
(F) You may have tried to use "p" which means a Unicode property (for example "p{Lu}" matches all uppercase letters). If you did
mean to use a Unicode property, see "Properties accessible through p{} and P{}" in perluniprops for a complete list of available
properties. If you didn't mean to use a Unicode property, escape the "p", either by "\p" (just the "p") or by "Qp" (the rest of
the string, or until "E").
Can't fork: %s
(F) A fatal error occurred while trying to fork while opening a pipeline.
Can't fork, trying again in 5 seconds
(W pipe) A fork in a piped open failed with EAGAIN and will be retried after five seconds.
Can't get filespec - stale stat buffer?
(S) A warning peculiar to VMS. This arises because of the difference between access checks under VMS and under the Unix model Perl
assumes. Under VMS, access checks are done by filename, rather than by bits in the stat buffer, so that ACLs and other protections can
be taken into account. Unfortunately, Perl assumes that the stat buffer contains all the necessary information, and passes it, instead
of the filespec, to the access-checking routine. It will try to retrieve the filespec using the device name and FID present in the
stat buffer, but this works only if you haven't made a subsequent call to the CRTL stat() routine, because the device name is
overwritten with each call. If this warning appears, the name lookup failed, and the access-checking routine gave up and returned
FALSE, just to be conservative. (Note: The access-checking routine knows about the Perl "stat" operator and file tests, so you
shouldn't ever see this warning in response to a Perl command; it arises only if some internal code takes stat buffers lightly.)
Can't get pipe mailbox device name
(P) An error peculiar to VMS. After creating a mailbox to act as a pipe, Perl can't retrieve its name for later use.
Can't get SYSGEN parameter value for MAXBUF
(P) An error peculiar to VMS. Perl asked $GETSYI how big you want your mailbox buffers to be, and didn't get an answer.
Can't "goto" into the middle of a foreach loop
(F) A "goto" statement was executed to jump into the middle of a foreach loop. You can't get there from here. See "goto" in perlfunc.
Can't "goto" out of a pseudo block
(F) A "goto" statement was executed to jump out of what might look like a block, except that it isn't a proper block. This usually
occurs if you tried to jump out of a sort() block or subroutine, which is a no-no. See "goto" in perlfunc.
Can't goto subroutine from a sort sub (or similar callback)
(F) The "goto subroutine" call can't be used to jump out of the comparison sub for a sort(), or from a similar callback (such as the
reduce() function in List::Util).
Can't goto subroutine from an eval-%s
(F) The "goto subroutine" call can't be used to jump out of an eval "string" or block.
Can't goto subroutine outside a subroutine
(F) The deeply magical "goto subroutine" call can only replace one subroutine call for another. It can't manufacture one out of whole
cloth. In general you should be calling it out of only an AUTOLOAD routine anyway. See "goto" in perlfunc.
Can't ignore signal CHLD, forcing to default
(W signal) Perl has detected that it is being run with the SIGCHLD signal (sometimes known as SIGCLD) disabled. Since disabling this
signal will interfere with proper determination of exit status of child processes, Perl has reset the signal to its default value.
This situation typically indicates that the parent program under which Perl may be running (e.g. cron) is being very careless.
Can't kill a non-numeric process ID
(F) Process identifiers must be (signed) integers. It is a fatal error to attempt to kill() an undefined, empty-string or otherwise
non-numeric process identifier.
Can't "last" outside a loop block
(F) A "last" statement was executed to break out of the current block, except that there's this itty bitty problem called there isn't a
current block. Note that an "if" or "else" block doesn't count as a "loopish" block, as doesn't a block given to sort(), map() or
grep(). You can usually double the curlies to get the same effect though, because the inner curlies will be considered a block that
loops once. See "last" in perlfunc.
Can't linearize anonymous symbol table
(F) Perl tried to calculate the method resolution order (MRO) of a package, but failed because the package stash has no name.
Can't load '%s' for module %s
(F) The module you tried to load failed to load a dynamic extension. This may either mean that you upgraded your version of perl to
one that is incompatible with your old dynamic extensions (which is known to happen between major versions of perl), or (more likely)
that your dynamic extension was built against an older version of the library that is installed on your system. You may need to
rebuild your old dynamic extensions.
Can't localize lexical variable %s
(F) You used local on a variable name that was previously declared as a lexical variable using "my" or "state". This is not allowed.
If you want to localize a package variable of the same name, qualify it with the package name.
Can't localize through a reference
(F) You said something like "local $$ref", which Perl can't currently handle, because when it goes to restore the old value of whatever
$ref pointed to after the scope of the local() is finished, it can't be sure that $ref will still be a reference.
Can't locate %s
(F) You said to "do" (or "require", or "use") a file that couldn't be found. Perl looks for the file in all the locations mentioned in
@INC, unless the file name included the full path to the file. Perhaps you need to set the PERL5LIB or PERL5OPT environment variable
to say where the extra library is, or maybe the script needs to add the library name to @INC. Or maybe you just misspelled the name of
the file. See "require" in perlfunc and lib.
Can't locate auto/%s.al in @INC
(F) A function (or method) was called in a package which allows autoload, but there is no function to autoload. Most probable causes
are a misprint in a function/method name or a failure to "AutoSplit" the file, say, by doing "make install".
Can't locate loadable object for module %s in @INC
(F) The module you loaded is trying to load an external library, like for example, foo.so or bar.dll, but the DynaLoader module was
unable to locate this library. See DynaLoader.
Can't locate object method "%s" via package "%s"
(F) You called a method correctly, and it correctly indicated a package functioning as a class, but that package doesn't define that
particular method, nor does any of its base classes. See perlobj.
Can't locate package %s for @%s::ISA
(W syntax) The @ISA array contained the name of another package that doesn't seem to exist.
Can't locate PerlIO%s
(F) You tried to use in open() a PerlIO layer that does not exist, e.g. open(FH, ">:nosuchlayer", "somefile").
Can't make list assignment to %ENV on this system
(F) List assignment to %ENV is not supported on some systems, notably VMS.
Can't modify %s in %s
(F) You aren't allowed to assign to the item indicated, or otherwise try to change it, such as with an auto-increment.
Can't modify nonexistent substring
(P) The internal routine that does assignment to a substr() was handed a NULL.
Can't modify non-lvalue subroutine call
(F) Subroutines meant to be used in lvalue context should be declared as such. See "Lvalue subroutines" in perlsub.
Can't msgrcv to read-only var
(F) The target of a msgrcv must be modifiable to be used as a receive buffer.
Can't "next" outside a loop block
(F) A "next" statement was executed to reiterate the current block, but there isn't a current block. Note that an "if" or "else" block
doesn't count as a "loopish" block, as doesn't a block given to sort(), map() or grep(). You can usually double the curlies to get the
same effect though, because the inner curlies will be considered a block that loops once. See "next" in perlfunc.
Can't open %s
(F) You tried to run a perl built with MAD support with the PERL_XMLDUMP environment variable set, but the file named by that variable
could not be opened.
Can't open %s: %s
(S inplace) The implicit opening of a file through use of the "<>" filehandle, either implicitly under the "-n" or "-p" command-line
switches, or explicitly, failed for the indicated reason. Usually this is because you don't have read permission for a file which you
named on the command line.
(F) You tried to call perl with the -e switch, but /dev/null (or your operating system's equivalent) could not be opened.
Can't open a reference
(W io) You tried to open a scalar reference for reading or writing, using the 3-arg open() syntax:
open FH, '>', $ref;
but your version of perl is compiled without perlio, and this form of open is not supported.
Can't open bidirectional pipe
(W pipe) You tried to say "open(CMD, "|cmd|")", which is not supported. You can try any of several modules in the Perl library to do
this, such as IPC::Open2. Alternately, direct the pipe's output to a file using ">", and then read it in under a different file
handle.
Can't open error file %s as stderr
(F) An error peculiar to VMS. Perl does its own command line redirection, and couldn't open the file specified after '2>' or '2>>' on
the command line for writing.
Can't open input file %s as stdin
(F) An error peculiar to VMS. Perl does its own command line redirection, and couldn't open the file specified after '<' on the
command line for reading.
Can't open output file %s as stdout
(F) An error peculiar to VMS. Perl does its own command line redirection, and couldn't open the file specified after '>' or '>>' on
the command line for writing.
Can't open output pipe (name: %s)
(P) An error peculiar to VMS. Perl does its own command line redirection, and couldn't open the pipe into which to send data destined
for stdout.
Can't open perl script "%s": %s
(F) The script you specified can't be opened for the indicated reason.
If you're debugging a script that uses #!, and normally relies on the shell's $PATH search, the -S option causes perl to do that
search, so you don't have to type the path or "`which $scriptname`".
Can't read CRTL environ
(S) A warning peculiar to VMS. Perl tried to read an element of %ENV from the CRTL's internal environment array and discovered the
array was missing. You need to figure out where your CRTL misplaced its environ or define PERL_ENV_TABLES (see perlvms) so that
environ is not searched.
Can't "redo" outside a loop block
(F) A "redo" statement was executed to restart the current block, but there isn't a current block. Note that an "if" or "else" block
doesn't count as a "loopish" block, as doesn't a block given to sort(), map() or grep(). You can usually double the curlies to get the
same effect though, because the inner curlies will be considered a block that loops once. See "redo" in perlfunc.
Can't remove %s: %s, skipping file
(S inplace) You requested an inplace edit without creating a backup file. Perl was unable to remove the original file to replace it
with the modified file. The file was left unmodified.
Can't rename %s to %s: %s, skipping file
(S inplace) The rename done by the -i switch failed for some reason, probably because you don't have write permission to the directory.
Can't reopen input pipe (name: %s) in binary mode
(P) An error peculiar to VMS. Perl thought stdin was a pipe, and tried to reopen it to accept binary data. Alas, it failed.
Can't reset %ENV on this system
(F) You called "reset('E')" or similar, which tried to reset all variables in the current package beginning with "E". In the main
package, that includes %ENV. Resetting %ENV is not supported on some systems, notably VMS.
Can't resolve method "%s" overloading "%s" in package "%s"
(F)(P) Error resolving overloading specified by a method name (as opposed to a subroutine reference): no such method callable via the
package. If the method name is "???", this is an internal error.
Can't return %s from lvalue subroutine
(F) Perl detected an attempt to return illegal lvalues (such as temporary or readonly values) from a subroutine used as an lvalue.
This is not allowed.
Can't return outside a subroutine
(F) The return statement was executed in mainline code, that is, where there was no subroutine call to return out of. See perlsub.
Can't return %s to lvalue scalar context
(F) You tried to return a complete array or hash from an lvalue subroutine, but you called the subroutine in a way that made Perl think
you meant to return only one value. You probably meant to write parentheses around the call to the subroutine, which tell Perl that
the call should be in list context.
Can't stat script "%s"
(P) For some reason you can't fstat() the script even though you have it open already. Bizarre.
Can't take log of %g
(F) For ordinary real numbers, you can't take the logarithm of a negative number or zero. There's a Math::Complex package that comes
standard with Perl, though, if you really want to do that for the negative numbers.
Can't take sqrt of %g
(F) For ordinary real numbers, you can't take the square root of a negative number. There's a Math::Complex package that comes
standard with Perl, though, if you really want to do that.
Can't undef active subroutine
(F) You can't undefine a routine that's currently running. You can, however, redefine it while it's running, and you can even undef
the redefined subroutine while the old routine is running. Go figure.
Can't upgrade %s (%d) to %d
(P) The internal sv_upgrade routine adds "members" to an SV, making it into a more specialized kind of SV. The top several SV types
are so specialized, however, that they cannot be interconverted. This message indicates that such a conversion was attempted.
Can't use '%c' after -mname
(F) You tried to call perl with the -m switch, but you put something other than "=" after the module name.
Can't use anonymous symbol table for method lookup
(F) The internal routine that does method lookup was handed a symbol table that doesn't have a name. Symbol tables can become
anonymous for example by undefining stashes: "undef %Some::Package::".
Can't use an undefined value as %s reference
(F) A value used as either a hard reference or a symbolic reference must be a defined value. This helps to delurk some insidious
errors.
Can't use bareword ("%s") as %s ref while "strict refs" in use
(F) Only hard references are allowed by "strict refs". Symbolic references are disallowed. See perlref.
Can't use %! because Errno.pm is not available
(F) The first time the "%!" hash is used, perl automatically loads the Errno.pm module. The Errno module is expected to tie the %!
hash to provide symbolic names for $! errno values.
