SYSTEMD-RUN(1) systemd-run SYSTEMD-RUN(1)
NAME
systemd-run - Run programs in transient scope units, service units, or path-, socket-, or timer-triggered service units
SYNOPSIS
systemd-run [OPTIONS...] COMMAND [ARGS...]
systemd-run [OPTIONS...] [PATH OPTIONS...] {COMMAND} [ARGS...]
systemd-run [OPTIONS...] [SOCKET OPTIONS...] {COMMAND} [ARGS...]
systemd-run [OPTIONS...] [TIMER OPTIONS...] {COMMAND} [ARGS...]
DESCRIPTION
systemd-run may be used to create and start a transient .service or .scope unit and run the specified COMMAND in it. It may also be used to
create and start a transient .path, .socket, or .timer unit, that activates a .service unit when elapsing.
If a command is run as transient service unit, it will be started and managed by the service manager like any other service, and thus shows
up in the output of systemctl list-units like any other unit. It will run in a clean and detached execution environment, with the service
manager as its parent process. In this mode, systemd-run will start the service asynchronously in the background and return after the
command has begun execution (unless --no-block or --wait are specified, see below).
If a command is run as transient scope unit, it will be executed by systemd-run itself as parent process and will thus inherit the
execution environment of the caller. However, the processes of the command are managed by the service manager similar to normal services,
and will show up in the output of systemctl list-units. Execution in this case is synchronous, and will return only when the command
finishes. This mode is enabled via the --scope switch (see below).
If a command is run with path, socket, or timer options such as --on-calendar= (see below), a transient path, socket, or timer unit is
created alongside the service unit for the specified command. Only the transient path, socket, or timer unit is started immediately, the
transient service unit will be triggered by the path, socket, or timer unit. If the --unit= option is specified, the COMMAND may be
omitted. In this case, systemd-run creates only a .path, .socket, or .timer unit that triggers the specified unit.
OPTIONS
The following options are understood:
--no-ask-password
Do not query the user for authentication for privileged operations.
--scope
Create a transient .scope unit instead of the default transient .service unit (see above).
--unit=
Use this unit name instead of an automatically generated one.
--property=, -p
Sets a property on the scope or service unit that is created. This option takes an assignment in the same format as systemctl(1)'s
set-property command.
--description=
Provide a description for the service, scope, path, socket, or timer unit. If not specified, the command itself will be used as a
description. See Description= in systemd.unit(5).
--slice=
Make the new .service or .scope unit part of the specified slice, instead of system.slice.
-r, --remain-after-exit
After the service process has terminated, keep the service around until it is explicitly stopped. This is useful to collect runtime
information about the service after it finished running. Also see RemainAfterExit= in systemd.service(5).
--send-sighup
When terminating the scope or service unit, send a SIGHUP immediately after SIGTERM. This is useful to indicate to shells and
shell-like processes that the connection has been severed. Also see SendSIGHUP= in systemd.kill(5).
--service-type=
Sets the service type. Also see Type= in systemd.service(5). This option has no effect in conjunction with --scope. Defaults to simple.
--uid=, --gid=
Runs the service process under the specified UNIX user and group. Also see User= and Group= in systemd.exec(5).
--nice=
Runs the service process with the specified nice level. Also see Nice= in systemd.exec(5).
-E NAME=VALUE, --setenv=NAME=VALUE
Runs the service process with the specified environment variable set. Also see Environment= in systemd.exec(5).
--pty, -t
When invoking the command, the transient service connects its standard input, output and error to the terminal systemd-run is invoked
on, via a pseudo TTY device. This allows running programs that expect interactive user input/output as services, such as interactive
command shells.
Note that machinectl(1)'s shell command is usually a better alternative for requesting a new, interactive login session on the local
host or a local container.
See below for details on how this switch combines with --pipe.
