DtWsmSetWorkspaceTitle(API) DtWsmSetWorkspaceTitle(API)
NAME
DtWsmSetWorkspaceTitle -- set workspace title
SYNOPSIS
#include <Dt/Wsm.h>
int DtWsmSetWorkspaceTitle(
Widget widget,
Atom workspace,
char *title);
DESCRIPTION
The DtWsmSetWorkspaceTitle() function works with the CDE workspace manager, dtwm(1), and changes a specific workspace's title. Applications
can use this function to implement an interface to the workspace manager.
If the DtWsmSetWorkspaceTitle() function is not successful, the most likely reason for failure is that the CDE workspace manager, dtwm(1),
is not running. The DtWsmSetWorkspaceTitle() function requires a widget. A gadget (or unrealized widget) is not acceptable for the widget
argument.
DtWsmSetWorkspaceTitle() sends a message to the CDE workspace manager, dtwm(1), to set the title. If the workspace name is not valid, no
action is taken and the workspace manager reports no error.
ARGUMENTS
widget A realized widget on the screen of interest
workspace The name of the workspace (in X atom form) where the title should be set
title The new title
RETURN VALUE
The function returns Success (0) when it succeeds, and non-zero upon failure. Note that these are not the same values that _DtWsmSet-
WorkspaceTitle returns.
SEE ALSO DtWsm(5)
"Communicating with the Workspace Manager" section in the CDE Programmer's Guide
"Workspace Manager" section in the CDE Programmer's Overview
DtWsmSetWorkspaceTitle(API)
Check Out this Related Man Page
DtWsmAddWorkspaceFunctions(library call) DtWsmAddWorkspaceFunctions(library call)
NAME
DtWsmAddWorkspaceFunctions -- add workspace functions for a window
SYNOPSIS
#include <Dt/Wsm.h>
void DtWsmAddWorkspaceFunctions(
Display *display,
Window window);
DESCRIPTION
The DtWsmAddWorkspaceFunctions function enables workspace functions for a window. When workspace functions are enabled, the default window
menu for the window displayed by the CDE workspace manager, dtwm(1), shows entries that allow the window to occupy a different set of
workspaces, occupy all workspaces, or be removed from the current workspace.
The display argument is the X display.
The window argument is the window to have its workspace functions enabled.
RETURN VALUE
The DtWsmAddWorkspaceFunctions function returns no value.
APPLICATION USAGE
The application must call the DtWsmAddWorkspaceFunctions function before mapping the window. The CDE workspace manager, dtwm(1), only
looks at the workspace function information at the time the workspace manager manages the window. If the CDE workspace manager, dtwm(1),
is currently managing the window, the application must withdraw the window (see XWithdrawWindow(3)), add the workspace functions, and map
the window once again.
By default, the workspace manager enables workspace functions.
The application should call DtWsmAddWorkspaceFunctions to restore the workspace functions removed by the DtWsmRemoveWorkspaceFunctions(3)
function.
SEE ALSO
Dt/Wsm.h - DtWsm(5), XWithdrawWindow(3), dtwm(1), DtWsmRemoveWorkspaceFunctions(3).
DtWsmAddWorkspaceFunctions(library call)
I'm running Digital Unix True64 system. version4.0. My CDE is shutoff. How can I start the CDE. When I boot my system I don't even get graphic startup picture in the beginn. I've tried to activate thourgh Graphical UI Selection Facility in /usr/sbin/setup.But all I have is alot of inactive... (12 Replies)
This Sun system is having some problems for some time ..
When the m/c was booted first , it showed the CDE login on the screen . So far so good
The trouble starts now . After say one hour of remaining in that state the monitor goes blank . Thats acceptable ..i think it goes to powersave . But... (8 Replies)
I am running Solaris 9 and wanted the CDE stopped when my users login. Can this be done by adding something to the .profile? Basically when they login they should be at the command line and have to start the CDE themselves.
Thanks (11 Replies)
all Freind ,
Nice to be one of the member for this unix forum .
I have problem with machnie ..i using controller C110 for Agilent Tester and using Unix platform .
I have problem when rebooting my system suddenly i can't lunch my CDE to proceed .
Error mesage shown as below :-
**X... (6 Replies)
I've just completed a fresh install of HP-UX 11.0 on my 712/80 and everything starts up fine until it gets to the point where X kicks off and I believe at this point is supposed to launch into the CDE login.
It just sits there on the blank X screen with the X cursor for a minute or so then BEEPS... (9 Replies)
As stated above in the title "How do I establish a remote CDE or JDS session on Solaris 10?"
What I would like to do is be able to login to and use the machine remotely using either the CDE or JDS, preferably with out having to use a VNC, and be able to use the pretty GUI, instead of exclusively... (11 Replies)
Hi.
I just installed the HP-UX 11i V2.
I have problems with CDE - it is inoperative (after logon there is a message box: messaging system failure - or something like that, it asks to check /etc/hosts and network settings).
nslookup works by hostname and IP, hostname shown the correct... (7 Replies)
Hi.
I have HP J5000 workstation with Visualize FX4 graphics card and HP-UX 11.23 64bit.
When system is booting I get:
Start CDE login Server....................OK]
But I don't see that X Windows are starting. The only thing what I get is console login.
Somebody knows how to fix it?
... (7 Replies)
I'm running Solaris 9, using the CDE gui on a SunBlade 100. I want to substitute the generic wallpapers that CDE has, with my own, i.e. my kids, dog, etc.
Suggestions? Directions??
Thanks in advance. (19 Replies)
Hi,
I am a hobbyist with a very old machine I have been trying to get up and running. I have an HP 9000/C240 with 1G of RAM and 3-8.5G HD. It is configured with 1G SWAP/DUMP. Currently only one drive is in use via LVM. I have not gotten around to creating more volumes just yet.
It is running... (11 Replies)
When i start a CDE session on Solaris 9 it starts the Gnome desktop for like five minutes with nothing on the screen except the background then it enters the CDE environment
and when I enter (new session) Gnome environment it takes 5 to 10 minutes then the session starts
so I wounder why it... (8 Replies)
I work for a health care company part of my job is to run checks we use a telnet session that we use AIX 6 commands. I have almost no programming experience but i want to learn it, we have a programmer here but he has no time my question is,, Is there anything that allows you to program a GUI... (7 Replies)
hi,
I have a local.conf file which has the first line
TOPDIR = "/home/mvdev/workspace/boxer". I want to replace the value to
"/home/common/workspace/mirror". I tried the following perl command that is
perl -p -i -e 's/Path/path1/g' myfile.txt then
sed... (7 Replies)
Goodmorning,
I know how to cut a string and a column, and how to find a word.
I have a file with over 100 columns. All columns have a title in the first line. I have to delete all columns with the XXX title.
I can't use cut -f because the position of XXX columns change in each file, and in... (14 Replies)