Can't use both '<' and '>' after type '%c' in %s
(F) A type cannot be forced to have both big-endian and little-endian byte-order at the same time, so this combination of modifiers is
not allowed. See "pack" in perlfunc.
Can't use %s for loop variable
(F) Only a simple scalar variable may be used as a loop variable on a foreach.
Can't use global %s in "%s"
(F) You tried to declare a magical variable as a lexical variable. This is not allowed, because the magic can be tied to only one
location (namely the global variable) and it would be incredibly confusing to have variables in your program that looked like magical
variables but weren't.
Can't use '%c' in a group with different byte-order in %s
(F) You attempted to force a different byte-order on a type that is already inside a group with a byte-order modifier. For example you
cannot force little-endianness on a type that is inside a big-endian group.
Can't use "my %s" in sort comparison
(F) The global variables $a and $b are reserved for sort comparisons. You mentioned $a or $b in the same line as the <=> or cmp
operator, and the variable had earlier been declared as a lexical variable. Either qualify the sort variable with the package name, or
rename the lexical variable.
Can't use %s ref as %s ref
(F) You've mixed up your reference types. You have to dereference a reference of the type needed. You can use the ref() function to
test the type of the reference, if need be.
Can't use string ("%s") as %s ref while "strict refs" in use
(F) Only hard references are allowed by "strict refs". Symbolic references are disallowed. See perlref.
Can't use subscript on %s
(F) The compiler tried to interpret a bracketed expression as a subscript. But to the left of the brackets was an expression that
didn't look like a hash or array reference, or anything else subscriptable.
Can't use \%c to mean $%c in expression
(W syntax) In an ordinary expression, backslash is a unary operator that creates a reference to its argument. The use of backslash to
indicate a backreference to a matched substring is valid only as part of a regular expression pattern. Trying to do this in ordinary
Perl code produces a value that prints out looking like SCALAR(0xdecaf). Use the $1 form instead.
Can't weaken a nonreference
(F) You attempted to weaken something that was not a reference. Only references can be weakened.
Can't "when" outside a topicalizer
(F) You have used a when() block that is neither inside a "foreach" loop nor a "given" block. (Note that this error is issued on exit
from the "when" block, so you won't get the error if the match fails, or if you use an explicit "continue".)
Can't x= to read-only value
(F) You tried to repeat a constant value (often the undefined value) with an assignment operator, which implies modifying the value
itself. Perhaps you need to copy the value to a temporary, and repeat that.
Character following "c" must be ASCII
(F)(W deprecated, syntax) In "cX", X must be an ASCII character. It is planned to make this fatal in all instances in Perl 5.18. In
the cases where it isn't fatal, the character this evaluates to is derived by exclusive or'ing the code point of this character with
0x40.
Note that non-alphabetic ASCII characters are discouraged here as well.
Character in 'C' format wrapped in pack
(W pack) You said
pack("C", $x)
where $x is either less than 0 or more than 255; the "C" format is only for encoding native operating system characters (ASCII, EBCDIC,
and so on) and not for Unicode characters, so Perl behaved as if you meant
pack("C", $x & 255)
If you actually want to pack Unicode codepoints, use the "U" format instead.
Character in 'W' format wrapped in pack
(W pack) You said
pack("U0W", $x)
where $x is either less than 0 or more than 255. However, "U0"-mode expects all values to fall in the interval [0, 255], so Perl
behaved as if you meant:
pack("U0W", $x & 255)
Character in 'c' format wrapped in pack
(W pack) You said
pack("c", $x)
where $x is either less than -128 or more than 127; the "c" format is only for encoding native operating system characters (ASCII,
EBCDIC, and so on) and not for Unicode characters, so Perl behaved as if you meant
pack("c", $x & 255);
If you actually want to pack Unicode codepoints, use the "U" format instead.
Character in '%c' format wrapped in unpack
(W unpack) You tried something like
unpack("H", "x{2a1}")
where the format expects to process a byte (a character with a value below 256), but a higher value was provided instead. Perl uses
the value modulus 256 instead, as if you had provided:
unpack("H", "x{a1}")
Character(s) in '%c' format wrapped in pack
(W pack) You tried something like
pack("u", "x{1f3}b")
where the format expects to process a sequence of bytes (character with a value below 256), but some of the characters had a higher
value. Perl uses the character values modulus 256 instead, as if you had provided:
pack("u", "x{f3}b")
Character(s) in '%c' format wrapped in unpack
(W unpack) You tried something like
unpack("s", "x{1f3}b")
where the format expects to process a sequence of bytes (character with a value below 256), but some of the characters had a higher
value. Perl uses the character values modulus 256 instead, as if you had provided:
unpack("s", "x{f3}b")
"c{" is deprecated and is more clearly written as ";"
(D deprecated, syntax) The "cX" construct is intended to be a way to specify non-printable characters. You used it with a "{" which
evaluates to ";", which is printable. It is planned to remove the ability to specify a semi-colon this way in Perl 5.18. Just use a
semi-colon or a backslash-semi-colon without the "c".
"c%c" is more clearly written simply as "%s"
(W syntax) The "cX" construct is intended to be a way to specify non-printable characters. You used it for a printable one, which is
better written as simply itself, perhaps preceded by a backslash for non-word characters.
Cloning substitution context is unimplemented
(F) Creating a new thread inside the "s///" operator is not supported.
close() on unopened filehandle %s
(W unopened) You tried to close a filehandle that was never opened.
closedir() attempted on invalid dirhandle %s
(W io) The dirhandle you tried to close is either closed or not really a dirhandle. Check your control flow.
Closure prototype called
(F) If a closure has attributes, the subroutine passed to an attribute handler is the prototype that is cloned when a new closure is
created. This subroutine cannot be called.
Code missing after '/'
(F) You had a (sub-)template that ends with a '/'. There must be another template code following the slash. See "pack" in perlfunc.
Code point 0x%X is not Unicode, may not be portable
Code point 0x%X is not Unicode, all p{} matches fail; all P{} matches succeed
(W utf8, non_unicode) You had a code point above the Unicode maximum of U+10FFFF.
Perl allows strings to contain a superset of Unicode code points, up to the limit of what is storable in an unsigned integer on your
system, but these may not be accepted by other languages/systems. At one time, it was legal in some standards to have code points up
to 0x7FFF_FFFF, but not higher. Code points above 0xFFFF_FFFF require larger than a 32 bit word.
None of the Unicode or Perl-defined properties will match a non-Unicode code point. For example,
chr(0x7FF_FFFF) =~ /p{Any}/
will not match, because the code point is not in Unicode. But
chr(0x7FF_FFFF) =~ /P{Any}/
will match.
This may be counterintuitive at times, as both these fail:
chr(0x110000) =~ p{ASCII_Hex_Digit=True} # Fails.
chr(0x110000) =~ p{ASCII_Hex_Digit=False} # Also fails!
and both these succeed:
chr(0x110000) =~ P{ASCII_Hex_Digit=True} # Succeeds.
chr(0x110000) =~ P{ASCII_Hex_Digit=False} # Also succeeds!
%s: Command not found
(A) You've accidentally run your script through csh or another shell shell instead of Perl. Check the #! line, or manually feed your
script into Perl yourself. The #! line at the top of your file could look like
#!/usr/bin/perl -w
Compilation failed in require
(F) Perl could not compile a file specified in a "require" statement. Perl uses this generic message when none of the errors that it
encountered were severe enough to halt compilation immediately.
Complex regular subexpression recursion limit (%d) exceeded
(W regexp) The regular expression engine uses recursion in complex situations where back-tracking is required. Recursion depth is
limited to 32766, or perhaps less in architectures where the stack cannot grow arbitrarily. ("Simple" and "medium" situations are
handled without recursion and are not subject to a limit.) Try shortening the string under examination; looping in Perl code (e.g.
with "while") rather than in the regular expression engine; or rewriting the regular expression so that it is simpler or backtracks
less. (See perlfaq2 for information on Mastering Regular Expressions.)
cond_broadcast() called on unlocked variable
(W threads) Within a thread-enabled program, you tried to call cond_broadcast() on a variable which wasn't locked. The
cond_broadcast() function is used to wake up another thread that is waiting in a cond_wait(). To ensure that the signal isn't sent
before the other thread has a chance to enter the wait, it is usual for the signaling thread first to wait for a lock on variable.
This lock attempt will only succeed after the other thread has entered cond_wait() and thus relinquished the lock.
cond_signal() called on unlocked variable
(W threads) Within a thread-enabled program, you tried to call cond_signal() on a variable which wasn't locked. The cond_signal()
function is used to wake up another thread that is waiting in a cond_wait(). To ensure that the signal isn't sent before the other
thread has a chance to enter the wait, it is usual for the signaling thread first to wait for a lock on variable. This lock attempt
will only succeed after the other thread has entered cond_wait() and thus relinquished the lock.
connect() on closed socket %s
(W closed) You tried to do a connect on a closed socket. Did you forget to check the return value of your socket() call? See
"connect" in perlfunc.
Constant(%s)%s: %s
(F) The parser found inconsistencies either while attempting to define an overloaded constant, or when trying to find the character
name specified in the "N{...}" escape. Perhaps you forgot to load the corresponding overload pragma?.
Constant(%s)%s: %s in regex; marked by <-- HERE in m/%s/
(F) The parser found inconsistencies while attempting to find the character name specified in the "N{...}" escape.
Constant is not %s reference
(F) A constant value (perhaps declared using the "use constant" pragma) is being dereferenced, but it amounts to the wrong type of
reference. The message indicates the type of reference that was expected. This usually indicates a syntax error in dereferencing the
constant value. See "Constant Functions" in perlsub and constant.
Constant subroutine %s redefined
(W redefine)(S) You redefined a subroutine which had previously been eligible for inlining. See "Constant Functions" in perlsub for
commentary and workarounds.
Constant subroutine %s undefined
(W misc) You undefined a subroutine which had previously been eligible for inlining. See "Constant Functions" in perlsub for
commentary and workarounds.
Copy method did not return a reference
(F) The method which overloads "=" is buggy. See "Copy Constructor" in overload.
&CORE::%s cannot be called directly
(F) You tried to call a subroutine in the "CORE::" namespace with &foo syntax or through a reference. Some subroutines in this package
cannot yet be called that way, but must be called as barewords. Something like this will work:
BEGIN { *shove = &CORE::push; }
shove @array, 1,2,3; # pushes on to @array
CORE::%s is not a keyword
(F) The CORE:: namespace is reserved for Perl keywords.
corrupted regexp pointers
(P) The regular expression engine got confused by what the regular expression compiler gave it.
corrupted regexp program
(P) The regular expression engine got passed a regexp program without a valid magic number.
Corrupt malloc ptr 0x%x at 0x%x
(P) The malloc package that comes with Perl had an internal failure.
Count after length/code in unpack
(F) You had an unpack template indicating a counted-length string, but you have also specified an explicit size for the string. See
"pack" in perlfunc.
Deep recursion on anonymous subroutine
Deep recursion on subroutine "%s"
(W recursion) This subroutine has called itself (directly or indirectly) 100 times more than it has returned. This probably indicates
an infinite recursion, unless you're writing strange benchmark programs, in which case it indicates something else.
This threshold can be changed from 100, by recompiling the perl binary, setting the C pre-processor macro "PERL_SUB_DEPTH_WARN" to the
desired value.
defined(@array) is deprecated
(D deprecated) defined() is not usually useful on arrays because it checks for an undefined scalar value. If you want to see if the
array is empty, just use "if (@array) { # not empty }" for example.
defined(%hash) is deprecated
(D deprecated) "defined()" is not usually right on hashes and has been discouraged since 5.004.
Although "defined %hash" is false on a plain not-yet-used hash, it becomes true in several non-obvious circumstances, including
iterators, weak references, stash names, even remaining true after "undef %hash". These things make "defined %hash" fairly useless in
practice.
If a check for non-empty is what you wanted then just put it in boolean context (see "Scalar values" in perldata):
if (%hash) {
# not empty
}
If you had "defined %Foo::Bar::QUUX" to check whether such a package variable exists then that's never really been reliable, and isn't
a good way to enquire about the features of a package, or whether it's loaded, etc.
(?(DEFINE)....) does not allow branches in regex; marked by <-- HERE in m/%s/
(F) You used something like "(?(DEFINE)...|..)" which is illegal. The most likely cause of this error is that you left out a
parenthesis inside of the "...." part.
The <-- HERE shows in the regular expression about where the problem was discovered.
