Home Man
Today's Posts

Linux & Unix Commands - Search Man Pages
Man Page or Keyword Search:
Select Section of Man Page:
Select Man Page Repository:

NetBSD 6.1.5 - man page for ieee80211_media_init (netbsd section 9)

IEEE80211(9)			  BSD Kernel Developer's Manual 		     IEEE80211(9)

     ieee80211_ifattach, ieee80211_ifdetach, ieee80211_mhz2ieee, ieee80211_chan2ieee,
     ieee80211_ieee2mhz, ieee80211_media_init, ieee80211_media_change, ieee80211_media_status,
     ieee80211_watchdog, ieee80211_setmode, ieee80211_chan2mode, ieee80211_rate2media,
     ieee80211_media2rate -- core 802.11 network stack functions

     #include <net80211/ieee80211_var.h>
     #include <net80211/ieee80211_proto.h>

     ieee80211_ifattach(struct ieee80211com *ic);

     ieee80211_ifdetach(struct ieee80211com *ic);

     ieee80211_mhz2ieee(u_int freq, u_int flags);

     ieee80211_chan2ieee(struct ieee80211com *ic, struct ieee80211_channel *c);

     ieee80211_ieee2mhz(u_int chan, u_int flags);

     ieee80211_media_init(struct ieee80211com *ic, ifm_change_cb_t media_change,
	 ifm_stat_cb_t media_stat);

     ieee80211_media_change(struct ifnet *ifp);

     ieee80211_media_status(struct ifnet *ifp, struct ifmediareq *imr);

     ieee80211_watchdog(struct ieee80211com *ic);

     ieee80211_setmode(struct ieee80211com *ic, enum ieee80211_phymode mode);

     enum ieee80211_phymode
     ieee80211_chan2mode(struct ieee80211com *ic, struct ieee80211_channel *chan);

     ieee80211_rate2media(struct ieee80211com *ic, int rate, enum ieee80211_phymode mode);

     ieee80211_media2rate(int mword);

     The ieee80211 collection of functions are used to manage wireless network interfaces in the
     system which use the system's software 802.11 network stack.  Most of these functions
     require that attachment to the stack is performed before calling.	Several utility functions
     are also provided; these are safe to call from any driver without prior initialization.

     The ieee80211_ifattach() function attaches the wireless network interface ic to the 802.11
     network stack layer.  This function must be called before using any of the ieee80211 func-
     tions which need to store driver state across invocations.  This function also performs Eth-
     ernet and BPF attachment (by calling ether_ifattach() and bpfattach2()) on behalf of the

     The ieee80211_ifdetach() function frees any ieee80211 structures associated with the driver,
     and performs Ethernet and BPF detachment on behalf of the caller.

     The ieee80211_mhz2ieee() utility function converts the frequency freq (specified in MHz) to
     an IEEE 802.11 channel number.  The flags argument is a hint which specifies whether the
     frequency is in the 2GHz ISM band (IEEE80211_CHAN_2GHZ) or the 5GHz band
     (IEEE80211_CHAN_5GHZ); appropriate clipping of the result is then performed.

     The ieee80211_chan2ieee() function converts the channel specified in *c to an IEEE channel
     number for the driver ic.	If the conversion would be invalid, an error message is printed
     to the system console.  This function REQUIRES that the driver is hooked up to the ieee80211

     The ieee80211_ieee2mhz() utility function converts the IEEE channel number chan to a fre-
     quency (in MHz).  The flags argument is a hint which specifies whether the frequency is in
     the 2GHz ISM band (IEEE80211_CHAN_2GHZ) or the 5GHz band (IEEE80211_CHAN_5GHZ); appropriate
     clipping of the result is then performed.

     The ieee80211_media_init() function initializes media data structures used by the ifmedia
     interface for the driver ic.  It must be called by the driver after calling
     ieee80211_ifattach() and before calling most ieee80211 functions.	The media_change and
     media_stat arguments specify helper functions which will be invoked by the ifmedia framework
     when the user changes or queries media options, using a command such as ifconfig(8).

     The ieee80211_media_status() and ieee80211_media_change() functions are device-independent
     handlers for ifmedia commands and are not intended to be called directly.

     The ieee80211_watchdog() function is intended to be called from a driver's if_watchdog rou-
     tine.  It is used to perform periodic cleanup of state within the software 802.11 stack, as
     well as timing out scans.

     The ieee80211_setmode() function is called from within the 802.11 stack to change the mode
     of the driver's PHY; it is not intended to be called directly.

     The ieee80211_chan2mode() function returns the PHY mode required for use with the channel
     chan on the device ic.  This is typically used when selecting a rate set, to be advertised
     in beacons, for example.

     The ieee80211_rate2media() function converts the bit rate rate (measured in units of
     0.5Mbps) to an ifmedia sub-type, for the device ic running in PHY mode mode.  The
     ieee80211_media2rate() performs the reverse of this conversion, returning the bit rate (in
     0.5Mbps units) corresponding to an ifmedia sub-type.

     ieee80211_crypto(9), ieee80211_input(9), ieee80211_ioctl(9), ieee80211_node(9),
     ieee80211_output(9), ieee80211_proto(9), ieee80211_radiotap(9)

     The ieee80211 series of functions first appeared in NetBSD 1.5, and were later ported to
     FreeBSD 4.6.

     This man page was written by Bruce M. Simpson <bms@FreeBSD.org> and Darron Broad

BSD					September 12, 2006				      BSD

All times are GMT -4. The time now is 12:39 AM.

Unix & Linux Forums Content Copyrightę1993-2018. All Rights Reserved.
Show Password