--pipe, -P
If specified, standard input, output, and error of the transient service are inherited from the systemd-run command itself. This allows
systemd-run to be used within shell pipelines. Note that this mode is not suitable for interactive command shells and similar, as the
service process will not become a TTY controller when invoked on a terminal. Use --pty instead in that case.
When both --pipe and --pty are used in combination the more appropriate option is automatically determined and used. Specifically, when
invoked with standard input, output and error connected to a TTY --pty is used, and otherwise --pipe.
When this option is used the original file descriptors systemd-run receives are passed to the service processes as-is. If the service
runs with different privileges than systemd-run, this means the service might not be able to re-open the passed file descriptors, due
to normal file descriptor access restrictions. If the invoked process is a shell script that uses the echo "hello" > /dev/stderr
construct for writing messages to stderr, this might cause problems, as this only works if stderr can be re-opened. To mitigate this
use the construct echo "hello" >&2 instead, which is mostly equivalent and avoids this pitfall.
--quiet, -q
Suppresses additional informational output while running. This is particularly useful in combination with --pty when it will suppress
the initial message explaining how to terminate the TTY connection.
--on-active=, --on-boot=, --on-startup=, --on-unit-active=, --on-unit-inactive=
Defines a monotonic timer relative to different starting points for starting the specified command. See OnActiveSec=, OnBootSec=,
OnStartupSec=, OnUnitActiveSec= and OnUnitInactiveSec= in systemd.timer(5) for details. These options are shortcuts for
--timer-property= with the relevant properties. These options may not be combined with --scope or --pty.
--on-calendar=
Defines a calendar timer for starting the specified command. See OnCalendar= in systemd.timer(5). This option is a shortcut for
--timer-property=OnCalendar=. This option may not be combined with --scope or --pty.
--path-property=, --socket-property=, --timer-property=
Sets a property on the path, socket, or timer unit that is created. This option is similar to --property= but applies to the transient
path, socket, or timer unit rather than the transient service unit created. This option takes an assignment in the same format as
systemctl(1)'s set-property command. These options may not be combined with --scope or --pty.
--no-block
Do not synchronously wait for the unit start operation to finish. If this option is not specified, the start request for the transient
unit will be verified, enqueued and systemd-run will wait until the unit's start-up is completed. By passing this argument, it is only
verified and enqueued. This option may not be combined with --wait.
--wait
Synchronously wait for the transient service to terminate. If this option is specified, the start request for the transient unit is
verified, enqueued, and waited for. Subsequently the invoked unit is monitored, and it is waited until it is deactivated again (most
likely because the specified command completed). On exit, terse information about the unit's runtime is shown, including total runtime
(as well as CPU usage, if --property=CPUAccounting=1 was set) and the exit code and status of the main process. This output may be
suppressed with --quiet. This option may not be combined with --no-block, --scope or the various path, socket, or timer options.
-G, --collect
Unload the transient unit after it completed, even if it failed. Normally, without this option, all units that ran and failed are kept
in memory until the user explicitly resets their failure state with systemctl reset-failed or an equivalent command. On the other hand,
units that ran successfully are unloaded immediately. If this option is turned on the "garbage collection" of units is more aggressive,
and unloads units regardless if they exited successfully or failed. This option is a shortcut for
--property=CollectMode=inactive-or-failed, see the explanation for CollectMode= in systemd.unit(5) for further information.
--user
Talk to the service manager of the calling user, rather than the service manager of the system.
--system
Talk to the service manager of the system. This is the implied default.
-H, --host=
Execute the operation remotely. Specify a hostname, or a username and hostname separated by "@", to connect to. The hostname may
optionally be suffixed by a container name, separated by ":", which connects directly to a specific container on the specified host.
This will use SSH to talk to the remote machine manager instance. Container names may be enumerated with machinectl -H HOST.
-M, --machine=
Execute operation on a local container. Specify a container name to connect to.
-h, --help
Print a short help text and exit.
--version
Print a short version string and exit.
