lpweb(1m) [hpux man page]
lpweb(1M) lpweb(1M) NAME
lpweb - invokes the HP-UX Printer Management tool SYNOPSIS
[ ] [ ] [ ] DESCRIPTION
The HP-UX Printer Management tool ( ) is used to configure the LP spooling sub-system. It allows the user to view and configure Printers and Print Requests. The tool also allows the user to save and restore spooler configuration. The HP-UX Printer Management tool provides both Web-based and terminal user interface. The Web-based interface is launched through the HP System Management Homepage. Superuser privileges are required to access the HP-UX Printer Management tool. An attempt will be made to connect to a Mozilla/Netscape Web browser running on the X server defined by the DISPLAY environment variable. If a running Mozilla/Netscape client is found, it will be used, otherwise a new Mozilla/Netscape session will be initiated. This will only happen if the Mozilla/Netscape process is running in the same system as that referenced by the DISPLAY variable, unless the -F option is used. Note: By default, the HP-UX Printer Management tool ( ) invokes the Mozilla Web browser. If you want to support any other browser (Net- scape), set the BROWSER environment variable as shown below: The terminal user interface is invoked if any of the following conditions are true: o The command is invoked with the option. o The environment variable is not set. The Web-based interface is launched if all the following conditions are true: o The command is invoked with option. o The environment variable is set. o The command is available on the system. Options recognizes the following options: Forces a client browser to be used in less secure ways. The option forces the client browser to be used or started, even when the X-traffic between the X-server and the Mozilla browser is not secure. Use this option only when you are sure the network traffic between the host where Mozilla is running and the host in the DISPLAY variable is secure. If a privileged user (root) executes the command with the option, a temporary login bypass key is generated. The bypass key enables the user to access the Web interface without having to provide login information again. You can also start the HP-UX Printer Management tool using one of the following methods: o Invoke o Invoke the HP-UX Printers and Plotters Configuration tool Web interface by typing the URL in the address bar of your browser, where hostname is the fully qualified name of the server. o Launch the HP-UX Systems Insight Manager on the server and select the Printer Management tool from Configure -> HP-UX Configuration menu Online Help After the HP-UX Printers and Plotters Configuration tool is started, the online help provides details on how to use the tool. RETURN VALUES
Upon completion, lpweb returns one of the following values: o 0 Successful o 1 An error occurred AUTHOR was developed by Hewlett-Packard Company. SEE ALSO
sam(1M), enable(1), lp(1), lpstat(1), accept(1M), lpsched(1M), lpweb(1M)
Check Out this Related Man Page
ncweb(1M) ncweb(1M) NAME
ncweb - launch the Network Interfaces Configuration and Network Services Configuration tools of HP System Management Homepage (HP SMH) SYNOPSIS
DESCRIPTION
The Network Interfaces Configuration and Network Services Configuration tools are system management tools that manage a system by configur- ing network interfaces and network services on HP-UX installed systems. These tools provide both Web-based user interface (GUI) and termi- nal user interface (TUI). The command can launch both the terminal user interface (TUI) and the Web-based interface (GUI) of the Network Interfaces Configuration and Network Services Configuration tools. In the case of TUI, the command launches the Networking and Communications window, from where the user (superuser) can select Network Interfaces Configuration or Network Services Configuration. In the case of GUI, the command launches the Tools page of HP SMH, from where the user (superuser) can select Network Interfaces Configuration or Network Services Configuration. You must have superuser privileges to access the Network Interfaces Configuration and the Network Services Configuration tools. With the Network Interfaces Configuration tool, you can configure the following network interfaces: o Auto Port Aggregation (APA) o Network Interface Cards (NIC) o Remote Direct Memory Access (RDMA) o Virtual LAN (VLAN) o Tunnels Note: APA and VLAN network interfaces are displayed only if the products are installed on the HP-UX system. With the Network Services Configuration tool, you can configure the following network services: o Bootable Devices o DHCPv6 o DNS (BIND) o Hosts o NIS o Name Service Switch o Network Services o Networked File Systems o Routes o System Access o Time When you run it attempts to connect to a Mozilla Web browser running on the X server defined by the environment variable. If finds a run- ning Mozilla client, it uses that client. Otherwise, initiates a new Mozilla session. The new session is initiated only if the Mozilla process is running in the same system as that referenced by the variable, unless the option is used. Note: By default, invokes the Mozilla Web browser. To support any other browser (for example, Netscape), set the environment variable as shown below: The command opens the terminal user interface if any of the following conditions are true: o The command is invoked with the option. o The environment variable is not set. The command opens the Web-based interface if all the following conditions are true: o The command is invoked with option. o The environment variable is set. o The command is available on the system. If the command cannot open the Web-based interface, the command opens the terminal user interface. Options recognizes the following options: Force a client browser to be used in less secure ways. The option forces the use of a client browser, even when the X-traffic between the X-server and the Mozilla browser is not secure. Use the option only when the network traffic between the host where Mozilla is running and the host in the environ- ment variable is secure. The option causes to invoke the Web-based interface of the Network Interfaces Configuration and Network Services Configura- tion tools. If cannot start the Web browser, it starts the terminal interface. Generate a temporary login bypass key. The bypass key enables the privileged user to access the Web interface without having to provide login information again. The option causes to invoke the Web-based interface of the Network Interfaces Configuration and Network Services Configura- tion tools. Open the terminal user interface for managing network interfaces and network services regardless of the current setting of the environment variable. Other Ways to Start the Tools You can also start the Network Interfaces Configuration and Network Services Configuration tools using one of the following methods: o Invoke and select the functional area to launch the terminal user interface or press on the keyboard to launch the Web-based interface. o Type the URL in the address bar of the Web browser to open the Web-based interface. The hostname is the name of the server. o Open the HP-UX Systems Insight Manager on the server and select the Network Configuration tool from the Online Help The online help is available after the Network Interfaces Configuration tool or Network Services Configuration tool is open. The online help provides information on how to use the tool. RETURN VALUES
Upon completion, returns one of the following values: Successful Error Occurred AUTHOR
was developed by Hewlett-Packard. SEE ALSO
sam(1M), smh(1M). ncweb(1M)