Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

wbsd(7d) [opensolaris man page]

wbsd(7D)							      Devices								  wbsd(7D)

wbsd - Winbond W83L519D Secure Digital slot driver SYNOPSIS
pciclass,080500@unit-address pciclass,080501@unit-address DESCRIPTION
The wbsd driver supports Secure Digital (SD) media slots found on Tadpole SPARCLE, Tadpole Viper and Sun Ultra 3 mobile SPARC workstations. FILES
Memory card device files are created by the sdcard(7D) driver. An attachment point device file is created for each physical slot on the system: /dev/sdcardx/y Attachment point for slot y on controller x. Typically this is named /dev/sdcard0/0. /kernel/misc/sparcv9/sdhost 64-bit ELF kernel module (SPARC). ATTRIBUTES
See attributes(5) for a description of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |SPARC | +-----------------------------+-----------------------------+ |Availability |SUNWwbsd | +-----------------------------+-----------------------------+ SEE ALSO
cfgadm_sdcard(1M), attributes(5), sda(7D), sdcard(7D) System Administration Guide, Volume I System Administration Guide: Basic Administration SunOS 5.11 28 Feb 2008 wbsd(7D)

Check Out this Related Man Page

usb_mid(7D)							      Devices							       usb_mid(7D)

usb_mid - USB Multi Interface Driver SYNOPSIS
device@unit-address DESCRIPTION
The usb_mid driver is a USBA (Solaris Universal Serial Bus Architecture) compliant nexus driver that binds to device level nodes of a com- posite (multi interface) device if no vendor or class specific driver is available. The usb_mid driver attempts to bind drivers to each of the composite device's interfaces. FILES
/kernel/drv/usb_mid 32-bit x86 ELF kernel module /kernel/drv/amd64/usb_mid 64-bit x86 ELF kernel module /kernel/drv/sparcv9/usb_mid 64-bit SPARC ELF kernel module ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+------------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+------------------------------+ |Architecture |SPARC, x86, PCI-based systems | +-----------------------------+------------------------------+ |Availability |SUNWusb | +-----------------------------+------------------------------+ SEE ALSO
cfgadm_usb(1M), attributes(5), usba(7D) Writing Device Drivers Universal Serial Bus Specification 1.0 and 1.1 System Administration Guide: Basic Administration DIAGNOSTICS
In addition to being logged, the following messages may appear on the system console. All messages are formatted in the following manner: Warning: <device path> (usb_mid<instance number>): Error Message... Cannot access <device>. Please reconnect. This device has been disconnected because a device other than the original one has been inserted. The driver informs you of this fact by displaying the name of the original device. Device not identical to the previous one on this port. Please disconnect and reconnect. Same condition as described above; however in this case, the driver is unable to identify the original device with a name string. Please disconnect and reconnect this device. A hotplug of the device is needed before it can be restored. SunOS 5.10 9 Oct 2004 usb_mid(7D)
Man Page

15 More Discussions You Might Find Interesting

1. IP Networking

IP Addressing with Digital Unix

I'm trying to set up an IP address on a Digital Unix box. I would like to know the commands in order to do so. thanks (5 Replies)
Discussion started by: lavelyj
5 Replies

2. UNIX for Advanced & Expert Users

device - > slot

Hi all.. I have a Sun Ultra 450 with a lot of drives and scsi controllers installed and i have one bad internal disk.. How can "map" ex /dev/dsk/c3t2d0s0 to a slot in the internal cabinet? Any good ideas? I dont want to remove the wrong disk :) thanks in advance.. (3 Replies)
Discussion started by: s93366
3 Replies

3. UNIX for Advanced & Expert Users

Need Help , Ultra SPARC can not loading

Dear All, I have trouble, I have SPARC Machine and when start for loading, can not finish ! this is copy off message from my system Netra t 1120/1125 (UltraSPARC-II 440MHz), No Keyboard OpenBoot 3.31, 512 MB memory installed, Serial #12116535. Ethernet address 8:0:20:b8:e2:37, Host ID:... (4 Replies)
Discussion started by: heru_90
4 Replies

4. Solaris

PCI slot info on V480/V490

Hi, How can I know slot wise info on a sun v480 box. I want to have the details like which slot has which card (slot 1- HBA, slot 2 - quad NIC) .. I know that sysdef, prtconf or prtdiag outputs will help to get this. But I dont know how to conclude from those outputs. Can anybody help me to... (4 Replies)
Discussion started by: vasu2020
4 Replies

5. Solaris

Error: Memory Address Not aligned

Hi, The following error message occured when I was trying to reboot my SUN machine: Memory address not aligned Its a Sun 280 R , Ultra SPARC III What should I do. Varma (3 Replies)
Discussion started by: gunnervarma
3 Replies

6. Solaris

How much better performance is ultra SPARC IV+ 1.95GHz than 1.35GHz?