%s defines neither package nor VERSION--version check failed
(F) You said something like "use Module 42" but in the Module file there are neither package declarations nor a $VERSION.
Delimiter for here document is too long
(F) In a here document construct like "<<FOO", the label "FOO" is too long for Perl to handle. You have to be seriously twisted to
write code that triggers this error.
Deprecated character in N{...}; marked by <-- HERE in N{%s<-- HERE %s
(D deprecated) Just about anything is legal for the "..." in "N{...}". But starting in 5.12, non-reasonable ones that don't look like
names are deprecated. A reasonable name begins with an alphabetic character and continues with any combination of alphanumerics,
dashes, spaces, parentheses or colons.
Deprecated use of my() in false conditional
(D deprecated) You used a declaration similar to "my $x if 0". There has been a long-standing bug in Perl that causes a lexical
variable not to be cleared at scope exit when its declaration includes a false conditional. Some people have exploited this bug to
achieve a kind of static variable. Since we intend to fix this bug, we don't want people relying on this behavior. You can achieve a
similar static effect by declaring the variable in a separate block outside the function, eg
sub f { my $x if 0; return $x++ }
becomes
{ my $x; sub f { return $x++ } }
Beginning with perl 5.9.4, you can also use "state" variables to have lexicals that are initialized only once (see feature):
sub f { state $x; return $x++ }
DESTROY created new reference to dead object '%s'
(F) A DESTROY() method created a new reference to the object which is just being DESTROYed. Perl is confused, and prefers to abort
rather than to create a dangling reference.
Did not produce a valid header
See Server error.
%s did not return a true value
(F) A required (or used) file must return a true value to indicate that it compiled correctly and ran its initialization code
correctly. It's traditional to end such a file with a "1;", though any true value would do. See "require" in perlfunc.
(Did you mean &%s instead?)
(W misc) You probably referred to an imported subroutine &FOO as $FOO or some such.
(Did you mean "local" instead of "our"?)
(W misc) Remember that "our" does not localize the declared global variable. You have declared it again in the same lexical scope,
which seems superfluous.
(Did you mean $ or @ instead of %?)
(W) You probably said %hash{$key} when you meant $hash{$key} or @hash{@keys}. On the other hand, maybe you just meant %hash and got
carried away.
Died
(F) You passed die() an empty string (the equivalent of "die """) or you called it with no args and $@ was empty.
Document contains no data
See Server error.
%s does not define %s::VERSION--version check failed
(F) You said something like "use Module 42" but the Module did not define a "$VERSION."
'/' does not take a repeat count
(F) You cannot put a repeat count of any kind right after the '/' code. See "pack" in perlfunc.
Don't know how to handle magic of type '%s'
(P) The internal handling of magical variables has been cursed.
do_study: out of memory
(P) This should have been caught by safemalloc() instead.
(Do you need to predeclare %s?)
(S syntax) This is an educated guess made in conjunction with the message "%s found where operator expected". It often means a
subroutine or module name is being referenced that hasn't been declared yet. This may be because of ordering problems in your file, or
because of a missing "sub", "package", "require", or "use" statement. If you're referencing something that isn't defined yet, you
don't actually have to define the subroutine or package before the current location. You can use an empty "sub foo;" or "package FOO;"
to enter a "forward" declaration.
dump() better written as CORE::dump()
(W misc) You used the obsolescent "dump()" built-in function, without fully qualifying it as "CORE::dump()". Maybe it's a typo. See
"dump" in perlfunc.
dump is not supported
(F) Your machine doesn't support dump/undump.
Duplicate free() ignored
(S malloc) An internal routine called free() on something that had already been freed.
Duplicate modifier '%c' after '%c' in %s
(W) You have applied the same modifier more than once after a type in a pack template. See "pack" in perlfunc.
elseif should be elsif
(S syntax) There is no keyword "elseif" in Perl because Larry thinks it's ugly. Your code will be interpreted as an attempt to call a
method named "elseif" for the class returned by the following block. This is unlikely to be what you want.
Empty %s
(F) "p" and "P" are used to introduce a named Unicode property, as described in perlunicode and perlre. You used "p" or "P" in a
regular expression without specifying the property name.
entering effective %s failed
(F) While under the "use filetest" pragma, switching the real and effective uids or gids failed.
%ENV is aliased to %s
(F) You're running under taint mode, and the %ENV variable has been aliased to another hash, so it doesn't reflect anymore the state of
the program's environment. This is potentially insecure.
Error converting file specification %s
(F) An error peculiar to VMS. Because Perl may have to deal with file specifications in either VMS or Unix syntax, it converts them to
a single form when it must operate on them directly. Either you've passed an invalid file specification to Perl, or you've found a
case the conversion routines don't handle. Drat.
%s: Eval-group in insecure regular expression
(F) Perl detected tainted data when trying to compile a regular expression that contains the "(?{ ... })" zero-width assertion, which
is unsafe. See "(?{ code })" in perlre, and perlsec.
%s: Eval-group not allowed at runtime, use re 'eval'
(F) Perl tried to compile a regular expression containing the "(?{ ... })" zero-width assertion at run time, as it would when the
pattern contains interpolated values. Since that is a security risk, it is not allowed. If you insist, you may still do this by using
the "re 'eval'" pragma or by explicitly building the pattern from an interpolated string at run time and using that in an eval(). See
"(?{ code })" in perlre.
%s: Eval-group not allowed, use re 'eval'
(F) A regular expression contained the "(?{ ... })" zero-width assertion, but that construct is only allowed when the "use re 'eval'"
pragma is in effect. See "(?{ code })" in perlre.
EVAL without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
(F) You used a pattern that nested too many EVAL calls without consuming any text. Restructure the pattern so that text is consumed.
The <-- HERE shows in the regular expression about where the problem was discovered.
Excessively long <> operator
(F) The contents of a <> operator may not exceed the maximum size of a Perl identifier. If you're just trying to glob a long list of
filenames, try using the glob() operator, or put the filenames into a variable and glob that.
exec? I'm not *that* kind of operating system
(F) The "exec" function is not implemented on some systems, e.g., Symbian OS. See perlport.
Execution of %s aborted due to compilation errors.
(F) The final summary message when a Perl compilation fails.
Exiting eval via %s
(W exiting) You are exiting an eval by unconventional means, such as a goto, or a loop control statement.
Exiting format via %s
(W exiting) You are exiting a format by unconventional means, such as a goto, or a loop control statement.
Exiting pseudo-block via %s
(W exiting) You are exiting a rather special block construct (like a sort block or subroutine) by unconventional means, such as a goto,
or a loop control statement. See "sort" in perlfunc.
Exiting subroutine via %s
(W exiting) You are exiting a subroutine by unconventional means, such as a goto, or a loop control statement.
Exiting substitution via %s
(W exiting) You are exiting a substitution by unconventional means, such as a return, a goto, or a loop control statement.
Explicit blessing to '' (assuming package main)
(W misc) You are blessing a reference to a zero length string. This has the effect of blessing the reference into the package main.
This is usually not what you want. Consider providing a default target package, e.g. bless($ref, $p || 'MyPackage');
%s: Expression syntax
(A) You've accidentally run your script through csh instead of Perl. Check the #! line, or manually feed your script into Perl
yourself.
%s failed--call queue aborted
(F) An untrapped exception was raised while executing a UNITCHECK, CHECK, INIT, or END subroutine. Processing of the remainder of the
queue of such routines has been prematurely ended.
False [] range "%s" in regex; marked by <-- HERE in m/%s/
(W regexp) A character class range must start and end at a literal character, not another character class like "d" or "[:alpha:]".
The "-" in your false range is interpreted as a literal "-". Consider quoting the "-", "-". The <-- HERE shows in the regular
expression about where the problem was discovered. See perlre.
Fatal VMS error (status=%d) at %s, line %d
(P) An error peculiar to VMS. Something untoward happened in a VMS system service or RTL routine; Perl's exit status should provide
more details. The filename in "at %s" and the line number in "line %d" tell you which section of the Perl source code is distressed.
fcntl is not implemented
(F) Your machine apparently doesn't implement fcntl(). What is this, a PDP-11 or something?
FETCHSIZE returned a negative value
(F) A tied array claimed to have a negative number of elements, which is not possible.
Field too wide in 'u' format in pack
(W pack) Each line in an uuencoded string start with a length indicator which can't encode values above 63. So there is no point in
asking for a line length bigger than that. Perl will behave as if you specified "u63" as the format.
Filehandle %s opened only for input
(W io) You tried to write on a read-only filehandle. If you intended it to be a read-write filehandle, you needed to open it with "+<"
or "+>" or "+>>" instead of with "<" or nothing. If you intended only to write the file, use ">" or ">>". See "open" in perlfunc.
Filehandle %s opened only for output
(W io) You tried to read from a filehandle opened only for writing, If you intended it to be a read/write filehandle, you needed to
open it with "+<" or "+>" or "+>>" instead of with ">". If you intended only to read from the file, use "<". See "open" in perlfunc.
Another possibility is that you attempted to open filedescriptor 0 (also known as STDIN) for output (maybe you closed STDIN earlier?).
Filehandle %s reopened as %s only for input
(W io) You opened for reading a filehandle that got the same filehandle id as STDOUT or STDERR. This occurred because you closed
STDOUT or STDERR previously.
Filehandle STDIN reopened as %s only for output
(W io) You opened for writing a filehandle that got the same filehandle id as STDIN. This occurred because you closed STDIN
previously.
Final $ should be $ or $name
(F) You must now decide whether the final $ in a string was meant to be a literal dollar sign, or was meant to introduce a variable
name that happens to be missing. So you have to put either the backslash or the name.
flock() on closed filehandle %s
(W closed) The filehandle you're attempting to flock() got itself closed some time before now. Check your control flow. flock()
operates on filehandles. Are you attempting to call flock() on a dirhandle by the same name?
Format not terminated
(F) A format must be terminated by a line with a solitary dot. Perl got to the end of your file without finding such a line.
Format %s redefined
(W redefine) You redefined a format. To suppress this warning, say
{
no warnings 'redefine';
eval "format NAME =...";
}
Found = in conditional, should be ==
(W syntax) You said
if ($foo = 123)
when you meant
if ($foo == 123)
(or something like that).
%s found where operator expected
(S syntax) The Perl lexer knows whether to expect a term or an operator. If it sees what it knows to be a term when it was expecting
to see an operator, it gives you this warning. Usually it indicates that an operator or delimiter was omitted, such as a semicolon.
gdbm store returned %d, errno %d, key "%s"
(S) A warning from the GDBM_File extension that a store failed.
gethostent not implemented
(F) Your C library apparently doesn't implement gethostent(), probably because if it did, it'd feel morally obligated to return every
hostname on the Internet.
get%sname() on closed socket %s
(W closed) You tried to get a socket or peer socket name on a closed socket. Did you forget to check the return value of your socket()
call?
getpwnam returned invalid UIC %#o for user "%s"
(S) A warning peculiar to VMS. The call to "sys$getuai" underlying the "getpwnam" operator returned an invalid UIC.
getsockopt() on closed socket %s
(W closed) You tried to get a socket option on a closed socket. Did you forget to check the return value of your socket() call? See
"getsockopt" in perlfunc.
Global symbol "%s" requires explicit package name
(F) You've said "use strict" or "use strict vars", which indicates that all variables must either be lexically scoped (using "my" or
"state"), declared beforehand using "our", or explicitly qualified to say which package the global variable is in (using "::").
glob failed (%s)
(S glob) Something went wrong with the external program(s) used for "glob" and "<*.c>". Usually, this means that you supplied a "glob"
pattern that caused the external program to fail and exit with a nonzero status. If the message indicates that the abnormal exit
resulted in a coredump, this may also mean that your csh (C shell) is broken. If so, you should change all of the csh-related
variables in config.sh: If you have tcsh, make the variables refer to it as if it were csh (e.g. "full_csh='/usr/bin/tcsh'");
otherwise, make them all empty (except that "d_csh" should be 'undef') so that Perl will think csh is missing. In either case, after
editing config.sh, run "./Configure -S" and rebuild Perl.
Glob not terminated
(F) The lexer saw a left angle bracket in a place where it was expecting a term, so it's looking for the corresponding right angle
bracket, and not finding it. Chances are you left some needed parentheses out earlier in the line, and you really meant a "less than".
gmtime(%f) too large
(W overflow) You called "gmtime" with a number that was larger than it can reliably handle and "gmtime" probably returned the wrong
date. This warning is also triggered with NaN (the special not-a-number value).
gmtime(%f) too small
(W overflow) You called "gmtime" with a number that was smaller than it can reliably handle and "gmtime" probably returned the wrong
date.
