whoami(1) [minix man page]

WHOAMI(1)						      General Commands Manual							 WHOAMI(1)

NAME

       whoami - print current user name

SYNOPSIS

       whoami

EXAMPLES

       whoami		   # Print user name

DESCRIPTION

       In  case  you  forget  who you are logged in as, whoami will tell you.  If you use su to become somebody else, whoami will give the current
       effective user.

SEE ALSO

       id(1), who(1).

																	 WHOAMI(1)

hostconfig(1M)						  System Administration Commands					    hostconfig(1M)

NAME

       hostconfig - configure a system's host parameters

SYNOPSIS

       /usr/sbin/hostconfig -p protocol [-d] [ -h] [-n] [-v] [-i interface] [-f hostname]

DESCRIPTION

       The  hostconfig program uses a network protocol to acquire a machine's host parameters and set these parameters on the system.

       The program selects which protocol to use based on the argument to the required	-p flag. Different protocols may set different host param-
       eters. Currently, only one protocol (bootparams) is defined.

OPTIONS

       The following options are supported:

       -d		       Enable debug output.

       -f hostname	       Run the protocol as if this machine were named hostname.

       -h		       Echo the received hostname to stdout, rather than setting hostname using the system name directly.

       -i interface	       Use only the named network interface to run the protocol.

       -n		       Run the network protocol, but do not set the acquired parameters into the  system.

       -p protocol	       Run hostconfig using protocol. Currently, only one protocol (bootparams) is available. This option is required.

			       Specifying the -p bootparams option uses the whoami call of the RPC bootparams protocol.  This  sets  the  system's
			       hostname, domainname, and default IP router parameters.

       -v		       Enable verbose output.

EXAMPLES

       Example 1: Configuring Host Parameters with Verbose Output

       The following command configures a machine's host parameters using the whoami call of the RPC bootparams protocol with a verbose output.

       example# hostconfig -p bootparams -v

       Example 2: Displaying Host Parameters

       The following command displays the parameters that would be set using the whoami call of the RPC bootparams protocol.

       example# hostconfig -p bootparams -n -v

       Example 3: Configuring Host Parameters Less the System Name

       The following command configures a machine's host parameters, less the system name, using  the whoami call of the RPC bootparams protocol.

       example# hostconfig='hostconfig -p bootparams -h'

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       hostname(1), domainname(1M), route(1M), attributes(5)

SunOS 5.10							    6 Nov 2000							    hostconfig(1M)