BCE(4) BSD Kernel Interfaces Manual BCE(4)NAME
bce -- Broadcom BCM4401 Ethernet device driver
SYNOPSIS
bce* at pci? dev ? function ?
DESCRIPTION
The bce provides support for the Broadcom BCM4401 10/100 Ethernet card. Other cards from the 440x series may also be supported.
SEE ALSO bge(4), mii(4), ukphy(4)HISTORY
The bce driver appeared in NetBSD 1.6.2.
AUTHORS
Cliff Wright <cliff@snipe444.org>
BUGS
There is no VLAN support.
There is no flow control support.
Multicast is not using the packet filter and is in the accept all multicast mode.
BSD June 29, 2006 BSD
Check Out this Related Man Page
GSIP(4) BSD Kernel Interfaces Manual GSIP(4)NAME
gsip -- National Semiconductor DP83820 Gigabit Ethernet driver
SYNOPSIS
gsip* at pci? dev ? function ?
Configuration of PHYs may also be necessary. See mii(4).
DESCRIPTION
The gsip device driver supports Gigabit Ethernet interfaces based on the National Semiconductor DP83820 Gigabit Ethernet chips.
The National Semiconductor DP83820 is found on NetGear GA-622, Asante FriendlyNet GigaNIX, D-Link DGE-500T, SMC 9452TX and 9462TX, Accton
EN1407-T, Planex GN-1000TE, ARK SOHO GA2000T and GA2500T, and other low-cost Gigabit Ethernet cards. It uses an external PHY or an external
10-bit interface.
The DP83820 supports VLAN tag insertion/removal in hardware. The gsip driver supports this feature of the chip.
The DP83820 supports IPv4/TCP/UDP checksumming in hardware. The gsip driver supports this feature of the chip. See ifconfig(8) for informa-
tion on how to enable this feature.
The DP83820 chip is a close relative of the DP83815 10/100 Ethernet chip, which is supported by the sip(4) driver, hence the gsip name.
SEE ALSO arp(4), ifmedia(4), mii(4), netintro(4), pci(4), vlan(4), ifconfig(8)HISTORY
The gsip driver first appeared in NetBSD 1.6.
AUTHORS
The gsip driver was written by Jason R. Thorpe <thorpej@NetBSD.org>.
BUGS
The gsip driver does not support the 10-bit interface, which is required in order to support fiber-optic media.
BSD June 2, 2001 BSD