Got an error from DosAllocMem
(P) An error peculiar to OS/2. Most probably you're using an obsolete version of Perl, and this should not happen anyway.
goto must have label
(F) Unlike with "next" or "last", you're not allowed to goto an unspecified destination. See "goto" in perlfunc.
Goto undefined subroutine%s
(F) You tried to call a subroutine with "goto &sub" syntax, but the indicated subroutine hasn't been defined, or if it was, it has
since been undefined.
()-group starts with a count
(F) A ()-group started with a count. A count is supposed to follow something: a template character or a ()-group. See "pack" in
perlfunc.
%s had compilation errors.
(F) The final summary message when a "perl -c" fails.
Had to create %s unexpectedly
(S internal) A routine asked for a symbol from a symbol table that ought to have existed already, but for some reason it didn't, and
had to be created on an emergency basis to prevent a core dump.
Hash %%s missing the % in argument %d of %s()
(D deprecated) Really old Perl let you omit the % on hash names in some spots. This is now heavily deprecated.
%s has too many errors
(F) The parser has given up trying to parse the program after 10 errors. Further error messages would likely be uninformative.
Having no space between pattern and following word is deprecated
(D syntax)
You had a word that isn't a regex modifier immediately following a pattern without an intervening space. If you are trying to use the
"/le" flags on a substitution, use "/el" instead. Otherwise, add white space between the pattern and following word to eliminate the
warning. As an example of the latter, the two constructs:
$a =~ m/$foo/sand $bar
$a =~ m/$foo/s and $bar
both currently mean the same thing, but it is planned to disallow the first form in Perl 5.18. And,
$a =~ m/$foo/and $bar
will be disallowed too.
Hexadecimal number > 0xffffffff non-portable
(W portable) The hexadecimal number you specified is larger than 2**32-1(4294967295) and therefore non-portable between systems. See
perlport for more on portability concerns.
Identifier too long
(F) Perl limits identifiers (names for variables, functions, etc.) to about 250 characters for simple names, and somewhat more for
compound names (like $A::B). You've exceeded Perl's limits. Future versions of Perl are likely to eliminate these arbitrary
limitations.
Ignoring zero length N{} in character class
(W) Named Unicode character escapes "(N{...})" may return a zero-length sequence. When such an escape is used in a character class
its behaviour is not well defined. Check that the correct escape has been used, and the correct charname handler is in scope.
Illegal binary digit %s
(F) You used a digit other than 0 or 1 in a binary number.
Illegal binary digit %s ignored
(W digit) You may have tried to use a digit other than 0 or 1 in a binary number. Interpretation of the binary number stopped before
the offending digit.
Illegal character after '_' in prototype for %s : %s
(W illegalproto) An illegal character was found in a prototype declaration. Legal characters in prototypes are $, @, %, *, ;, [, ], &,
, and +.
Illegal character \%o (carriage return)
(F) Perl normally treats carriage returns in the program text as it would any other whitespace, which means you should never see this
error when Perl was built using standard options. For some reason, your version of Perl appears to have been built without this
support. Talk to your Perl administrator.
Illegal character in prototype for %s : %s
(W illegalproto) An illegal character was found in a prototype declaration. Legal characters in prototypes are $, @, %, *, ;, [, ], &,
, and +.
Illegal declaration of anonymous subroutine
(F) When using the "sub" keyword to construct an anonymous subroutine, you must always specify a block of code. See perlsub.
Illegal declaration of subroutine %s
(F) A subroutine was not declared correctly. See perlsub.
Illegal division by zero
(F) You tried to divide a number by 0. Either something was wrong in your logic, or you need to put a conditional in to guard against
meaningless input.
Illegal hexadecimal digit %s ignored
(W digit) You may have tried to use a character other than 0 - 9 or A - F, a - f in a hexadecimal number. Interpretation of the
hexadecimal number stopped before the illegal character.
Illegal modulus zero
(F) You tried to divide a number by 0 to get the remainder. Most numbers don't take to this kindly.
Illegal number of bits in vec
(F) The number of bits in vec() (the third argument) must be a power of two from 1 to 32 (or 64, if your platform supports that).
Illegal octal digit %s
(F) You used an 8 or 9 in an octal number.
Illegal octal digit %s ignored
(W digit) You may have tried to use an 8 or 9 in an octal number. Interpretation of the octal number stopped before the 8 or 9.
Illegal switch in PERL5OPT: -%c
(X) The PERL5OPT environment variable may only be used to set the following switches: -[CDIMUdmtw].
Ill-formed CRTL environ value "%s"
(W internal) A warning peculiar to VMS. Perl tried to read the CRTL's internal environ array, and encountered an element without the
"=" delimiter used to separate keys from values. The element is ignored.
Ill-formed message in prime_env_iter: |%s|
(W internal) A warning peculiar to VMS. Perl tried to read a logical name or CLI symbol definition when preparing to iterate over
%ENV, and didn't see the expected delimiter between key and value, so the line was ignored.
(in cleanup) %s
(W misc) This prefix usually indicates that a DESTROY() method raised the indicated exception. Since destructors are usually called by
the system at arbitrary points during execution, and often a vast number of times, the warning is issued only once for any number of
failures that would otherwise result in the same message being repeated.
Failure of user callbacks dispatched using the "G_KEEPERR" flag could also result in this warning. See "G_KEEPERR" in perlcall.
Inconsistent hierarchy during C3 merge of class '%s': merging failed on parent '%s'
(F) The method resolution order (MRO) of the given class is not C3-consistent, and you have enabled the C3 MRO for this class. See the
C3 documentation in mro for more information.
In EBCDIC the v-string components cannot exceed 2147483647
(F) An error peculiar to EBCDIC. Internally, v-strings are stored as Unicode code points, and encoded in EBCDIC as UTF-EBCDIC. The
UTF-EBCDIC encoding is limited to code points no larger than 2147483647(0x7FFFFFFF).
Infinite recursion in regex; marked by <-- HERE in m/%s/
(F) You used a pattern that references itself without consuming any input text. You should check the pattern to ensure that recursive
patterns either consume text or fail.
The <-- HERE shows in the regular expression about where the problem was discovered.
Initialization of state variables in list context currently forbidden
(F) Currently the implementation of "state" only permits the initialization of scalar variables in scalar context. Re-write "state
($a) = 42" as "state $a = 42" to change from list to scalar context. Constructions such as "state (@a) = foo()" will be supported in a
future perl release.
Insecure dependency in %s
(F) You tried to do something that the tainting mechanism didn't like. The tainting mechanism is turned on when you're running setuid
or setgid, or when you specify -T to turn it on explicitly. The tainting mechanism labels all data that's derived directly or
indirectly from the user, who is considered to be unworthy of your trust. If any such data is used in a "dangerous" operation, you get
this error. See perlsec for more information.
Insecure directory in %s
(F) You can't use system(), exec(), or a piped open in a setuid or setgid script if $ENV{PATH} contains a directory that is writable by
the world. Also, the PATH must not contain any relative directory. See perlsec.
Insecure $ENV{%s} while running %s
(F) You can't use system(), exec(), or a piped open in a setuid or setgid script if any of $ENV{PATH}, $ENV{IFS}, $ENV{CDPATH},
$ENV{ENV}, $ENV{BASH_ENV} or $ENV{TERM} are derived from data supplied (or potentially supplied) by the user. The script must set the
path to a known value, using trustworthy data. See perlsec.
Insecure user-defined property %s
(F) Perl detected tainted data when trying to compile a regular expression that contains a call to a user-defined character property
function, i.e. "p{IsFoo}" or "p{InFoo}". See "User-Defined Character Properties" in perlunicode and perlsec.
Integer overflow in format string for %s
(F) The indexes and widths specified in the format string of "printf()" or "sprintf()" are too large. The numbers must not overflow
the size of integers for your architecture.
Integer overflow in %s number
(W overflow) The hexadecimal, octal or binary number you have specified either as a literal or as an argument to hex() or oct() is too
big for your architecture, and has been converted to a floating point number. On a 32-bit architecture the largest hexadecimal, octal
or binary number representable without overflow is 0xFFFFFFFF, 037777777777, or 0b11111111111111111111111111111111 respectively. Note
that Perl transparently promotes all numbers to a floating point representation internally--subject to loss of precision errors in
subsequent operations.
Integer overflow in version
(F) Some portion of a version initialization is too large for the size of integers for your architecture. This is not a warning
because there is no rational reason for a version to try and use a element larger than typically 2**32. This is usually caused by
trying to use some odd mathematical operation as a version, like 100/9.
Internal disaster in regex; marked by <-- HERE in m/%s/
(P) Something went badly wrong in the regular expression parser. The <-- HERE shows in the regular expression about where the problem
was discovered.
Internal inconsistency in tracking vforks
(S) A warning peculiar to VMS. Perl keeps track of the number of times you've called "fork" and "exec", to determine whether the
current call to "exec" should affect the current script or a subprocess (see "exec LIST" in perlvms). Somehow, this count has become
scrambled, so Perl is making a guess and treating this "exec" as a request to terminate the Perl script and execute the specified
command.
Internal urp in regex; marked by <-- HERE in m/%s/
(P) Something went badly awry in the regular expression parser. The <-- HERE shows in the regular expression about where the problem
was discovered.
%s (...) interpreted as function
(W syntax) You've run afoul of the rule that says that any list operator followed by parentheses turns into a function, with all the
list operators arguments found inside the parentheses. See "Terms and List Operators (Leftward)" in perlop.
Invalid %s attribute: %s
(F) The indicated attribute for a subroutine or variable was not recognized by Perl or by a user-supplied handler. See attributes.
Invalid %s attributes: %s
(F) The indicated attributes for a subroutine or variable were not recognized by Perl or by a user-supplied handler. See attributes.
Invalid conversion in %s: "%s"
(W printf) Perl does not understand the given format conversion. See "sprintf" in perlfunc.
Invalid escape in the specified encoding in regex; marked by <-- HERE in m/%s/
(W regexp) The numeric escape (for example "xHH") of value < 256 didn't correspond to a single character through the conversion from
the encoding specified by the encoding pragma. The escape was replaced with REPLACEMENT CHARACTER (U+FFFD) instead. The <-- HERE
shows in the regular expression about where the escape was discovered.
Invalid hexadecimal number in N{U+...}
(F) The character constant represented by "..." is not a valid hexadecimal number. Either it is empty, or you tried to use a character
other than 0 - 9 or A - F, a - f in a hexadecimal number.
Invalid module name %s with -%c option: contains single ':'
(F) The module argument to perl's -m and -M command-line options cannot contain single colons in the module name, but only in the
arguments after "=". In other words, -MFoo::Bar=:baz is ok, but -MFoo:Bar=baz is not.
Invalid mro name: '%s'
(F) You tried to "mro::set_mro("classname", "foo")" or "use mro 'foo'", where "foo" is not a valid method resolution order (MRO).
Currently, the only valid ones supported are "dfs" and "c3", unless you have loaded a module that is a MRO plugin. See mro and
perlmroapi.
invalid option -D%c, use -D'' to see choices
(F) Perl was called with invalid debugger flags. Call perl with the -D option with no flags to see the list of acceptable values. See
also "-Dletters" in perlrun.
Invalid [] range "%s" in regex; marked by <-- HERE in m/%s/
(F) The range specified in a character class had a minimum character greater than the maximum character. One possibility is that you
forgot the "{}" from your ending "x{}" - "x" without the curly braces can go only up to "ff". The <-- HERE shows in the regular
expression about where the problem was discovered. See perlre.
Invalid range "%s" in transliteration operator
(F) The range specified in the tr/// or y/// operator had a minimum character greater than the maximum character. See perlop.
Invalid separator character %s in attribute list
(F) Something other than a colon or whitespace was seen between the elements of an attribute list. If the previous attribute had a
parenthesised parameter list, perhaps that list was terminated too soon. See attributes.
Invalid separator character %s in PerlIO layer specification %s
(W layer) When pushing layers onto the Perl I/O system, something other than a colon or whitespace was seen between the elements of a
layer list. If the previous attribute had a parenthesised parameter list, perhaps that list was terminated too soon.
Invalid strict version format (%s)
(F) A version number did not meet the "strict" criteria for versions. A "strict" version number is a positive decimal number (integer
or decimal-fraction) without exponentiation or else a dotted-decimal v-string with a leading 'v' character and at least three
components. The parenthesized text indicates which criteria were not met. See the version module for more details on allowed version
formats.
