opensolaris man page for prtdiag

prtdiag(1M)						  System Administration Commands					       prtdiag(1M)

NAME
       prtdiag - display system diagnostic information

SYNOPSIS
       /usr/sbin/prtdiag [-v] [-l]

DESCRIPTION
       prtdiag displays system configuration and diagnostic information on sun4u, sun4v, and x86 systems.

       The diagnostic information lists any failed field replaceable units (FRUs) in the system.

       The interface, output, and location in the directory hierarchy for prtdiag are uncommitted and subject to change in future releases.

       prtdiag	does  not  display  diagnostic	information  and  environmental  status  when executed on the Sun Enterprise 10000 server. See the
       /var/opt/SUNWssp/adm/${SUNW_HOSTNAME}/messages file on the system service processor (SSP) to obtain such information for this server.

OPTIONS
       The following options are supported:

       -l    Log output. If failures or errors exist in the system, output this information to syslogd(1M) only.

       -v    Verbose mode. Displays the time of the most recent AC Power failure, and the most recent hardware fatal error  information,  and  (if
	     applicable) environmental status. The hardware fatal error information is useful to repair and manufacturing for detailed diagnostics
	     of FRUs.

EXIT STATUS
       The following exit values are returned:

       0    No failures or errors are detected in the system.

       1    Failures or errors are detected in the system.

       2    An internal prtdiag error occurred, for example, out of memory.

ATTRIBUTES
       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWkvm			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Unstable* 		   |
       +-----------------------------+-----------------------------+

       *The output is unstable.

SEE ALSO
       modinfo(1M), prtconf(1M), psrinfo(1M), sysdef(1M), syslogd(1M), attributes(5), openprom(7D)

NOTES
       Not all diagnostic and system information is available on every Solaris platform, and therefore cannot be displayed by  prtdiag.  On  those
       platforms, further information can be obtained from the System Controller.

SunOS 5.11							    2 Sep 2008							       prtdiag(1M)