All command line arguments after the first non-option argument become part of the command line of the launched process. If a command is run
as service unit, the first argument needs to be an absolute program path.
EXIT STATUS
On success, 0 is returned, a non-zero failure code otherwise.
EXAMPLES
Example 1. Logging environment variables provided by systemd to services
# systemd-run env
Running as unit: run-19945.service
# journalctl -u run-19945.service
Sep 08 07:37:21 bupkis systemd[1]: Starting /usr/bin/env...
Sep 08 07:37:21 bupkis systemd[1]: Started /usr/bin/env.
Sep 08 07:37:21 bupkis env[19948]: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin
Sep 08 07:37:21 bupkis env[19948]: LANG=en_US.UTF-8
Sep 08 07:37:21 bupkis env[19948]: BOOT_IMAGE=/vmlinuz-3.11.0-0.rc5.git6.2.fc20.x86_64
Example 2. Limiting resources available to a command
# systemd-run -p BlockIOWeight=10 updatedb
This command invokes the updatedb(8) tool, but lowers the block I/O weight for it to 10. See systemd.resource-control(5) for more
information on the BlockIOWeight= property.
Example 3. Running commands at a specified time
The following command will touch a file after 30 seconds.
# date; systemd-run --on-active=30 --timer-property=AccuracySec=100ms /bin/touch /tmp/foo
Mon Dec 8 20:44:24 KST 2014
Running as unit: run-71.timer
Will run service as unit: run-71.service
# journalctl -b -u run-71.timer
-- Logs begin at Fri 2014-12-05 19:09:21 KST, end at Mon 2014-12-08 20:44:54 KST. --
Dec 08 20:44:38 container systemd[1]: Starting /bin/touch /tmp/foo.
Dec 08 20:44:38 container systemd[1]: Started /bin/touch /tmp/foo.
# journalctl -b -u run-71.service
-- Logs begin at Fri 2014-12-05 19:09:21 KST, end at Mon 2014-12-08 20:44:54 KST. --
Dec 08 20:44:48 container systemd[1]: Starting /bin/touch /tmp/foo...
Dec 08 20:44:48 container systemd[1]: Started /bin/touch /tmp/foo.
Example 4. Allowing access to the tty
The following command invokes /bin/bash as a service passing its standard input, output and error to the calling TTY.
# systemd-run -t --send-sighup /bin/bash
Example 5. Start screen as a user service
$ systemd-run --scope --user screen
Running scope as unit run-r14b0047ab6df45bfb45e7786cc839e76.scope.
$ screen -ls
There is a screen on:
492..laptop (Detached)
1 Socket in /var/run/screen/S-fatima.
This starts the screen process as a child of the systemd --user process that was started by user@.service, in a scope unit. A
systemd.scope(5) unit is used instead of a systemd.service(5) unit, because screen will exit when detaching from the terminal, and a
service unit would be terminated. Running screen as a user unit has the advantage that it is not part of the session scope. If
KillUserProcesses=yes is configured in logind.conf(5), the default, the session scope will be terminated when the user logs out of that
session.
The user@.service is started automatically when the user first logs in, and stays around as long as at least one login session is open.
After the user logs out of the last session, user@.service and all services underneath it are terminated. This behavior is the default,
when "lingering" is not enabled for that user. Enabling lingering means that user@.service is started automatically during boot, even if
the user is not logged in, and that the service is not terminated when the user logs out.
Enabling lingering allows the user to run processes without being logged in, for example to allow screen to persist after the user logs
out, even if the session scope is terminated. In the default configuration, users can enable lingering for themselves:
$ loginctl enable-linger
SEE ALSO
systemd(1), systemctl(1), systemd.unit(5), systemd.service(5), systemd.scope(5), systemd.slice(5), systemd.exec(5), systemd.resource-
control(5), systemd.timer(5), systemd-mount(1), machinectl(1)
systemd 237 SYSTEMD-RUN(1)