Invalid type '%s' in %s
(F) The given character is not a valid pack or unpack type. See "pack" in perlfunc.
(W) The given character is not a valid pack or unpack type but used to be silently ignored.
Invalid version format (%s)
(F) A version number did not meet the "lax" criteria for versions. A "lax" version number is a positive decimal number (integer or
decimal-fraction) without exponentiation or else a dotted-decimal v-string. If the v-string has fewer than three components, it must
have a leading 'v' character. Otherwise, the leading 'v' is optional. Both decimal and dotted-decimal versions may have a trailing
"alpha" component separated by an underscore character after a fractional or dotted-decimal component. The parenthesized text
indicates which criteria were not met. See the version module for more details on allowed version formats.
Invalid version object
(F) The internal structure of the version object was invalid. Perhaps the internals were modified directly in some way or an arbitrary
reference was blessed into the "version" class.
ioctl is not implemented
(F) Your machine apparently doesn't implement ioctl(), which is pretty strange for a machine that supports C.
ioctl() on unopened %s
(W unopened) You tried ioctl() on a filehandle that was never opened. Check your control flow and number of arguments.
IO layers (like '%s') unavailable
(F) Your Perl has not been configured to have PerlIO, and therefore you cannot use IO layers. To have PerlIO, Perl must be configured
with 'useperlio'.
IO::Socket::atmark not implemented on this architecture
(F) Your machine doesn't implement the sockatmark() functionality, neither as a system call nor an ioctl call (SIOCATMARK).
$* is no longer supported
(D deprecated, syntax) The special variable $*, deprecated in older perls, has been removed as of 5.9.0 and is no longer supported. In
previous versions of perl the use of $* enabled or disabled multi-line matching within a string.
Instead of using $* you should use the "/m" (and maybe "/s") regexp modifiers. You can enable "/m" for a lexical scope (even a whole
file) with "use re '/m'". (In older versions: when $* was set to a true value then all regular expressions behaved as if they were
written using "/m".)
$# is no longer supported
(D deprecated, syntax) The special variable $#, deprecated in older perls, has been removed as of 5.9.3 and is no longer supported.
You should use the printf/sprintf functions instead.
'%s' is not a code reference
(W overload) The second (fourth, sixth, ...) argument of overload::constant needs to be a code reference. Either an anonymous
subroutine, or a reference to a subroutine.
'%s' is not an overloadable type
(W overload) You tried to overload a constant type the overload package is unaware of.
junk on end of regexp
(P) The regular expression parser is confused.
Label not found for "last %s"
(F) You named a loop to break out of, but you're not currently in a loop of that name, not even if you count where you were called
from. See "last" in perlfunc.
Label not found for "next %s"
(F) You named a loop to continue, but you're not currently in a loop of that name, not even if you count where you were called from.
See "last" in perlfunc.
Label not found for "redo %s"
(F) You named a loop to restart, but you're not currently in a loop of that name, not even if you count where you were called from.
See "last" in perlfunc.
leaving effective %s failed
(F) While under the "use filetest" pragma, switching the real and effective uids or gids failed.
length/code after end of string in unpack
(F) While unpacking, the string buffer was already used up when an unpack length/code combination tried to obtain more data. This
results in an undefined value for the length. See "pack" in perlfunc.
length() used on %s
(W syntax) You used length() on either an array or a hash when you probably wanted a count of the items.
Array size can be obtained by doing:
scalar(@array);
The number of items in a hash can be obtained by doing:
scalar(keys %hash);
Lexing code attempted to stuff non-Latin-1 character into Latin-1 input
(F) An extension is attempting to insert text into the current parse (using lex_stuff_pvn or similar), but tried to insert a character
that couldn't be part of the current input. This is an inherent pitfall of the stuffing mechanism, and one of the reasons to avoid it.
Where it is necessary to stuff, stuffing only plain ASCII is recommended.
Lexing code internal error (%s)
(F) Lexing code supplied by an extension violated the lexer's API in a detectable way.
listen() on closed socket %s
(W closed) You tried to do a listen on a closed socket. Did you forget to check the return value of your socket() call? See "listen"
in perlfunc.
List form of piped open not implemented
(F) On some platforms, notably Windows, the three-or-more-arguments form of "open" does not support pipes, such as "open($pipe, '|-',
@args)". Use the two-argument "open($pipe, '|prog arg1 arg2...')" form instead.
localtime(%f) too large
(W overflow) You called "localtime" with a number that was larger than it can reliably handle and "localtime" probably returned the
wrong date. This warning is also triggered with NaN (the special not-a-number value).
localtime(%f) too small
(W overflow) You called "localtime" with a number that was smaller than it can reliably handle and "localtime" probably returned the
wrong date.
Lookbehind longer than %d not implemented in regex m/%s/
(F) There is currently a limit on the length of string which lookbehind can handle. This restriction may be eased in a future release.
Lost precision when %s %f by 1
(W) The value you attempted to increment or decrement by one is too large for the underlying floating point representation to store
accurately, hence the target of "++" or "--" is unchanged. Perl issues this warning because it has already switched from integers to
floating point when values are too large for integers, and now even floating point is insufficient. You may wish to switch to using
Math::BigInt explicitly.
lstat() on filehandle%s
(W io) You tried to do an lstat on a filehandle. What did you mean by that? lstat() makes sense only on filenames. (Perl did a
fstat() instead on the filehandle.)
lvalue attribute %s already-defined subroutine
(W misc) Although attributes.pm allows this, turning the lvalue attribute on or off on a Perl subroutine that is already defined does
not always work properly. It may or may not do what you want, depending on what code is inside the subroutine, with exact details
subject to change between Perl versions. Only do this if you really know what you are doing.
lvalue attribute ignored after the subroutine has been defined
(W misc) Using the ":lvalue" declarative syntax to make a Perl subroutine an lvalue subroutine after it has been defined is not
permitted. To make the subroutine an lvalue subroutine, add the lvalue attribute to the definition, or put the "sub foo :lvalue;"
declaration before the definition.
See also attributes.pm.
Malformed integer in [] in pack
(F) Between the brackets enclosing a numeric repeat count only digits are permitted. See "pack" in perlfunc.
Malformed integer in [] in unpack
(F) Between the brackets enclosing a numeric repeat count only digits are permitted. See "pack" in perlfunc.
Malformed PERLLIB_PREFIX
(F) An error peculiar to OS/2. PERLLIB_PREFIX should be of the form
prefix1;prefix2
or
prefix1 prefix2
with nonempty prefix1 and prefix2. If "prefix1" is indeed a prefix of a builtin library search path, prefix2 is substituted. The
error may appear if components are not found, or are too long. See "PERLLIB_PREFIX" in perlos2.
Malformed prototype for %s: %s
(F) You tried to use a function with a malformed prototype. The syntax of function prototypes is given a brief compile-time check for
obvious errors like invalid characters. A more rigorous check is run when the function is called.
Malformed UTF-8 character (%s)
(S utf8)(F) Perl detected a string that didn't comply with UTF-8 encoding rules, even though it had the UTF8 flag on.
One possible cause is that you set the UTF8 flag yourself for data that you thought to be in UTF-8 but it wasn't (it was for example
legacy 8-bit data). To guard against this, you can use Encode::decode_utf8.
If you use the ":encoding(UTF-8)" PerlIO layer for input, invalid byte sequences are handled gracefully, but if you use ":utf8", the
flag is set without validating the data, possibly resulting in this error message.
See also "Handling Malformed Data" in Encode.
Malformed UTF-8 returned by N
(F) The charnames handler returned malformed UTF-8.
Malformed UTF-8 string in '%c' format in unpack
(F) You tried to unpack something that didn't comply with UTF-8 encoding rules and perl was unable to guess how to make more progress.
Malformed UTF-8 string in pack
(F) You tried to pack something that didn't comply with UTF-8 encoding rules and perl was unable to guess how to make more progress.
Malformed UTF-8 string in unpack
(F) You tried to unpack something that didn't comply with UTF-8 encoding rules and perl was unable to guess how to make more progress.
Malformed UTF-16 surrogate
(F) Perl thought it was reading UTF-16 encoded character data but while doing it Perl met a malformed Unicode surrogate.
%s matches null string many times in regex; marked by <-- HERE in m/%s/
(W regexp) The pattern you've specified would be an infinite loop if the regular expression engine didn't specifically check for that.
The <-- HERE shows in the regular expression about where the problem was discovered. See perlre.
Maximal count of pending signals (%u) exceeded
(F) Perl aborted due to too high a number of signals pending. This usually indicates that your operating system tried to deliver
signals too fast (with a very high priority), starving the perl process from resources it would need to reach a point where it can
process signals safely. (See "Deferred Signals (Safe Signals)" in perlipc.)
"%s" may clash with future reserved word
(W) This warning may be due to running a perl5 script through a perl4 interpreter, especially if the word that is being warned about is
"use" or "my".
'%' may not be used in pack
(F) You can't pack a string by supplying a checksum, because the checksumming process loses information, and you can't go the other
way. See "unpack" in perlfunc.
Method for operation %s not found in package %s during blessing
(F) An attempt was made to specify an entry in an overloading table that doesn't resolve to a valid subroutine. See overload.
Method %s not permitted
See Server error.
Might be a runaway multi-line %s string starting on line %d
(S) An advisory indicating that the previous error may have been caused by a missing delimiter on a string or pattern, because it
eventually ended earlier on the current line.
Misplaced _ in number
(W syntax) An underscore (underbar) in a numeric constant did not separate two digits.
Missing argument in %s
(W uninitialized) A printf-type format required more arguments than were supplied.
Missing argument to -%c
(F) The argument to the indicated command line switch must follow immediately after the switch, without intervening spaces.
Missing braces on N{}
(F) Wrong syntax of character name literal "N{charname}" within double-quotish context. This can also happen when there is a space
(or comment) between the "N" and the "{" in a regex with the "/x" modifier. This modifier does not change the requirement that the
brace immediately follow the "N".
Missing braces on o{}
(F) A "o" must be followed immediately by a "{" in double-quotish context.
Missing comma after first argument to %s function
(F) While certain functions allow you to specify a filehandle or an "indirect object" before the argument list, this ain't one of them.
Missing command in piped open
(W pipe) You used the "open(FH, "| command")" or "open(FH, "command |")" construction, but the command was missing or blank.
Missing control char name in c
(F) A double-quoted string ended with "c", without the required control character name.
Missing name in "my sub"
(F) The reserved syntax for lexically scoped subroutines requires that they have a name with which they can be found.
Missing $ on loop variable
(F) Apparently you've been programming in csh too much. Variables are always mentioned with the $ in Perl, unlike in the shells, where
it can vary from one line to the next.
(Missing operator before %s?)
(S syntax) This is an educated guess made in conjunction with the message "%s found where operator expected". Often the missing
operator is a comma.
Missing right brace on %s
(F) Missing right brace in "x{...}", "p{...}", "P{...}", or "N{...}".
Missing right brace on N{} or unescaped left brace after N
(F) "N" has two meanings.
The traditional one has it followed by a name enclosed in braces, meaning the character (or sequence of characters) given by that name.
Thus "N{ASTERISK}" is another way of writing "*", valid in both double-quoted strings and regular expression patterns. In patterns,
it doesn't have the meaning an unescaped "*" does.
Starting in Perl 5.12.0, "N" also can have an additional meaning (only) in patterns, namely to match a non-newline character. (This
is short for "[^
]", and like "." but is not affected by the "/s" regex modifier.)
This can lead to some ambiguities. When "N" is not followed immediately by a left brace, Perl assumes the "[^
]" meaning. Also, if
the braces form a valid quantifier such as "N{3}" or "N{5,}", Perl assumes that this means to match the given quantity of non-
newlines (in these examples, 3; and 5 or more, respectively). In all other case, where there is a "N{" and a matching "}", Perl
assumes that a character name is desired.
However, if there is no matching "}", Perl doesn't know if it was mistakenly omitted, or if "[^
]{" was desired, and raises this
error. If you meant the former, add the right brace; if you meant the latter, escape the brace with a backslash, like so: "N{"
Missing right curly or square bracket
(F) The lexer counted more opening curly or square brackets than closing ones. As a general rule, you'll find it's missing near the
place you were last editing.
(Missing semicolon on previous line?)
(S syntax) This is an educated guess made in conjunction with the message "%s found where operator expected". Don't automatically put
a semicolon on the previous line just because you saw this message.
