sys_attrs_isa(5) [osf1 man page]

sys_attrs_isa(5)						File Formats Manual						  sys_attrs_isa(5)

NAME

       sys_attrs_isa - isa subsystem attributes

DESCRIPTION

       This  reference page lists and describes attributes for the ISA Bus (isa) kernel subsystem. Refer to the sys_attrs(5) reference page for an
       introduction to the topic of kernel subsystem attributes.

       For this subsytem, users should modify only the following attribute and do so only for the purpose described. Any other visible	attributes
       cannot or should not be modified.

	      Enables  (1)  or disables (0) console messages that are used by driver developers to collect information about a configuration prob-
	      lem. A developer can set this attribute by using the sysconfig or sysconfigdb utility. See sysconfig(8),	sysconfigdb(8),  and  cfg-
	      mgr(8) for more information on options for modifying attributes and reconfiguring a kernel subsystem.

	      Default value: 0

SEE ALSO

       Commands: cfgmgr(8), sysconfig(8), sysconfigdb(8)

       Files: stanza(4), cfgmgr.auth(4), sysconfigtab(4)

       Others: sys_attrs(5)

       Writing EISA and ISA Bus Device Drivers

																  sys_attrs_isa(5)

sys_attrs_pci(5)						File Formats Manual						  sys_attrs_pci(5)

NAME

       sys_attrs_pci - pci subsystem attributes

DESCRIPTION

       This  reference	page  lists  and  describes attributes for the PCI (pci) kernel subsystem. Refer to the sys_attrs(5) reference page for an
       introduction to the topic of kernel subsystem attributes.

       For this subsytem, users should modify only the following attribute and do so only for the purpose described. Any other visible	attributes
       cannot or should not be modified.

	      A  bit-mask  setting that allows the developer of PCI hardware and softwareto determine the PCI configuration parameters on an Alpha
	      system based on the PCI bus. By setting PCI_Developer_Debug to different values, a variety of hardware-related  or  software-related
	      information about all PCI devices on an AlphaServer are printed out at system bootstrap time. If loadable drivers are used, loadable
	      configuration data is also printed out on execution of the sysconfig -c command.

	      Refer to the /usr/include/io/dec/pci/pci_debug.h file for valid bit-field settings for this attribute.  The  pci_debug.h	file  con-
	      tains  macro definitions that state the type of information that is printed out if PCI_Developer_Debug is set to a particular value.
	      Any combination of the bit-flags is valid.  For example, the value 0x70 allows the hardware or software developer  to  see  the  PCI
	      configuration header information that the kernel reads or assigns to PCI devices.

	      Default value: 0

	      Minimum value: 0

	      Maximum value: FFFFFFFF(16)

SEE ALSO

       sys_attrs(5)

       Writing PCI Bus Device Drivers

																  sys_attrs_pci(5)