Dear Guru, My boss has a plan to upgrade cpu of server so he needs to know how much better performance(percentage) is Ultra SPARC IV+ 1.95 GHz than Ultra SPARC IV 1.35 GHz?. I am looking for documentation to reference but I didn't see anything close to my point. If who know,... (3 Replies)
Discussion started by: unitipon
3 Replies

7. UNIX for Advanced & Expert Users

How to erase tape data in unix V4.0 D?

hi! my computer is... System: Digital Personal Workstation 433a Processor: Digital Alpha 21164, 433 MHz Memory: 64 MB OS: Digital Unix Console (SRM), Digital Unix V4.0D how to erase tape data? I tried with mt erase but no success. My tape is 120m. So, how can i erase tape? ... (5 Replies)
Discussion started by: akz
5 Replies

8. UNIX for Advanced & Expert Users

Can I change unix to linux?

System: Digital Personal Workstation 433a Processor: Digital Alpha 21164, 433 MHz Memory: 64 MB OS: Digital Unix Console (SRM), Digital Unix V4.0D This type of conmputer run radar application. What i would like to know is whether i can change OS or not. Thanks in advance. (7 Replies)
Discussion started by: akz
7 Replies

9. Solaris

SPARC and device drivers

Hello all, I'm new here.. Can you please help me with device driver on Solaris10, Sun SPARC server; I need to know how to test if a PCI card is recognized and has a working driver. How to do it? As it is, the driver seems to be 'not attached', but some say it could be because the PCI card is not... (10 Replies)
Discussion started by: orange47
10 Replies

10. AIX

Memory - Which slots and how much?

Hi, all. I was wondering if there's a command or log file that will tell me how much RAM is in the system and, more specifically, the size of each stick. Thanks, Jason (3 Replies)
Discussion started by: JasonRkr
3 Replies

11. Solaris

prtdiag output for Solaris on Fujitsu hardware shows vendor as Sun Microsystems

Hello, I was under the impression that the Header of the prtdiag output shows the hardware vendor information in the section between System Configuration and sun4u/sun4us. But on some Solaris machines which are running on Fujitsu hardware, the vendor is shown as Sun Microsystems in this... (8 Replies)
Discussion started by: chattygk
8 Replies

12. Solaris

Old Sun machine documentation needed

Hi all. Last year, after registering on Sun support site, I downloaded for free all available documentation (in PDF) and support files of a couple of old Sun workstations (Ultra 5 and Ultra 10). Now I need the documentation and support files of other old Sun workstations (SPARCstation 20 and... (4 Replies)
Discussion started by: wisechip
4 Replies

13. Hardware

Sun X4100 graphics

Hello all. I have a requirement to install a aftermarket video card in the server, can you advise what fits? or if there is a sun riser part which convers the PCIx slot to PCIe The unit is a standard x4100 with PCIx slots, not an M2 with the PCIe slots. thanks (4 Replies)
Discussion started by: petebarchetta
4 Replies

14. UNIX for Dummies Questions & Answers

Shc on SUN 5.10 SPARC

Hello, I would like to use shc on SUN 5.10 SPARC and HP UX Itanium 11.31 so that I could do some encrypting on my shell scripts. But on these machines I don"t have cc or gcc. I find a man who can download shc.c and send me the binary files. You can download it here : www datsi fi upm es... (3 Replies)
Discussion started by: peg
3 Replies

15. Solaris

Sun Ultra 5 new user

Hi I have just acquired an Ultra 5. It has 256MB of memory and a 360Mhz Ultra IIi SPARC processor. So far, I have had some typical fun and games to get it working: - It had a dead NVRAM chip. I hacked it open and installed a CR2032. It looks suitably bodged up, but is working. I set the MAC... (8 Replies)
Discussion started by: _JonB_
8 Replies