hpux man page for nfs3_jukebox_delay

nfs3_jukebox_delay(5)						File Formats Manual					     nfs3_jukebox_delay(5)

NAME
       nfs3_jukebox_delay  -  control  the  length  of	time  the  NFS	version  3 client waits before re-transmitting a request after receiving a
       NFS3ERR_JUKEBOX error

VALUES
   Failsafe
   Default
   Allowed values
   Recommended values
       A warning will be issued at runtime if the tunable is set to a value less then 100 hundredths of a second or greater than 60000	hundredths
       of a second since this is outside the tested limits.  This is not a serious warning but just an information message for the administrator.

DESCRIPTION
       controls  the  duration	of  time  that	the NFS version 3 client waits to transmit a new request after receiving the error from a previous
       request. The error, is generally returned from the server when the file is temporarily unavailable for some reason.  These  situations  are
       generally associated with hierarchical storage and CD or tape jukeboxes.

   Who Is Expected to Change This Tunable?
       The distributed file system administrator should examine this value depending on the speed of the storage on the NFS file server.

   Restrictions on Changing
       The tunable is dynamic; tuning will take effect immediately on the running system.

   When Should the Value of This Tunable Be Raised?
       The  value  should  be  increased  if there are long delays in making the file available. This will reduce network overhead due to repeated
       retransmissions.

   What Are the Side Effects of Raising the Value?
       Increasing the delay before retransmission will impact performance if the file unavailability is shorter than the increased delay.

   When Should the Value of This Tunable Be Lowered?
       If the time the file is unavailable is small, then decreasing this value should not impact performance.

   What Are the Side Effects of Lowering the Value?
       If the time the file is unavailable is large, then there will be an increase in network overhead.

WARNINGS
       All HP-UX kernel tunable parameters are release specific.  This parameter may be removed or have its meaning changed in future releases	of
       HP-UX.

       Installation  of  optional  kernel  software, from HP or other vendors, may cause changes to tunable parameter values.  After installation,
       some tunable parameters may no longer be at the default or recommended values.  For information about the effects of installation  on  tun-
       able  values,  consult  the documentation for the kernel software being installed.  For information about optional kernel software that was
       factory installed on your system, see at

AUTHOR
       was developed by Sun Microsystems, Inc.

SEE ALSO
       kctune(1M), sam(1M), gettune(2), settune(2), values(5).

							     Tunable Kernel Parameters					     nfs3_jukebox_delay(5)