FLOAT(3) BSD Library Functions Manual FLOAT(3)
NAME
float -- description of floating-point types available on OS X and iOS
DESCRIPTION
This page describes the available C floating-point types. For a list of math library functions that operate on these types, see the page on
the math library, "man math".
TERMINOLOGY
Floating point numbers are represented in three parts: a sign, a mantissa (or significand), and an exponent. Given such a representation
with sign s, mantissa m, and exponent e, the corresponding numerical value is s*m*2**e.
Floating-point types differ in the number of bits of accuracy in the mantissa (called the precision), and set of available exponents (the
exponent range).
Floating-point numbers with the maximum available exponent are reserved operands, denoting an infinity if the significand is precisely zero,
and a Not-a-Number, or NaN, otherwise.
Floating-point numbers with the minimum available exponent are either zero if the significand is precisely zero, and denormal otherwise.
Note that zero is signed: +0 and -0 are distinct floating point numbers.
Floating-point numbers with exponents other than the maximum and minimum available are called normal numbers.
PROPERTIES OF IEEE-754 FLOATING-POINT
Basic arithmetic operations in IEEE-754 floating-point are correctly rounded: this means that the result delivered is the same as the result
that would be achieved by computing the exact real-number operation on the operands, then rounding the real-number result to a floating-point
value.
Overflow occurs when the value of the exact result is too large in magnitude to be represented in the floating-point type in which the compu-
tation is being performed; doing so would require an exponent outside of the exponent range of the type. By default, computations that
result in overflow return a signed infinity.
Underflow occurs when the value of the exact result is too small in magnitude to be represented as a normal number in the floating-point type
in which the computation is being performed. By default, underflow is gradual, and produces a denormal number or a zero.
All floating-points number of a given type are integer multiples of the smallest non-zero floating-point number of that type; however, the
converse is not true. This means that, in the default mode, (x-y) = 0 only if x = y.
The sign of zero transforms correctly through multiplication and division, and is preserved by addition of zeros with like signs, but x - x
yields +0 for every finite floating-point number x. The only operations that reveal the sign of a zero are x/(+-0) and copysign(x,+-0). In
particular, comparisons (x > y, x != y, etc) are not affected by the sign of zero.
The sign of infinity transforms correctly through multiplication and division, and infinities are unaffected by addition or subtraction of
any finite floating-point number. But Inf-Inf, Inf*0, and Inf/Inf are, like 0/0 or sqrt(-3), invalid operations that produce NaN.
NaNs are the default results of invalid operations, and they propagate through subsequent arithmetic operations. If x is a NaN, then x != x
is TRUE, and every other comparison predicate (x > y, x = y, x <= y, etc) evaluates to FALSE, regardless of the value of y. Additionally,
predicates that entail an ordered comparison (rather than mere equality or inequality) signal Invalid Operation when one of the arguments is
NaN.
IEEE-754 provides five kinds of floating-point exceptions, listed below:
Exception Default Result
__________________________________________
Invalid Operation NaN or FALSE
Overflow +-Infinity
Divide by Zero +-Infinity
Underflow Gradual Underflow
Inexact Rounded Value
NOTE: An exception is not an error unless it is handled incorrectly. What makes a class of exceptions exceptional is that no single default
response can be satisfactory in every instance. On the other hand, because a default response will serve most instances of the exception
satisfactorily, simply aborting the computation cannot be justified.
For each kind of floating-point exception, IEEE-754 provides a flag that is raised each time its exception is signaled, and remains raised
until the program resets it. Programs may test, save, and restore the flags, or a subset thereof.
PRECISION AND EXPONENT RANGE OF SPECIFIC FLOATING-POINT TYPES
On both OS X and iOS, the type float corresponds to IEEE-754 single precision. A single-precision number is represented in 32 bits, and has
a precision of 24 significant bits, roughly like 7 significant decimal digits. 8 bits are used to encode the exponent, which gives an expo-
nent range from -126 to 127, inclusive.
The header <float.h> defines several useful constants for the float type:
FLT_MANT_DIG - The number of binary digits in the significand of a float.
FLT_MIN_EXP - One more than the smallest exponent available in the float type.
FLT_MAX_EXP - One more than the largest exponent available in the float type.
FLT_DIG - the precision in decimal digits of a float. A decimal value with this many digits, stored as a float, always yields the same value
up to this many digits when converted back to decimal notation.
FLT_MIN_10_EXP - the smallest n such that 10**n is a non-zero normal number as a float.
FLT_MAX_10_EXP - the largest n such that 10**n is finite as a float.
FLT_MIN - the smallest positive normal float.
FLT_MAX - the largest finite float.
FLT_EPSILON - the difference between 1.0 and the smallest float bigger than 1.0.
On both OS X and iOS, the type double corresponds to IEEE-754 double precision. A double-precision number is represented in 64 bits, and has
a precision of 53 significant bits, roughly like 16 significant decimal digits. 11 bits are used to encode the exponent, which gives an
exponent range from -1022 to 1023, inclusive.
The header <float.h> defines several useful constants for the double type:
DBL_MANT_DIG - The number of binary digits in the significand of a double.
DBL_MIN_EXP - One more than the smallest exponent available in the double type.
DBL_MAX_EXP - One more than the exponent available in the double type.
DBL_DIG - the precision in decimal digits of a double. A decimal value with this many digits, stored as a double, always yields the same
value up to this many digits when converted back to decimal notation.
DBL_MIN_10_EXP - the smallest n such that 10**n is a non-zero normal number as a double.
DBL_MAX_10_EXP - the largest n such that 10**n is finite as a double.
DBL_MIN - the smallest positive normal double.
DBL_MAX - the largest finite double.
DBL_EPSILON - the difference between 1.0 and the smallest double bigger than 1.0.
On Intel macs, the type long double corresponds to IEEE-754 double extended precision. A double extended number is represented in 80 bits,
and has a precision of 64 significant bits, roughly like 19 significant decimal digits. 15 bits are used to encode the exponent, which gives
an exponent range from -16383 to 16384, inclusive.
The header <float.h> defines several useful constants for the long double type:
LDBL_MANT_DIG - The number of binary digits in the significand of a long double.
LDBL_MIN_EXP - One more than the smallest exponent available in the long double type.
LDBL_MAX_EXP - One more than the exponent available in the long double type.
LDBL_DIG - the precision in decimal digits of a long double. A decimal value with this many digits, stored as a long double, always yields
the same value up to this many digits when converted back to decimal notation.
LDBL_MIN_10_EXP - the smallest n such that 10**n is a non-zero normal number as a long double.
LDBL_MAX_10_EXP - the largest n such that 10**n is finite as a long double.
LDBL_MIN - the smallest positive normal long double.
LDBL_MAX - the largest finite long double.
LDBL_EPSILON - the difference between 1.0 and the smallest long double bigger than 1.0.
On ARM iOS devices, the type long double corresponds to IEEE-754 double precision. Thus, the values of the LDBL_* macros are identical to
those of the corresponding DBL_* macros.
SEE ALSO
math(3), complex(3)
STANDARDS
Floating-point arithmetic conforms to the ISO/IEC 9899:2011 standard.
BSD
March 28, 2007 BSD