sa2(8) [opendarwin man page]
sa2(8) BSD System Manager's Manual sa2(8) NAME
sa2 -- Generate a system activity daily report file. SYNOPSIS
/usr/lib/sa/sa2 [-dgpu] [-n mode] [-e time] [-f filename] [-i seconds] [-s time] DESCRIPTION
The sa2 command is a shell script used to invoke the system activity reporter sar for purposes of generating the standard default daily report file. The report file generated is, /var/log/sa/sardd where the dd represents the current day of the month. The sa2 options are the same as those documented in sar(1). When sa2 runs, it will also remove data and report files, found in /var/log/sa, that are more than one week old. The sa2 command is intended to be started by cron. EXAMPLE CRON ENTRY
# Starting at 8am collect system activity records # every 20 minutes for 12 hours # 20 minutes = 1200 seconds # 12 hours with 3 samples each hour = 36 loops 0 8 * * 1-5 /usr/lib/sa/sa1 1200 36 # After the 12 hour period, # collect a system activity report 30 20 * * 1-5 /usr/lib/sa/sa2 -A FILES
/var/log/sa/sardd Default daily report file. /var/log/sa/sadd Default daily data file. dd are digits that represent the day of the month. SEE ALSO
sa1(8), sadc(8), sar(1), iostat(8), vm_stat(1), netstat(1), top(1), sc_usage(1), fs_usage(1), crontab(1), crontab(5) Mac OS X Jul 25 2003 Mac OS X
Check Out this Related Man Page
sar(1M) System Administration Commands sar(1M) NAME
sar, sa1, sa2, sadc - system activity report package SYNOPSIS
/usr/lib/sa/sadc [t n] [ofile] /usr/lib/sa/sa1 [t n] /usr/lib/sa/sa2 [-aAbcdgkmpqruvwy] [-e time] [-f filename] [-i sec] [-s time] DESCRIPTION
System activity data can be accessed at the special request of a user (see sar(1)) and automatically, on a routine basis, as described here. The operating system contains several counters that are incremented as various system actions occur. These include counters for CPU utilization, buffer usage, disk and tape I/O activity, TTY device activity, switching and system-call activity, file-access, queue activ- ity, inter-process communications, and paging. For more general system statistics, use iostat(1M), sar(1), or vmstat(1M). sadc and two shell procedures, sa1 and sa2, are used to sample, save, and process this data. sadc, the data collector, samples system data n times, with an interval of t seconds between samples, and writes in binary format to ofile or to standard output. The sampling interval t should be greater than 5 seconds; otherwise, the activity of sadc itself may affect the sam- ple. If t and n are omitted, a special record is written. This facility can be used at system boot time, when booting to a multi-user state, to mark the time at which the counters restart from zero. For example, when accounting is enabled, the svc:/system/sar:default ser- vice writes the restart mark to the daily data file using the command entry: su sys -c "/usr/lib/sa/sadc /var/adm/sa/sa'date +%d'" The shell script sa1, a variant of sadc, is used to collect and store data in the binary file /var/adm/sa/sadd, where dd is the current day. The arguments t and n cause records to be written n times at an interval of t seconds, or once if omitted. The following entries in /var/spool/cron/crontabs/sys will produce records every 20 minutes during working hours and hourly otherwise: 0 * * * 0-6 /usr/lib/sa/sa1 20,40 8-17 * * 1-5 /usr/lib/sa/sa1 See crontab(1) for details. The shell script sa2, a variant of sar, writes a daily report in the file /var/adm/sa/sardd. See the OPTIONS section in sar(1) for an explanation of the various options. The following entry in /var/spool/cron/crontabs/sys will report important activities hourly during the working day: 5 18 * * 1-5 /usr/lib/sa/sa2 -s 8:00 -e 18:01 -i 1200 -A FILES
/tmp/sa.adrfl address file /var/adm/sa/sadd Daily data file /var/adm/sa/sardd Daily report file /var/spool/cron/crontabs/sys ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWaccu | +-----------------------------+-----------------------------+ SEE ALSO
crontab(1), sag(1), sar(1), svcs(1), timex(1), iostat(1M), svcadm(1M), vmstat(1M), attributes(5), smf(5) NOTES
The sar service is managed by the service management facility, smf(5), under the service identifier: svc:/system/sar Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The ser- vice's status can be queried using the svcs(1) command. SunOS 5.11 20 Aug 2004 sar(1M)