repquota(8) [osf1 man page]
repquota(8) System Manager's Manual repquota(8) NAME
repquota - summarizes file system quotas SYNOPSIS
/usr/sbin/repquota [-guv] file_spec ... /usr/sbin/repquota -a [-guv] PARAMETERS
Specifies one or more file systems. Specify any file system by entering its full path name or its mount point. The full path name is the name entered in the file_spec field of the file system's entry in the /etc/fstab file. The mount point is the name entered in the mnt_point field of the file system's entry in the /etc/fstab file. For UFS file systems, you can alternatively enter the name of a block device special file. For example: /dev/disk/dsk3c. For AdvFS filesets, you can alternatively enter the name of a file domain, a pound sign (#), and the name of the fileset. For exam- ple: root_domain#root. FLAGS
Prints quotas for all the file systems listed in /etc/fstab. Prints group quotas only. Prints user quotas only. Prints a header line before the information for each file system. DESCRIPTION
The repquota command prints a summary of the disk usage and quotas for the specified file systems. The command provides a snapshot of the quota statistics, which may be inaccurate if there is current activity in the file system. To ensure that the satistics are accurate, run the command when there is no file system activity. To be included in the summary, each file system must have the userquota and groupquota entries in the /etc/fstab file . The following is an example of an entry in the etc/fstab file for the usr fileset: advfs_dmn#usr /usr advfs rw,userquota,groupquota By default, both user and group quota are displayed (if they exist). For each user or group, the current number of files and amount of space (in kilobytes) is printed, as well as quota limits established with the edquota command. repquota must be run by a user with superuser authority. NOTES
Disk quotas are displayed as 1 kilobyte blocks. The term file system represents either a UFS file system or and AdvFS fileset. RESTRICTIONS
You must be the root user to use the repquota command. FILES
Specifies the command path Contains user quotas for file systems Contains group quotas for file systems Contains fileset names and loca- tions RELATED INFORMATION
Commands: edquota(8), fsck(8), quota(1), quotacheck(8), quotaon(8). Functions: quotactl(2). Files: fstab(4). delim off repquota(8)
Check Out this Related Man Page
edquota(8) System Manager's Manual edquota(8) NAME
edquota - edits quotas SYNOPSIS
/usr/sbin/edquota [-gGuU] -t /usr/sbin/edquota [-p proto_username] [-u] username ... /usr/sbin/edquota [-P proto_userID] -U userID ... /usr/sbin/edquota [-P proto_userID] [-u] username ... /usr/sbin/edquota [-p proto_username] -U userID ... /usr/sbin/edquota [-p proto_groupname] -g groupname ... /usr/sbin/edquota [-P proto_groupID] -G groupID ... /usr/sbin/edquota [-P proto_groupID] -g groupname ... /usr/sbin/edquota [-p proto_groupname] -G groupID ... PARAMETERS
Specifies a prototypical user or group by the user name or group name. A prototypical user or group has previously-defined, valid quota files that you want to duplicate for other user or group quota files. Specifies a prototypical user or group by the user id or group id. A prototypical user or group has previously-defined, valid quota files that you want to duplicate for other user or group quota files. FLAGS
Edits the quotas of one or more groups, specified by groupname on the command line. When used with the -t flag, sets or changes the grace period for all file systems with group quotas specified in the /etc/fstab file. Edits the quotas of one or more groups, specified by groupID on the command line. When used with the -t flag, sets or changes the grace period for all file systems with group quotas specified in the /etc/fstab file. Initializes the specified quotas by duplicating the established quotas of the prototypical user's name (when used with the -u flag, the -U flag, or no other flags) or the prototypical group's name (when used with the -g or -G flags). The proto_username or proto_groupname must have a valid quota file. Establishing quotas for one user or group and then using the -p flag to duplicate these quotas for other users is the normal mechanism for initializing quotas for a group of users. Initializes the specified quotas by duplicat- ing the established quotas of the prototypical user's id (when used with the -U flag or the -u flag) or the prototypical group's id (when used with the -G flag or the -g flag). The proto_userID or proto_groupID must have a valid quota file. Establishing quotas for one user or group and then using the -P flag to duplicate these quotas for other users is the normal mechanism for initializing quotas for a group of users. Sets or changes the default grace period for which users may exceed their soft limits. By default, or when you specify -t with the -u flag, the grace period is set for all file systems with user quotas specified in the /etc/fstab file. When you specify -t with the -g flag, the grace period is set for all of the file systems with group quotas specified in the /etc/fstab file. Edits the quotas of one or more users, specified by username ... on the command line. The -u flag is the default. The -u flag, used with the -t flag, changes the grace period for all file systems with user quotas specified in the /etc/fstab file. Edits the quotas of one or more users, specified by userID ... on the command line. The -U flag used with the -t flag, changes the grace period for all file systems with user quotas speci- fied in the /etc/fstab file. DESCRIPTION
The edquota command is a quota editor that allows you to add and modify user and group quotas and modify file system quota grace periods. Use the quota command to display the existing quota information. Note that disk quotas are displayed as 1 kilobyte blocks. For each user or group specified, the edquota command creates a temporary file with an ASCII representation of the current quotas for that user or group, then invokes an editor to allow you to modify the file. The vi editor is invoked by default. To override the default, specify a different editor for the EDITOR environment variable in your login file. Setting a hard limit to 0 (zero) indicates that no quota should be imposed. Setting a hard limit to 1 (one) indicates that no allocations should be permitted. Setting a soft limit to 1 (one) with a hard limit of 0 (zero) indicates that allocations should be permitted on only a temporary basis (see the -t flag). The current usage information in the file is for informational purposes; only the hard and soft lim- its can be changed. For each file system, the edquota command creates a temporary file with an ASCII representation of the current grace period for that user or group, then invokes an editor to allow you to modify the grace period. The grace period may be specified in days, hours, minutes, or seconds. Setting a grace period to 0 (zero) indicates that the default grace period should be imposed. Setting a grace period to 1 second indicates that no grace period should be granted. When you exit the editor, edquota reads the temporary file and modifies the quota.user and quota.group files for the target file system to reflect the changes made. Changes in grace periods take effect immediately unless a grace period is currently in effect. For example, assume a user exceeds a soft limit and receives a grace period of 7 days. A subsequent change to a grace period of 1 day will not affect the user's already-invoked grace period, unless the user drops below the soft limit and exceeds it once again. The default grace period for a file system is speci- fied in the quota.user and quota.group files for the target file system. RESTRICTIONS
You can use the edquota command to edit only those file systems that are in the /etc/fstab file and have userquota and groupquota entries. You must be the root user to edit quotas. NOTES
The term file system represents either a UFS file system or an AdvFS fileset. The root user can exceed user and group quotas. The fileset grace period is equal to the group grace period. When you use the edquota command to set the group grace period for a fileset causes that same value to be used for the fileset grace period. EXAMPLES
To apply the existing quotas of the user named user1 to the user named user2: /usr/sbin/edquota -p user1 -u user2 To apply the existing quotas of the user named user1 to the user named user2, using the default: /usr/sbin/edquota -p user1 user2 To apply the existing quotas of the user with the user id 361 to the user with the user id 382: /usr/sbin/edquota -P 361 -U 382 To apply the existing quotas of the user named user1 to the user with the user id 382: /usr/sbin/edquota -p user1 -U 382 FILES
Specifies the command path Contains user quotas for file systems Contains group quotas for file systems Contains file system names and locations RELATED INFORMATION
quota(1), quotacheck(8), quotaon(8), quotactl(2), fstab(4). delim off edquota(8)