Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

secmodel_eval(9) [netbsd man page]

SECMODEL(9)						   BSD Kernel Developer's Manual					       SECMODEL(9)

secmodel -- security model development guidelines SYNOPSIS
#include <secmodel/secmodel.h> int secmodel_register(secmodel_t *sm, const char *id, const char *name, prop_dictionary_t behavior, secmodel_eval_t sm_eval, secmodel_setinfo_t sm_setinfo); int secmodel_deregister(secmodel_t sm); int secmodel_eval(const char *id, const char *what, void *arg, void *ret); static int secmodel_<model>_eval(const char *what, void *arg, void *ret); DESCRIPTION
NetBSD provides a complete abstraction of the underlying security model used within the operating system through a set of kauth(9) scopes and actions. It allows maintaining the traditional security model (based on a single super-user and above-super-user restrictions known as securelevel) while decoupling it easily from the system. It is possible to modify the security model -- either slightly or using an entirely different model -- by attaching/detaching kauth(9) lis- teners. This can be done via the secmodel pluggable framework. A secmodel is typically implemented as a kernel module(9), and can be either built-in statically or loaded dynamically at run-time. They base their decisions on available information, either directly from kernel, from a userspace daemon or even from a centralized network autho- rization server. DATA TYPES
The secmodel framework offers the following data types: secmodel_t An opaque type that describes a secmodel. FUNCTIONS
secmodel_register(sm, id, name, behavior, sm_eval, sm_setinfo) Register a security model to the secmodel framework and stores its description inside sm. sm The secmodel description. id The unique identifier of the secmodel. name The descriptive human-readable name of the secmodel. behavior (optional) a prop_dictionary(3) that declares the behavior of this security model, like ``copy credentials on fork.'' sm_eval (optional) the secmodel_<model>_eval() callback used by a secmodel to register an evaluation routine that can be queried later by another security model. sm_setinfo (optional) the secmodel_<model>_setinfo() callback used by a secmodel to register a routine that permits other security models to alter the secmodel internals. Currently not implemented. secmodel_deregister(sm) Deregister the secmodel described by sm. secmodel_eval(id, what, arg, ret) Call the evaluation callback implemented by a security model. The return value can be either: - zero (0), when the call succeeded. - positive, when the error comes directly from the secmodel framework. - negative, when the error comes from the evaluation callback implemented in the targetted security model. The value is then implementation-defined. id The unique identifier of the targetted secmodel. what The query that will be passed down to the targetted secmodel. arg The arguments passed to the evaluation routine of the targetted secmodel. ret The answer of the evaluation routine. RETURN VALUES
If successful, functions return 0. Otherwise, the following error values are returned: [EEXIST] The secmodel is already registered. [EFAULT] An invalid address or reference was passed as parameter. [EINVAL] An invalid value was passed as parameter. [ENOENT] The targetted secmodel does not exist, or it does not implement an evaluation callback. WRITING A SECURITY MODEL
Before writing a security model one should be familiar with the kauth(9) KPI, its limitations, requirements, and so on. See kauth(9) for details. A security model is based on the kernel module(9) framework, and can be built-in statically inside kernel or loaded dynamically at run-time. It is composed of (code-wise) the following components: 1. module(9) routines, especially a MODULE() declaration and a secmodel_<model>_modcmd() function used to start (through MODULE_CMD_INIT) and stop (through MODULE_CMD_FINI) the secmodel. 2. Entry routines, named secmodel_<model>_init() and secmodel_<model>_start(), used to initialize and start the security model, and another function called secmodel_<model>_stop(), to stop the security model in case the module is to be unloaded. 3. A sysctl(9) setup routine for the model. This should create an entry for the model in the sysctl(7) namespace, under the "secu- rity.models.<model>" hierarchy. All "knobs" for the model should be located under the new node, as well as a mandatory name variable, indicating a descriptive human-readable name for the model. 4. A sysctl(9) teardown routine used to destroy the sysctl(7) tree associated with the model. 5. If the model uses any private data inside credentials, listening on the credentials scope, KAUTH_SCOPE_CRED, is required. 6. Optionally, internal data-structures used by the model. These must all be prefixed with "secmodel_<model>_". 7. A set of listeners, attached to various scopes, used to enforce the policy the model intends to implement. 8. Finally, a security model should register itself after being initialized using secmodel_register(), and deregister itself before being stopped using secmodel_deregister(). EXAMPLES
Below is sample code for a kauth(9) network scope listener for the jenna security model. It is used to allow users with a user-id below 1000 to bind to reserved ports (for example, 22/TCP): int secmodel_jenna_network_cb(kauth_cred_t cred, kauth_action_t action, void *cookie, void *arg0, void *arg1, void *arg2, void *arg3) { int result; /* Default defer. */ result = KAUTH_RESULT_DEFER; switch (action) { case KAUTH_NETWORK_BIND: /* * We only care about bind(2) requests to privileged * ports. */ if ((u_long)arg0 == KAUTH_REQ_NETWORK_BIND_PRIVPORT) { /* * If the user-id is below 1000, which may * indicate a "reserved" user-id, allow the * request. */ if (kauth_cred_geteuid(cred) < 1000) result = KAUTH_RESULT_ALLOW; } break; } return (result); } There are two main issues, however, with that listener, that you should be aware of when approaching to write your own security model: 1. kauth(9) uses restrictive decisions: if you attach this listener on-top of an existing security model, even if it would allow the request, it could still be denied. 2. If you attach this listener as the only listener for the network scope, there are many other requests that will be deferred and, eventually, denied -- which may not be desired. That's why before implementing listeners, it should be clear whether they implement an entirely new from scratch security model, or add on- top of an existing one. PROGRAMMING CONSIDERATIONS