Modification of a read-only value attempted
(F) You tried, directly or indirectly, to change the value of a constant. You didn't, of course, try "2 = 1", because the compiler
catches that. But an easy way to do the same thing is:
sub mod { $_[0] = 1 }
mod(2);
Another way is to assign to a substr() that's off the end of the string.
Yet another way is to assign to a "foreach" loop VAR when VAR is aliased to a constant in the look LIST:
$x = 1;
foreach my $n ($x, 2) {
$n *= 2; # modifies the $x, but fails on attempt to
} # modify the 2
Modification of non-creatable array value attempted, %s
(F) You tried to make an array value spring into existence, and the subscript was probably negative, even counting from end of the
array backwards.
Modification of non-creatable hash value attempted, %s
(P) You tried to make a hash value spring into existence, and it couldn't be created for some peculiar reason.
Module name must be constant
(F) Only a bare module name is allowed as the first argument to a "use".
Module name required with -%c option
(F) The "-M" or "-m" options say that Perl should load some module, but you omitted the name of the module. Consult perlrun for full
details about "-M" and "-m".
More than one argument to '%s' open
(F) The "open" function has been asked to open multiple files. This can happen if you are trying to open a pipe to a command that
takes a list of arguments, but have forgotten to specify a piped open mode. See "open" in perlfunc for details.
msg%s not implemented
(F) You don't have System V message IPC on your system.
Multidimensional syntax %s not supported
(W syntax) Multidimensional arrays aren't written like $foo[1,2,3]. They're written like $foo[1][2][3], as in C.
'/' must follow a numeric type in unpack
(F) You had an unpack template that contained a '/', but this did not follow some unpack specification producing a numeric value. See
"pack" in perlfunc.
"my sub" not yet implemented
(F) Lexically scoped subroutines are not yet implemented. Don't try that yet.
"my" variable %s can't be in a package
(F) Lexically scoped variables aren't in a package, so it doesn't make sense to try to declare one with a package qualifier on the
front. Use local() if you want to localize a package variable.
Name "%s::%s" used only once: possible typo
(W once) Typographical errors often show up as unique variable names. If you had a good reason for having a unique name, then just
mention it again somehow to suppress the message. The "our" declaration is provided for this purpose.
NOTE: This warning detects symbols that have been used only once so $c, @c, %c, *c, &c, sub c{}, c(), and c (the filehandle or format)
are considered the same; if a program uses $c only once but also uses any of the others it will not trigger this warning.
N in a character class must be a named character: N{...}
(F) The new (5.12) meaning of "N" as "[^
]" is not valid in a bracketed character class, for the same reason that "." in a character
class loses its specialness: it matches almost everything, which is probably not what you want.
N{NAME} must be resolved by the lexer
(F) When compiling a regex pattern, an unresolved named character or sequence was encountered. This can happen in any of several ways
that bypass the lexer, such as using single-quotish context, or an extra backslash in double-quotish:
$re = 'N{SPACE}'; # Wrong!
$re = "\N{SPACE}"; # Wrong!
/$re/;
Instead, use double-quotes with a single backslash:
$re = "N{SPACE}"; # ok
/$re/;
The lexer can be bypassed as well by creating the pattern from smaller components:
$re = 'N';
/${re}{SPACE}/; # Wrong!
It's not a good idea to split a construct in the middle like this, and it doesn't work here. Instead use the solution above.
Finally, the message also can happen under the "/x" regex modifier when the "N" is separated by spaces from the "{", in which case,
remove the spaces.
/N {SPACE}/x; # Wrong!
/N{SPACE}/x; # ok
Negative '/' count in unpack
(F) The length count obtained from a length/code unpack operation was negative. See "pack" in perlfunc.
Negative length
(F) You tried to do a read/write/send/recv operation with a buffer length that is less than 0. This is difficult to imagine.
Negative offset to vec in lvalue context
(F) When "vec" is called in an lvalue context, the second argument must be greater than or equal to zero.
Nested quantifiers in regex; marked by <-- HERE in m/%s/
(F) You can't quantify a quantifier without intervening parentheses. So things like ** or +* or ?* are illegal. The <-- HERE shows in
the regular expression about where the problem was discovered.
Note that the minimal matching quantifiers, "*?", "+?", and "??" appear to be nested quantifiers, but aren't. See perlre.
%s never introduced
(S internal) The symbol in question was declared but somehow went out of scope before it could possibly have been used.
next::method/next::can/maybe::next::method cannot find enclosing method
(F) "next::method" needs to be called within the context of a real method in a real package, and it could not find such a context. See
mro.
No %s allowed while running setuid
(F) Certain operations are deemed to be too insecure for a setuid or setgid script to even be allowed to attempt. Generally speaking
there will be another way to do what you want that is, if not secure, at least securable. See perlsec.
No code specified for -%c
(F) Perl's -e and -E command-line options require an argument. If you want to run an empty program, pass the empty string as a
separate argument or run a program consisting of a single 0 or 1:
perl -e ""
perl -e0
perl -e1
No comma allowed after %s
(F) A list operator that has a filehandle or "indirect object" is not allowed to have a comma between that and the following arguments.
Otherwise it'd be just another one of the arguments.
One possible cause for this is that you expected to have imported a constant to your name space with use or import while no such
importing took place, it may for example be that your operating system does not support that particular constant. Hopefully you did
use an explicit import list for the constants you expect to see; please see "use" in perlfunc and "import" in perlfunc. While an
explicit import list would probably have caught this error earlier it naturally does not remedy the fact that your operating system
still does not support that constant. Maybe you have a typo in the constants of the symbol import list of use or import or in the
constant name at the line where this error was triggered?
No command into which to pipe on command line
(F) An error peculiar to VMS. Perl handles its own command line redirection, and found a '|' at the end of the command line, so it
doesn't know where you want to pipe the output from this command.
No DB::DB routine defined
(F) The currently executing code was compiled with the -d switch, but for some reason the current debugger (e.g. perl5db.pl or a
"Devel::" module) didn't define a routine to be called at the beginning of each statement.
No dbm on this machine
(P) This is counted as an internal error, because every machine should supply dbm nowadays, because Perl comes with SDBM. See
SDBM_File.
No DB::sub routine defined
(F) The currently executing code was compiled with the -d switch, but for some reason the current debugger (e.g. perl5db.pl or a
"Devel::" module) didn't define a "DB::sub" routine to be called at the beginning of each ordinary subroutine call.
No directory specified for -I
(F) The -I command-line switch requires a directory name as part of the same argument. Use -Ilib, for instance. -I lib won't work.
No error file after 2> or 2>> on command line
(F) An error peculiar to VMS. Perl handles its own command line redirection, and found a '2>' or a '2>>' on the command line, but
can't find the name of the file to which to write data destined for stderr.
No group ending character '%c' found in template
(F) A pack or unpack template has an opening '(' or '[' without its matching counterpart. See "pack" in perlfunc.
No input file after < on command line
(F) An error peculiar to VMS. Perl handles its own command line redirection, and found a '<' on the command line, but can't find the
name of the file from which to read data for stdin.
No next::method '%s' found for %s
(F) "next::method" found no further instances of this method name in the remaining packages of the MRO of this class. If you don't
want it throwing an exception, use "maybe::next::method" or "next::can". See mro.
"no" not allowed in expression
(F) The "no" keyword is recognized and executed at compile time, and returns no useful value. See perlmod.
No output file after > on command line
(F) An error peculiar to VMS. Perl handles its own command line redirection, and found a lone '>' at the end of the command line, so
it doesn't know where you wanted to redirect stdout.
No output file after > or >> on command line
(F) An error peculiar to VMS. Perl handles its own command line redirection, and found a '>' or a '>>' on the command line, but can't
find the name of the file to which to write data destined for stdout.
No package name allowed for variable %s in "our"
(F) Fully qualified variable names are not allowed in "our" declarations, because that doesn't make much sense under existing
semantics. Such syntax is reserved for future extensions.
No Perl script found in input
(F) You called "perl -x", but no line was found in the file beginning with #! and containing the word "perl".
No setregid available
(F) Configure didn't find anything resembling the setregid() call for your system.
No setreuid available
(F) Configure didn't find anything resembling the setreuid() call for your system.
No such class field "%s" in variable %s of type %s
(F) You tried to access a key from a hash through the indicated typed variable but that key is not allowed by the package of the same
type. The indicated package has restricted the set of allowed keys using the fields pragma.
No such class %s
(F) You provided a class qualifier in a "my", "our" or "state" declaration, but this class doesn't exist at this point in your program.
No such hook: %s
(F) You specified a signal hook that was not recognized by Perl. Currently, Perl accepts "__DIE__" and "__WARN__" as valid signal
hooks.
No such pipe open
(P) An error peculiar to VMS. The internal routine my_pclose() tried to close a pipe which hadn't been opened. This should have been
caught earlier as an attempt to close an unopened filehandle.
No such signal: SIG%s
(W signal) You specified a signal name as a subscript to %SIG that was not recognized. Say "kill -l" in your shell to see the valid
signal names on your system.
Not a CODE reference
(F) Perl was trying to evaluate a reference to a code value (that is, a subroutine), but found a reference to something else instead.
You can use the ref() function to find out what kind of ref it really was. See also perlref.
Not a format reference
(F) I'm not sure how you managed to generate a reference to an anonymous format, but this indicates you did, and that it didn't exist.
Not a GLOB reference
(F) Perl was trying to evaluate a reference to a "typeglob" (that is, a symbol table entry that looks like *foo), but found a reference
to something else instead. You can use the ref() function to find out what kind of ref it really was. See perlref.
Not a HASH reference
(F) Perl was trying to evaluate a reference to a hash value, but found a reference to something else instead. You can use the ref()
function to find out what kind of ref it really was. See perlref.
Not an ARRAY reference
(F) Perl was trying to evaluate a reference to an array value, but found a reference to something else instead. You can use the ref()
function to find out what kind of ref it really was. See perlref.
Not an unblessed ARRAY reference
(F) You passed a reference to a blessed array to "push", "shift" or another array function. These only accept unblessed array
references or arrays beginning explicitly with "@".
Not a SCALAR reference
(F) Perl was trying to evaluate a reference to a scalar value, but found a reference to something else instead. You can use the ref()
function to find out what kind of ref it really was. See perlref.
Not a subroutine reference
(F) Perl was trying to evaluate a reference to a code value (that is, a subroutine), but found a reference to something else instead.
You can use the ref() function to find out what kind of ref it really was. See also perlref.
Not a subroutine reference in overload table
(F) An attempt was made to specify an entry in an overloading table that doesn't somehow point to a valid subroutine. See overload.
Not enough arguments for %s
(F) The function requires more arguments than you specified.
Not enough format arguments
(W syntax) A format specified more picture fields than the next line supplied. See perlform.
%s: not found
(A) You've accidentally run your script through the Bourne shell instead of Perl. Check the #! line, or manually feed your script into
Perl yourself.
no UTC offset information; assuming local time is UTC
(S) A warning peculiar to VMS. Perl was unable to find the local timezone offset, so it's assuming that local system time is
equivalent to UTC. If it's not, define the logical name SYS$TIMEZONE_DIFFERENTIAL to translate to the number of seconds which need to
be added to UTC to get local time.
Non-octal character '%c'. Resolved as "%s"
(W digit) In parsing an octal numeric constant, a character was unexpectedly encountered that isn't octal. The resulting value is as
indicated.
Non-string passed as bitmask
(W misc) A number has been passed as a bitmask argument to select(). Use the vec() function to construct the file descriptor bitmasks
for select. See "select" in perlfunc.
Null filename used
(F) You can't require the null filename, especially because on many machines that means the current directory! See "require" in
perlfunc.
NULL OP IN RUN
(S debugging) Some internal routine called run() with a null opcode pointer.
Null picture in formline
(F) The first argument to formline must be a valid format picture specification. It was found to be empty, which probably means you
supplied it an uninitialized value. See perlform.
Null realloc
(P) An attempt was made to realloc NULL.
NULL regexp argument
(P) The internal pattern matching routines blew it big time.
NULL regexp parameter
(P) The internal pattern matching routines are out of their gourd.
Number too long
(F) Perl limits the representation of decimal numbers in programs to about 250 characters. You've exceeded that length. Future
versions of Perl are likely to eliminate this arbitrary limitation. In the meantime, try using scientific notation (e.g. "1e6" instead
of "1_000_000").
Number with no digits
(F) Perl was looking for a number but found nothing that looked like a number. This happens, for example with "o{}", with no number
between the braces.
