ATOMIC(9) BSD Kernel Developer's Manual ATOMIC(9)
NAME
atomic_add, atomic_clear, atomic_cmpset, atomic_fetchadd, atomic_load, atomic_readandclear, atomic_set, atomic_subtract, atomic_store --
atomic operations
SYNOPSIS
#include <sys/types.h>
#include <machine/atomic.h>
void
atomic_add_[acq_|rel_]<type>(volatile <type> *p, <type> v);
void
atomic_clear_[acq_|rel_]<type>(volatile <type> *p, <type> v);
int
atomic_cmpset_[acq_|rel_]<type>(volatile <type> *dst, <type> old, <type> new);
<type>
atomic_fetchadd_<type>(volatile <type> *p, <type> v);
<type>
atomic_load_acq_<type>(volatile <type> *p);
<type>
atomic_readandclear_<type>(volatile <type> *p);
void
atomic_set_[acq_|rel_]<type>(volatile <type> *p, <type> v);
void
atomic_subtract_[acq_|rel_]<type>(volatile <type> *p, <type> v);
void
atomic_store_rel_<type>(volatile <type> *p, <type> v);
DESCRIPTION
Each of the atomic operations is guaranteed to be atomic in the presence of interrupts. They can be used to implement reference counts or as
building blocks for more advanced synchronization primitives such as mutexes.
Types
Each atomic operation operates on a specific type. The type to use is indicated in the function name. The available types that can be used
are:
int unsigned integer
long unsigned long integer
ptr unsigned integer the size of a pointer
32 unsigned 32-bit integer
64 unsigned 64-bit integer
For example, the function to atomically add two integers is called atomic_add_int().
Certain architectures also provide operations for types smaller than ``int''.
char unsigned character
short unsigned short integer
8 unsigned 8-bit integer
16 unsigned 16-bit integer
These must not be used in MI code because the instructions to implement them efficiently may not be available.
Memory Barriers
Memory barriers are used to guarantee the order of data accesses in two ways. First, they specify hints to the compiler to not re-order or
optimize the operations. Second, on architectures that do not guarantee ordered data accesses, special instructions or special variants of
instructions are used to indicate to the processor that data accesses need to occur in a certain order. As a result, most of the atomic
operations have three variants in order to include optional memory barriers. The first form just performs the operation without any explicit
barriers. The second form uses a read memory barrier, and the third variant uses a write memory barrier.
The second variant of each operation includes a read memory barrier. This barrier ensures that the effects of this operation are completed
before the effects of any later data accesses. As a result, the operation is said to have acquire semantics as it acquires a pseudo-lock
requiring further operations to wait until it has completed. To denote this, the suffix ``_acq'' is inserted into the function name immedi-
ately prior to the ``_<type>'' suffix. For example, to subtract two integers ensuring that any later writes will happen after the subtrac-
tion is performed, use atomic_subtract_acq_int().
The third variant of each operation includes a write memory barrier. This ensures that all effects of all previous data accesses are com-
pleted before this operation takes place. As a result, the operation is said to have release semantics as it releases any pending data
accesses to be completed before its operation is performed. To denote this, the suffix ``_rel'' is inserted into the function name immedi-
ately prior to the ``_<type>'' suffix. For example, to add two long integers ensuring that all previous writes will happen first, use
atomic_add_rel_long().
A practical example of using memory barriers is to ensure that data accesses that are protected by a lock are all performed while the lock is
held. To achieve this, one would use a read barrier when acquiring the lock to guarantee that the lock is held before any protected opera-
tions are performed. Finally, one would use a write barrier when releasing the lock to ensure that all of the protected operations are com-
pleted before the lock is released.
Multiple Processors
The current set of atomic operations do not necessarily guarantee atomicity across multiple processors. To guarantee atomicity across pro-
cessors, not only does the individual operation need to be atomic on the processor performing the operation, but the result of the operation
needs to be pushed out to stable storage and the caches of all other processors on the system need to invalidate any cache lines that include
the affected memory region. On the i386 architecture, the cache coherency model requires that the hardware perform this task, thus the
atomic operations are atomic across multiple processors. On the ia64 architecture, coherency is only guaranteed for pages that are config-
ured to using a caching policy of either uncached or write back.
Semantics
This section describes the semantics of each operation using a C like notation.
atomic_add(p, v)
*p += v;
atomic_clear(p, v)
*p &= ~v;
atomic_cmpset(dst, old, new)
if (*dst == old) {
*dst = new;
return 1;
} else
return 0;
The atomic_cmpset() functions are not implemented for the types ``char'', ``short'', ``8'', and ``16''.
atomic_fetchadd(p, v)
tmp = *p;
*p += v;
return tmp;
The atomic_fetchadd() functions are only implemented for the types ``int'', ``long'' and ``32'' and do not have any variants with memory bar-
riers at this time.
atomic_load(addr)
return (*addr)
The atomic_load() functions are only provided with acquire memory barriers.
atomic_readandclear(addr)
temp = *addr;
*addr = 0;
return (temp);
The atomic_readandclear() functions are not implemented for the types ``char'', ``short'', ``ptr'', ``8'', and ``16'' and do not have any
variants with memory barriers at this time.
atomic_set(p, v)
*p |= v;
atomic_subtract(p, v)
*p -= v;
atomic_store(p, v)
*p = v;
The atomic_store() functions are only provided with release memory barriers.
The type ``64'' is currently not implemented for any of the atomic operations on the arm, i386, and powerpc architectures.
RETURN VALUES
The atomic_cmpset() function returns the result of the compare operation. The atomic_fetchadd(), atomic_load(), and atomic_readandclear()
functions return the value at the specified address.
EXAMPLES
This example uses the atomic_cmpset_acq_ptr() and atomic_set_ptr() functions to obtain a sleep mutex and handle recursion. Since the
mtx_lock member of a struct mtx is a pointer, the ``ptr'' type is used.
/* Try to obtain mtx_lock once. */
#define _obtain_lock(mp, tid)
atomic_cmpset_acq_ptr(&(mp)->mtx_lock, MTX_UNOWNED, (tid))
/* Get a sleep lock, deal with recursion inline. */
#define _get_sleep_lock(mp, tid, opts, file, line) do {
uintptr_t _tid = (uintptr_t)(tid);
if (!_obtain_lock(mp, tid)) {
if (((mp)->mtx_lock & MTX_FLAGMASK) != _tid)
_mtx_lock_sleep((mp), _tid, (opts), (file), (line));
else {
atomic_set_ptr(&(mp)->mtx_lock, MTX_RECURSE);
(mp)->mtx_recurse++;
}
}
} while (0)
HISTORY
The atomic_add(), atomic_clear(), atomic_set(), and atomic_subtract() operations were first introduced in FreeBSD 3.0. This first set only
supported the types ``char'', ``short'', ``int'', and ``long''. The atomic_cmpset(), atomic_load(), atomic_readandclear(), and
atomic_store() operations were added in FreeBSD 5.0. The types ``8'', ``16'', ``32'', ``64'', and ``ptr'' and all of the acquire and release
variants were added in FreeBSD 5.0 as well. The atomic_fetchadd() operations were added in FreeBSD 6.0.
BSD
September 27, 2005 BSD