There are several things you should remember when writing a security model: - Pay attention to the correctness of your secmodel implementation of the desired policy. Certain rights can grant more privileges on the system than others, like allowing calls to chroot(2) or mounting a file-system. - All unhandled requests are denied by default. - Authorization requests can not be issued when the kernel is holding any locks. This is a requirement from kernel code to allow designing security models where the request should be dispatched to userspace or a different host. - Private listener data -- such as internal data-structures -- is entirely under the responsibility of the developer. Locking, syn- chronization, and garbage collection are all things that kauth(9) does not take care of for you! STACKING ON AN EXISTING SECURITY MODEL One of the shortcomings of kauth(9) is that it does not provide any stacking mechanism, similar to Linux Security Modules (LSM). This, how- ever, is considered a feature in reducing dependency on other people's code. To properly "stack" minor adjustments on-top of an existing security model, one could use one of two approaches: 1. Register an internal scope for the security model to be used as a fall-back when requests are deferred. This requires the security model developer to add an internal scope for every scope the model partly covers, and register the fall-back listeners to it. In the model's listener(s) for the scope, when a defer decision is made, the request is passed to be authorized on the internal scope, effectively using the fall-back security model. Here is example code that implements the above: #include <secmodel/bsd44/bsd44.h> /* * Internal fall-back scope for the network scope. */ #define JENNA_ISCOPE_NETWORK "" static kauth_scope_t secmodel_jenna_iscope_network; /* * Jenna's entry point. Register internal scope for the network scope * which we partly cover for fall-back authorization. */ void secmodel_jenna_start(void) { secmodel_jenna_iscope_network = kauth_register_scope( JENNA_ISCOPE_NETWORK, NULL, NULL); kauth_listen_scope(JENNA_ISCOPE_NETWORK, secmodel_bsd44_suser_network_cb, NULL); kauth_listen_scope(JENNA_ISCOPE_NETWORK, secmodel_securelevel_network_cb, NULL); } /* * Jenna sits on top of another model, effectively filtering requests. * If it has nothing to say, it discards the request. This is a good * example for fine-tuning a security model for a special need. */ int secmodel_jenna_network_cb(kauth_cred_t cred, kauth_action_t action, void *cookie, void *arg0, void *arg1, void *arg2, void *arg3) { int result; /* Default defer. */ result = KAUTH_RESULT_DEFER; switch (action) { case KAUTH_NETWORK_BIND: /* * We only care about bind(2) requests to privileged * ports. */ if ((u_long)arg0 == KAUTH_REQ_NETWORK_BIND_PRIVPORT) { if (kauth_cred_geteuid(cred) < 1000) result = KAUTH_RESULT_ALLOW; } break; } /* * If we have don't have a decision, fall-back to the bsd44 * security model. */ if (result == KAUTH_RESULT_DEFER) result = kauth_authorize_action( secmodel_jenna_iscope_network, cred, action, arg0, arg1, arg2, arg3); return (result); } 2. If the above is not desired, or cannot be used for any reason, there is always the ability to manually call the fall-back routine: int secmodel_jenna_network_cb(kauth_cred_t cred, kauth_action_t action, void *cookie, void *arg0, void *arg1, void *arg2, void *arg3) { int result; /* Default defer. */ result = KAUTH_RESULT_DEFER; switch (action) { case KAUTH_NETWORK_BIND: /* * We only care about bind(2) requests to privileged * ports. */ if ((u_long)arg0 == KAUTH_REQ_NETWORK_BIND_PRIVPORT) { if (kauth_cred_geteuid(cred) < 1000) result = KAUTH_RESULT_ALLOW; } break; } /* * If we have don't have a decision, fall-back to the bsd44 * security model's suser behavior. */ if (result == KAUTH_RESULT_DEFER) result = secmodel_bsd44_suser_network_cb(cred, action, cookie, arg0, arg1, arg2, arg3); return (result); } AVAILABLE SECURITY MODELS
The following is a list of security models available in the default NetBSD distribution. secmodel_suser(9) Implements the super-user (root) security policy. secmodel_securelevel(9) Implements the securelevel security model. secmodel_extensions(9) Implements extensions to the traditional 4.4BSD security model, like usermounts. secmodel_bsd44(9) Traditional NetBSD security model, derived from 4.4BSD. secmodel_overlay(9) Sample overlay security model, sitting on-top of secmodel_bsd44(9). CODE REFERENCES
The core of the secmodel implementation is in sys/secmodel/secmodel.c. The header file <secmodel/secmodel.h> describes the public interface. To make it easier on developers to write new security models from scratch, NetBSD maintains an example secmodel under share/examples/secmodel/. SEE ALSO
kauth(9), module(9), secmodel_bsd44(9), secmodel_extensions(9), secmodel_overlay(9), secmodel_securelevel(9), secmodel_suser(9) HISTORY
Kernel Authorization was introduced in NetBSD 4.0 as the subsystem responsible for authorization and credential management. Before its introduction, there were several ways for providing resource access control: - Checking if the user in question is the super-user via suser(). - Comparing the user-id against hard-coded values, often zero. - Checking the system securelevel. The problem with the above is that the interface ("can X do Y?") was tightly coupled with the implementation ("is X Z?"). kauth(9) allows separating them, dispatching requests with highly detailed context using a consistent and clear KPI. The secmodel framework was extended in NetBSD 6.0 to implement secmodel registration and evaluation procedure calls. AUTHORS
Elad Efrat <> BSD
December 4, 2011 BSD
Man Page