Octal number > 037777777777 non-portable
(W portable) The octal number you specified is larger than 2**32-1(4294967295) and therefore non-portable between systems. See
perlport for more on portability concerns.
Odd number of arguments for overload::constant
(W overload) The call to overload::constant contained an odd number of arguments. The arguments should come in pairs.
Odd number of elements in anonymous hash
(W misc) You specified an odd number of elements to initialize a hash, which is odd, because hashes come in key/value pairs.
Odd number of elements in hash assignment
(W misc) You specified an odd number of elements to initialize a hash, which is odd, because hashes come in key/value pairs.
Offset outside string
(F)(W layer) You tried to do a read/write/send/recv/seek operation with an offset pointing outside the buffer. This is difficult to
imagine. The sole exceptions to this are that zero padding will take place when going past the end of the string when either
"sysread()"ing a file, or when seeking past the end of a scalar opened for I/O (in anticipation of future reads and to imitate the
behaviour with real files).
%s() on unopened %s
(W unopened) An I/O operation was attempted on a filehandle that was never initialized. You need to do an open(), a sysopen(), or a
socket() call, or call a constructor from the FileHandle package.
-%s on unopened filehandle %s
(W unopened) You tried to invoke a file test operator on a filehandle that isn't open. Check your control flow. See also "-X" in
perlfunc.
oops: oopsAV
(S internal) An internal warning that the grammar is screwed up.
oops: oopsHV
(S internal) An internal warning that the grammar is screwed up.
Opening dirhandle %s also as a file
(W io, deprecated) You used open() to associate a filehandle to a symbol (glob or scalar) that already holds a dirhandle. Although
legal, this idiom might render your code confusing and is deprecated.
Opening filehandle %s also as a directory
(W io, deprecated) You used opendir() to associate a dirhandle to a symbol (glob or scalar) that already holds a filehandle. Although
legal, this idiom might render your code confusing and is deprecated.
Operation "%s": no method found, %s
(F) An attempt was made to perform an overloaded operation for which no handler was defined. While some handlers can be autogenerated
in terms of other handlers, there is no default handler for any operation, unless the "fallback" overloading key is specified to be
true. See overload.
Operation "%s" returns its argument for non-Unicode code point 0x%X
(W utf8, non_unicode) You performed an operation requiring Unicode semantics on a code point that is not in Unicode, so what it should
do is not defined. Perl has chosen to have it do nothing, and warn you.
If the operation shown is "ToFold", it means that case-insensitive matching in a regular expression was done on the code point.
If you know what you are doing you can turn off this warning by "no warnings 'non_unicode';".
Operation "%s" returns its argument for UTF-16 surrogate U+%X
(W utf8, surrogate) You performed an operation requiring Unicode semantics on a Unicode surrogate. Unicode frowns upon the use of
surrogates for anything but storing strings in UTF-16, but semantics are (reluctantly) defined for the surrogates, and they are to do
nothing for this operation. Because the use of surrogates can be dangerous, Perl warns.
If the operation shown is "ToFold", it means that case-insensitive matching in a regular expression was done on the code point.
If you know what you are doing you can turn off this warning by "no warnings 'surrogate';".
Operator or semicolon missing before %s
(S ambiguous) You used a variable or subroutine call where the parser was expecting an operator. The parser has assumed you really
meant to use an operator, but this is highly likely to be incorrect. For example, if you say "*foo *foo" it will be interpreted as if
you said "*foo * 'foo'".
"our" variable %s redeclared
(W misc) You seem to have already declared the same global once before in the current lexical scope.
Out of memory!
(X) The malloc() function returned 0, indicating there was insufficient remaining memory (or virtual memory) to satisfy the request.
Perl has no option but to exit immediately.
At least in Unix you may be able to get past this by increasing your process datasize limits: in csh/tcsh use "limit" and "limit
datasize n" (where "n" is the number of kilobytes) to check the current limits and change them, and in ksh/bash/zsh use "ulimit -a" and
"ulimit -d n", respectively.
Out of memory during %s extend
(X) An attempt was made to extend an array, a list, or a string beyond the largest possible memory allocation.
Out of memory during "large" request for %s
(F) The malloc() function returned 0, indicating there was insufficient remaining memory (or virtual memory) to satisfy the request.
However, the request was judged large enough (compile-time default is 64K), so a possibility to shut down by trapping this error is
granted.
Out of memory during request for %s
(X)(F) The malloc() function returned 0, indicating there was insufficient remaining memory (or virtual memory) to satisfy the request.
The request was judged to be small, so the possibility to trap it depends on the way perl was compiled. By default it is not
trappable. However, if compiled for this, Perl may use the contents of $^M as an emergency pool after die()ing with this message. In
this case the error is trappable once, and the error message will include the line and file where the failed request happened.
Out of memory during ridiculously large request
(F) You can't allocate more than 2^31+"small amount" bytes. This error is most likely to be caused by a typo in the Perl program.
e.g., $arr[time] instead of $arr[$time].
Out of memory for yacc stack
(F) The yacc parser wanted to grow its stack so it could continue parsing, but realloc() wouldn't give it more memory, virtual or
otherwise.
'.' outside of string in pack
(F) The argument to a '.' in your template tried to move the working position to before the start of the packed string being built.
'@' outside of string in unpack
(F) You had a template that specified an absolute position outside the string being unpacked. See "pack" in perlfunc.
'@' outside of string with malformed UTF-8 in unpack
(F) You had a template that specified an absolute position outside the string being unpacked. The string being unpacked was also
invalid UTF-8. See "pack" in perlfunc.
overload arg '%s' is invalid
(W overload) The overload pragma was passed an argument it did not recognize. Did you mistype an operator?
Overloaded dereference did not return a reference
(F) An object with an overloaded dereference operator was dereferenced, but the overloaded operation did not return a reference. See
overload.
Overloaded qr did not return a REGEXP
(F) An object with a "qr" overload was used as part of a match, but the overloaded operation didn't return a compiled regexp. See
overload.
%s package attribute may clash with future reserved word: %s
(W reserved) A lowercase attribute name was used that had a package-specific handler. That name might have a meaning to Perl itself
some day, even though it doesn't yet. Perhaps you should use a mixed-case attribute name, instead. See attributes.
pack/unpack repeat count overflow
(F) You can't specify a repeat count so large that it overflows your signed integers. See "pack" in perlfunc.
page overflow
(W io) A single call to write() produced more lines than can fit on a page. See perlform.
panic: %s
(P) An internal error.
panic: attempt to call %s in %s
(P) One of the file test operators entered a code branch that calls an ACL related-function, but that function is not available on this
platform. Earlier checks mean that it should not be possible to enter this branch on this platform.
panic: ck_grep, type=%u
(P) Failed an internal consistency check trying to compile a grep.
panic: ck_split, type=%u
(P) Failed an internal consistency check trying to compile a split.
panic: corrupt saved stack index %ld
(P) The savestack was requested to restore more localized values than there are in the savestack.
panic: del_backref
(P) Failed an internal consistency check while trying to reset a weak reference.
panic: die %s
(P) We popped the context stack to an eval context, and then discovered it wasn't an eval context.
panic: do_subst
(P) The internal pp_subst() routine was called with invalid operational data.
panic: do_trans_%s
(P) The internal do_trans routines were called with invalid operational data.
panic: fold_constants JMPENV_PUSH returned %d
(P) While attempting folding constants an exception other than an "eval" failure was caught.
panic: frexp
(P) The library function frexp() failed, making printf("%f") impossible.
panic: goto, type=%u, ix=%ld
(P) We popped the context stack to a context with the specified label, and then discovered it wasn't a context we know how to do a goto
in.
panic: gp_free failed to free glob pointer
(P) The internal routine used to clear a typeglob's entries tried repeatedly, but each time something re-created entries in the glob.
Most likely the glob contains an object with a reference back to the glob and a destructor that adds a new object to the glob.
panic: INTERPCASEMOD, %s
(P) The lexer got into a bad state at a case modifier.
panic: INTERPCONCAT, %s
(P) The lexer got into a bad state parsing a string with brackets.
panic: kid popen errno read
(F) forked child returned an incomprehensible message about its errno.
panic: last, type=%u
(P) We popped the context stack to a block context, and then discovered it wasn't a block context.
panic: leave_scope clearsv
(P) A writable lexical variable became read-only somehow within the scope.
panic: leave_scope inconsistency %u
(P) The savestack probably got out of sync. At least, there was an invalid enum on the top of it.
panic: magic_killbackrefs
(P) Failed an internal consistency check while trying to reset all weak references to an object.
panic: malloc, %s
(P) Something requested a negative number of bytes of malloc.
panic: memory wrap
(P) Something tried to allocate more memory than possible.
panic: pad_alloc, %p!=%p
(P) The compiler got confused about which scratch pad it was allocating and freeing temporaries and lexicals from.
panic: pad_free curpad, %p!=%p
(P) The compiler got confused about which scratch pad it was allocating and freeing temporaries and lexicals from.
panic: pad_free po
(P) An invalid scratch pad offset was detected internally.
panic: pad_reset curpad, %p!=%p
(P) The compiler got confused about which scratch pad it was allocating and freeing temporaries and lexicals from.
panic: pad_sv po
(P) An invalid scratch pad offset was detected internally.
panic: pad_swipe curpad, %p!=%p
(P) The compiler got confused about which scratch pad it was allocating and freeing temporaries and lexicals from.
panic: pad_swipe po
(P) An invalid scratch pad offset was detected internally.
panic: pp_iter, type=%u
(P) The foreach iterator got called in a non-loop context frame.
panic: pp_match%s
(P) The internal pp_match() routine was called with invalid operational data.
panic: pp_split, pm=%p, s=%p
(P) Something terrible went wrong in setting up for the split.
panic: realloc, %s
(P) Something requested a negative number of bytes of realloc.
panic: reference miscount on nsv in sv_replace() (%d != 1)
(P) The internal sv_replace() function was handed a new SV with a reference count other than 1.
panic: restartop in %s
(P) Some internal routine requested a goto (or something like it), and didn't supply the destination.
panic: return, type=%u
(P) We popped the context stack to a subroutine or eval context, and then discovered it wasn't a subroutine or eval context.
panic: scan_num, %s
(P) scan_num() got called on something that wasn't a number.
panic: sv_chop %s
(P) The sv_chop() routine was passed a position that is not within the scalar's string buffer.
panic: sv_insert, midend=%p, bigend=%p
(P) The sv_insert() routine was told to remove more string than there was string.
panic: strxfrm() gets absurd - a => %u, ab => %u
(P) The interpreter's sanity check of the C function strxfrm() failed. In your current locale the returned transformation of the
string "ab" is shorter than that of the string "a", which makes no sense.
panic: top_env
(P) The compiler attempted to do a goto, or something weird like that.
panic: unimplemented op %s (#%d) called
(P) The compiler is screwed up and attempted to use an op that isn't permitted at run time.
panic: utf16_to_utf8: odd bytelen
(P) Something tried to call utf16_to_utf8 with an odd (as opposed to even) byte length.
panic: utf16_to_utf8_reversed: odd bytelen
(P) Something tried to call utf16_to_utf8_reversed with an odd (as opposed to even) byte length.
panic: yylex, %s
(P) The lexer got into a bad state while processing a case modifier.
Parsing code internal error (%s)
(F) Parsing code supplied by an extension violated the parser's API in a detectable way.
Pattern subroutine nesting without pos change exceeded limit in regex; marked by <-- HERE in m/%s/
(F) You used a pattern that uses too many nested subpattern calls without consuming any text. Restructure the pattern so text is
consumed before the nesting limit is exceeded.
The <-- HERE shows in the regular expression about where the problem was discovered.
Parentheses missing around "%s" list
(W parenthesis) You said something like
my $foo, $bar = @_;
when you meant
my ($foo, $bar) = @_;
Remember that "my", "our", "local" and "state" bind tighter than comma.
"-p" destination: %s
(F) An error occurred during the implicit output invoked by the "-p" command-line switch. (This output goes to STDOUT unless you've
redirected it with select().)
(perhaps you forgot to load "%s"?)
(F) This is an educated guess made in conjunction with the message "Can't locate object method "%s" via package "%s"". It often
means that a method requires a package that has not been loaded.
Perl folding rules are not up-to-date for 0x%x; please use the perlbug utility to report
(W regex, deprecated) You used a regular expression with case-insensitive matching, and there is a bug in Perl in which the built-in
regular expression folding rules are not accurate. This may lead to incorrect results. Please report this as a bug using the
"perlbug" utility. (This message is marked deprecated, so that it by default will be turned-on.)
