Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

writev(3) [linux man page]

WRITEV(P)						     POSIX Programmer's Manual							 WRITEV(P)

NAME
writev - write a vector SYNOPSIS
#include <sys/uio.h> ssize_t writev(int fildes, const struct iovec *iov, int iovcnt); DESCRIPTION
The writev() function shall be equivalent to write(), except as described below. The writev() function shall gather output data from the iovcnt buffers specified by the members of the iov array: iov[0], iov[1], ..., iov[iovcnt-1]. The iovcnt argument is valid if greater than 0 and less than or equal to {IOV_MAX}, as defined in <limits.h>. Each iovec entry specifies the base address and length of an area in memory from which data should be written. The writev() function shall always write a complete area before proceeding to the next. If fildes refers to a regular file and all of the iov_len members in the array pointed to by iov are 0, writev() shall return 0 and have no other effect. For other file types, the behavior is unspecified. If the sum of the iov_len values is greater than {SSIZE_MAX}, the operation shall fail and no data shall be transferred. RETURN VALUE
Upon successful completion, writev() shall return the number of bytes actually written. Otherwise, it shall return a value of -1, the file- pointer shall remain unchanged, and errno shall be set to indicate an error. ERRORS
Refer to write() . In addition, the writev() function shall fail if: EINVAL The sum of the iov_len values in the iov array would overflow an ssize_t. The writev() function may fail and set errno to: EINVAL The iovcnt argument was less than or equal to 0, or greater than {IOV_MAX}. The following sections are informative. EXAMPLES
Writing Data from an Array The following example writes data from the buffers specified by members of the iov array to the file associated with the file descriptor fd. #include <sys/types.h> #include <sys/uio.h> #include <unistd.h> ... ssize_t bytes_written; int fd; char *buf0 = "short string "; char *buf1 = "This is a longer string "; char *buf2 = "This is the longest string in this example "; int iovcnt; struct iovec iov[3]; iov[0].iov_base = buf0; iov[0].iov_len = strlen(buf0); iov[1].iov_base = buf1; iov[1].iov_len = strlen(buf1); iov[2].iov_base = buf2; iov[2].iov_len = strlen(buf2); ... iovcnt = sizeof(iov) / sizeof(struct iovec); bytes_written = writev(fd, iov, iovcnt); ... APPLICATION USAGE
None. RATIONALE
Refer to write() . FUTURE DIRECTIONS
None. SEE ALSO
readv() , write() , the Base Definitions volume of IEEE Std 1003.1-2001, <limits.h>, <sys/uio.h> COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2003 Edition, Standard for Information Technol- ogy -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html . IEEE
/The Open Group 2003 WRITEV(P)

Check Out this Related Man Page

WRITEV(3P)						     POSIX Programmer's Manual							WRITEV(3P)

PROLOG
This manual page is part of the POSIX Programmer's Manual. The Linux implementation of this interface may differ (consult the correspond- ing Linux manual page for details of Linux behavior), or the interface may not be implemented on Linux. NAME
writev - write a vector SYNOPSIS
#include <sys/uio.h> ssize_t writev(int fildes, const struct iovec *iov, int iovcnt); DESCRIPTION
The writev() function shall be equivalent to write(), except as described below. The writev() function shall gather output data from the iovcnt buffers specified by the members of the iov array: iov[0], iov[1], ..., iov[iovcnt-1]. The iovcnt argument is valid if greater than 0 and less than or equal to {IOV_MAX}, as defined in <limits.h>. Each iovec entry specifies the base address and length of an area in memory from which data should be written. The writev() function shall always write a complete area before proceeding to the next. If fildes refers to a regular file and all of the iov_len members in the array pointed to by iov are 0, writev() shall return 0 and have no other effect. For other file types, the behavior is unspecified. If the sum of the iov_len values is greater than {SSIZE_MAX}, the operation shall fail and no data shall be transferred. RETURN VALUE
Upon successful completion, writev() shall return the number of bytes actually written. Otherwise, it shall return a value of -1, the file- pointer shall remain unchanged, and errno shall be set to indicate an error. ERRORS
Refer to write(). In addition, the writev() function shall fail if: EINVAL The sum of the iov_len values in the iov array would overflow an ssize_t. The writev() function may fail and set errno to: EINVAL The iovcnt argument was less than or equal to 0, or greater than {IOV_MAX}. The following sections are informative. EXAMPLES
Writing Data from an Array The following example writes data from the buffers specified by members of the iov array to the file associated with the file descriptor fd. #include <sys/types.h> #include <sys/uio.h> #include <unistd.h> ... ssize_t bytes_written; int fd; char *buf0 = "short string "; char *buf1 = "This is a longer string "; char *buf2 = "This is the longest string in this example "; int iovcnt; struct iovec iov[3]; iov[0].iov_base = buf0; iov[0].iov_len = strlen(buf0); iov[1].iov_base = buf1; iov[1].iov_len = strlen(buf1); iov[2].iov_base = buf2; iov[2].iov_len = strlen(buf2); ... iovcnt = sizeof(iov) / sizeof(struct iovec); bytes_written = writev(fd, iov, iovcnt); ... APPLICATION USAGE
None. RATIONALE
Refer to write(). FUTURE DIRECTIONS
None. SEE ALSO
readv(), write(), the Base Definitions volume of IEEE Std 1003.1-2001, <limits.h>, <sys/uio.h> COPYRIGHT
Portions of this text are reprinted and reproduced in electronic form from IEEE Std 1003.1, 2003 Edition, Standard for Information Technol- ogy -- Portable Operating System Interface (POSIX), The Open Group Base Specifications Issue 6, Copyright (C) 2001-2003 by the Institute of Electrical and Electronics Engineers, Inc and The Open Group. In the event of any discrepancy between this version and the original IEEE and The Open Group Standard, the original IEEE and The Open Group Standard is the referee document. The original Standard can be obtained online at http://www.opengroup.org/unix/online.html . IEEE
/The Open Group 2003 WRITEV(3P)
Man Page