Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

scconf_transp_adap_e1000g(1m) [opensolaris man page]

scconf_transp_adap_e1000g(1M)				  System Administration Commands			     scconf_transp_adap_e1000g(1M)

NAME
scconf_transp_adap_e1000g - configure the Intel PRO/1000 network adapter DESCRIPTION
Note - Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor- mation about the object-oriented command set, see the Intro(1CL) man page. You can configure e1000g Intel PRO/1000 network adapters as cluster transport adapters. These adapters can only be used with transport type dlpi. The e1000g based network adapter connects to a transport switch or to another Ethernet adapter on a different node. In either case, the connection is made through a transport cable. When a transport switch is used and the endpoints of the transport cable are configured by using scconf, scinstall, or other tools, you are asked to specify a port name on the transport switch. You can provide any port name, or accept the default, as long as the name is unique for the switch. The default is to set the port name to the node identifier that hosts the adapter at the other end of the cable. There are no user configurable properties for cluster transport adapters of this type. ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Architecture |x86 | +-----------------------------+-----------------------------+ SEE ALSO
Intro(1CL), clinterconnect(1CL), clnode(1CL), scconf(1M), scinstall(1M), e1000g(7D) Sun Cluster 3.2 4 May 2006 scconf_transp_adap_e1000g(1M)

Check Out this Related Man Page

scsetup(1M)						  System Administration Commands					       scsetup(1M)

NAME
scsetup - interactive cluster configuration tool SYNOPSIS
scsetup [-f logfile] DESCRIPTION
Note - Beginning with the Sun Cluster 3.2 release, Sun Cluster software includes an object-oriented command set. Although Sun Cluster software still supports the original command set, Sun Cluster procedural documentation uses only the object-oriented command set. For more infor- mation about the object-oriented command set, see the Intro(1CL) man page. The scsetup command provides the following configuration capabilities, depending on what state the cluster is in when you issue the com- mand: o When you run the scsetup command at post-installation time, the command performs initial setup tasks, such as configuring quorum devices and resetting the installmode property. If you did not use automatic quorum configuration when you created the cluster, run the scsetup command immediately after the cluster is installed. Ensure that all nodes have joined the cluster before you run the scsetup command and reset the installmode property. If you used automatic quorum configuration when you created the cluster, you do not need to run the scsetup command after clus- ter installation. The automatic quorum configuration feature also resets the installmode property of the cluster. o When you run the command during normal cluster operation, the scsetup command provides a menu-driven utility. You can use this utility to perform most ongoing cluster-administration tasks. o When you issue the command from a node that is in noncluster mode, the scsetup utility provides a menu-driven utility for chang- ing and displaying the private IP address range. You must reboot all nodes into noncluster mode before you start this form of the scsetup utility. You can issue the scsetup command from any node in the cluster. You can use this command only in the global zone. OPTIONS
The following options are supported: -f logfile Specifies the name of a log file to which commands can be logged. If you specify this option, most command sets that the scsetup utility generates are run and logged, or only logged, depending on user responses. ATTRIBUTES
See attributes(5) for descriptions of the following attributes. +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWsczu | +-----------------------------+-----------------------------+ |Interface Stability |Evolving | +-----------------------------+-----------------------------+ SEE ALSO
Intro(1CL), cltelemetryattribute(1CL), cldevicegroup(1CL), clnode(1CL), clquorum(1CL), clreslogicalhostname(1CL), clresourcegroup(1CL), clresourcetype(1CL), clressharedaddress(1CL), cluster(1CL), Sun Cluster 3.2 18 Jul 2006 scsetup(1M)
Man Page