Perl_my_%s() not available
(F) Your platform has very uncommon byte-order and integer size, so it was not possible to set up some or all fixed-width byte-order
conversion functions. This is only a problem when you're using the '<' or '>' modifiers in (un)pack templates. See "pack" in
perlfunc.
Perl %s required (did you mean %s?)--this is only %s, stopped
(F) The code you are trying to run has asked for a newer version of Perl than you are running. Perhaps "use 5.10" was written instead
of "use 5.010" or "use v5.10". Without the leading "v", the number is interpreted as a decimal, with every three digits after the
decimal point representing a part of the version number. So 5.10 is equivalent to v5.100.
Perl %s required--this is only version %s, stopped
(F) The module in question uses features of a version of Perl more recent than the currently running version. How long has it been
since you upgraded, anyway? See "require" in perlfunc.
PERL_SH_DIR too long
(F) An error peculiar to OS/2. PERL_SH_DIR is the directory to find the "sh"-shell in. See "PERL_SH_DIR" in perlos2.
PERL_SIGNALS illegal: "%s"
See "PERL_SIGNALS" in perlrun for legal values.
Perls since %s too modern--this is %s, stopped
(F) The code you are trying to run claims it will not run on the version of Perl you are using because it is too new. Maybe the code
needs to be updated, or maybe it is simply wrong and the version check should just be removed.
perl: warning: Setting locale failed.
(S) The whole warning message will look something like:
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LC_ALL = "En_US",
LANG = (unset)
are supported and installed on your system.
perl: warning: Falling back to the standard locale ("C").
Exactly what were the failed locale settings varies. In the above the settings were that the LC_ALL was "En_US" and the LANG had no
value. This error means that Perl detected that you and/or your operating system supplier and/or system administrator have set up the
so-called locale system but Perl could not use those settings. This was not dead serious, fortunately: there is a "default locale"
called "C" that Perl can and will use, and the script will be run. Before you really fix the problem, however, you will get the same
error message each time you run Perl. How to really fix the problem can be found in perllocale section LOCALE PROBLEMS.
pid %x not a child
(W exec) A warning peculiar to VMS. Waitpid() was asked to wait for a process which isn't a subprocess of the current process. While
this is fine from VMS' perspective, it's probably not what you intended.
'P' must have an explicit size in unpack
(F) The unpack format P must have an explicit size, not "*".
POSIX class [:%s:] unknown in regex; marked by <-- HERE in m/%s/
(F) The class in the character class [: :] syntax is unknown. The <-- HERE shows in the regular expression about where the problem was
discovered. Note that the POSIX character classes do not have the "is" prefix the corresponding C interfaces have: in other words,
it's "[[:print:]]", not "isprint". See perlre.
POSIX getpgrp can't take an argument
(F) Your system has POSIX getpgrp(), which takes no argument, unlike the BSD version, which takes a pid.
POSIX syntax [%s] belongs inside character classes in regex; marked by <-- HERE in m/%s/
(W regexp) The character class constructs [: :], [= =], and [. .] go inside character classes, the [] are part of the construct, for
example: /[012[:alpha:]345]/. Note that [= =] and [. .] are not currently implemented; they are simply placeholders for future
extensions and will cause fatal errors. The <-- HERE shows in the regular expression about where the problem was discovered. See
perlre.
POSIX syntax [. .] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
(F regexp) Within regular expression character classes ([]) the syntax beginning with "[." and ending with ".]" is reserved for future
extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square
brackets with the backslash: "[." and ".]". The <-- HERE shows in the regular expression about where the problem was discovered.
See perlre.
POSIX syntax [= =] is reserved for future extensions in regex; marked by <-- HERE in m/%s/
(F) Within regular expression character classes ([]) the syntax beginning with "[=" and ending with "=]" is reserved for future
extensions. If you need to represent those character sequences inside a regular expression character class, just quote the square
brackets with the backslash: "[=" and "=]". The <-- HERE shows in the regular expression about where the problem was discovered.
See perlre.
Possible attempt to put comments in qw() list
(W qw) qw() lists contain items separated by whitespace; as with literal strings, comment characters are not ignored, but are instead
treated as literal data. (You may have used different delimiters than the parentheses shown here; braces are also frequently used.)
You probably wrote something like this:
@list = qw(
a # a comment
b # another comment
);
when you should have written this:
@list = qw(
a
b
);
If you really want comments, build your list the old-fashioned way, with quotes and commas:
@list = (
'a', # a comment
'b', # another comment
);
Possible attempt to separate words with commas
(W qw) qw() lists contain items separated by whitespace; therefore commas aren't needed to separate the items. (You may have used
different delimiters than the parentheses shown here; braces are also frequently used.)
You probably wrote something like this:
qw! a, b, c !;
which puts literal commas into some of the list items. Write it without commas if you don't want them to appear in your data:
qw! a b c !;
Possible memory corruption: %s overflowed 3rd argument
(F) An ioctl() or fcntl() returned more than Perl was bargaining for. Perl guesses a reasonable buffer size, but puts a sentinel byte
at the end of the buffer just in case. This sentinel byte got clobbered, and Perl assumes that memory is now corrupted. See "ioctl"
in perlfunc.
Possible precedence problem on bitwise %c operator
(W precedence) Your program uses a bitwise logical operator in conjunction with a numeric comparison operator, like this :
if ($x & $y == 0) { ... }
This expression is actually equivalent to "$x & ($y == 0)", due to the higher precedence of "==". This is probably not what you want.
(If you really meant to write this, disable the warning, or, better, put the parentheses explicitly and write "$x & ($y == 0)").
Possible unintended interpolation of $ in regex
(W ambiguous) You said something like "m/$/" in a regex. The regex "m/foo$s+bar/m" translates to: match the word 'foo', the output
record separator (see "$" in perlvar) and the letter 's' (one time or more) followed by the word 'bar'.
If this is what you intended then you can silence the warning by using "m/${}/" (for example: "m/foo${}s+bar/").
If instead you intended to match the word 'foo' at the end of the line followed by whitespace and the word 'bar' on the next line then
you can use "m/$(?)/" (for example: "m/foo$(?)s+bar/").
Possible unintended interpolation of %s in string
(W ambiguous) You said something like '@foo' in a double-quoted string but there was no array @foo in scope at the time. If you wanted
a literal @foo, then write it as @foo; otherwise find out what happened to the array you apparently lost track of.
Precedence problem: open %s should be open(%s)
(S precedence) The old irregular construct
open FOO || die;
is now misinterpreted as
open(FOO || die);
because of the strict regularization of Perl 5's grammar into unary and list operators. (The old open was a little of both.) You must
put parentheses around the filehandle, or use the new "or" operator instead of "||".
Premature end of script headers
See Server error.
printf() on closed filehandle %s
(W closed) The filehandle you're writing to got itself closed sometime before now. Check your control flow.
print() on closed filehandle %s
(W closed) The filehandle you're printing on got itself closed sometime before now. Check your control flow.
Process terminated by SIG%s
(W) This is a standard message issued by OS/2 applications, while *nix applications die in silence. It is considered a feature of the
OS/2 port. One can easily disable this by appropriate sighandlers, see "Signals" in perlipc. See also "Process terminated by
SIGTERM/SIGINT" in perlos2.
Prototype after '%c' for %s : %s
(W illegalproto) A character follows % or @ in a prototype. This is useless, since % and @ gobble the rest of the subroutine
arguments.
Prototype mismatch: %s vs %s
(S prototype) The subroutine being declared or defined had previously been declared or defined with a different function prototype.
Prototype not terminated
(F) You've omitted the closing parenthesis in a function prototype definition.
p{} uses Unicode rules, not locale rules
(W) You compiled a regular expression that contained a Unicode property match ("p" or "P"), but the regular expression is also being
told to use the run-time locale, not Unicode. Instead, use a POSIX character class, which should know about the locale's rules. (See
"POSIX Character Classes" in perlrecharclass.)
Even if the run-time locale is ISO 8859-1 (Latin1), which is a subset of Unicode, some properties will give results that are not valid
for that subset.
Here are a couple of examples to help you see what's going on. If the locale is ISO 8859-7, the character at code point 0xD7 is the
"GREEK CAPITAL LETTER CHI". But in Unicode that code point means the "MULTIPLICATION SIGN" instead, and "p" always uses the Unicode
meaning. That means that "p{Alpha}" won't match, but "[[:alpha:]]" should. Only in the Latin1 locale are all the characters in the
same positions as they are in Unicode. But, even here, some properties give incorrect results. An example is
"p{Changes_When_Uppercased}" which is true for "LATIN SMALL LETTER Y WITH DIAERESIS", but since the upper case of that character is
not in Latin1, in that locale it doesn't change when upper cased.
Quantifier follows nothing in regex; marked by <-- HERE in m/%s/
(F) You started a regular expression with a quantifier. Backslash it if you meant it literally. The <-- HERE shows in the regular
expression about where the problem was discovered. See perlre.
Quantifier in {,} bigger than %d in regex; marked by <-- HERE in m/%s/
(F) There is currently a limit to the size of the min and max values of the {min,max} construct. The <-- HERE shows in the regular
expression about where the problem was discovered. See perlre.
Quantifier unexpected on zero-length expression; marked by <-- HERE in m/%s/
(W regexp) You applied a regular expression quantifier in a place where it makes no sense, such as on a zero-width assertion. Try
putting the quantifier inside the assertion instead. For example, the way to match "abc" provided that it is followed by three
repetitions of "xyz" is "/abc(?=(?:xyz){3})/", not "/abc(?=xyz){3}/".
The <-- HERE shows in the regular expression about where the problem was discovered.
Range iterator outside integer range
(F) One (or both) of the numeric arguments to the range operator ".." are outside the range which can be represented by integers
internally. One possible workaround is to force Perl to use magical string increment by prepending "0" to your numbers.
readdir() attempted on invalid dirhandle %s
(W io) The dirhandle you're reading from is either closed or not really a dirhandle. Check your control flow.
readline() on closed filehandle %s
(W closed) The filehandle you're reading from got itself closed sometime before now. Check your control flow.
read() on closed filehandle %s
(W closed) You tried to read from a closed filehandle.
read() on unopened filehandle %s
(W unopened) You tried to read from a filehandle that was never opened.
Reallocation too large: %x
(F) You can't allocate more than 64K on an MS-DOS machine.
realloc() of freed memory ignored
(S malloc) An internal routine called realloc() on something that had already been freed.
Recompile perl with -DDEBUGGING to use -D switch
(F debugging) You can't use the -D option unless the code to produce the desired output is compiled into Perl, which entails some
overhead, which is why it's currently left out of your copy.
Recursive call to Perl_load_module in PerlIO_find_layer
(P) It is currently not permitted to load modules when creating a filehandle inside an %INC hook. This can happen with "open my $fh,
'<', $scalar", which implicitly loads PerlIO::scalar. Try loading PerlIO::scalar explicitly first.
Recursive inheritance detected in package '%s'
(F) While calculating the method resolution order (MRO) of a package, Perl believes it found an infinite loop in the @ISA hierarchy.
This is a crude check that bails out after 100 levels of @ISA depth.
refcnt_dec: fd %d%s
refcnt: fd %d%s
refcnt_inc: fd %d%s
(P) Perl's I/O implementation failed an internal consistency check. If you see this message, something is very wrong.
Reference found where even-sized list expected
(W misc) You gave a single reference where Perl was expecting a list with an even number of elements (for assignment to a hash). This
usually means that you used the anon hash constructor when you meant to use parens. In any case, a hash requires key/value pairs.
%hash = { one => 1, two => 2, }; # WRONG
%hash = [ qw/ an anon array / ]; # WRONG
%hash = ( one => 1, two => 2, ); # right
%hash = qw( one 1 two 2 ); # also fine
Reference is already weak
(W misc) You have attempted to weaken a reference that is already weak. Doing so has no effect.
Reference to invalid group 0
(F) You used "g0" or similar in a regular expression. You may refer to capturing parentheses only with strictly positive integers
(normal backreferences) or with strictly negative integers (relative backreferences). Using 0 does not make sense.
Reference to nonexistent group in regex; marked by <-- HERE in m/%s/
(F) You used something like "7" in your regular expression, but there are not at least seven sets of capturing parentheses in the
expression. If you wanted to have the character with ordinal 7 inserted into the regular expression, prepend zeroes to make it three
digits long: "