getx25(1M)getx25(1M)NAME
getx25 - get x25 line
SYNOPSIS
line speed pad-type
DESCRIPTION
The commands, including are targeted for removal from HP-UX; see the below.
is functionally very similar to (see getty(1M)) but is used only for incoming lines that are connected to an X.25 PAD. It performs special
functions such as setting up an initial PAD configuration. It also logs the number of the caller in The third parameter is the name of the
PAD being used. HP 2334A is the only one supported at this time. A typical invocation would be:
WARNINGS
Use of commands, including is discouraged because they are targeted for removal from HP-UX. Use ftp(1) or rcp(1) instead.
AUTHOR
was developed by HP.
SEE ALSO login(1), uucp(1), getty(1M).
TO BE OBSOLETED getx25(1M)
Check Out this Related Man Page
uugetty(1M)uugetty(1M)NAME
uugetty - set terminal type, modes, speed and line discipline
SYNOPSIS
timeout] line [speed [type [linedisc]]]
file
DESCRIPTION
The commands, including are targeted for removal from HP-UX; see the below.
sets terminal type, modes, speed and line discipline. It is similar to except that supports using the line in both directions (see
getty(1M)). This allows users to log in, but, if the line is free, and can dial out (see uucico(1), cu(1), and ct(1)). When devices are
used with and lock files are created. Therefore, when the call to returns (see open(2)) (or the first character is read when the option is
used), the status of the lock files indicates whether the line is used by or someone trying to log in. See getty(1M) for more information.
Note that with the option, several carriage-return characters might be required before the login message is output. When is trying to log
in, it can be instructed to enter numerous carriage-return characters with the following login script:
where ... represents whatever would normally be used for the login sequence.
An entry for an intelligent modem or direct line that has a on each end must use the option (this causes uugetty to wait to read a charac-
ter before it enters the login message, thus preventing two instances of from looping). If there is a on one end of a direct line, there
must be a on the other end as well.
EXAMPLES
The following line is an entry using on an intelligent modem or direct line:
WARNINGS
Use of commands, including is discouraged because they are targeted for removal from HP-UX. Use ftp(1) or rcp(1) instead.
does not work when is used with an intelligent modem such as a Penril or a Ventel.
FILES SEE ALSO ct(1), cu(1), login(1), uucico(1M), getty(1M), init(1M), ioctl(2), gettydefs(4), inittab(4), tty(7).
Tim O'Reilly and Grace Todino,
O'Reilly & Associates, Inc. USA.
Grace Todino and Dale Dougherty,
O'Reilly & Associates, Inc. USA.
TO BE OBSOLETED uugetty(1M)
Introduction
I have seen some misinformation regarding Unix file permissions. I will try to set the record straight. Take a look at this example of some output from ls:
$ ls -ld /usr/bin /usr/bin/cat
drwxrwxr-x 3 root bin 8704 Sep 23 2004 /usr/bin
-r-xr-xr-x 1 bin bin ... (6 Replies)
I used to use ls -l cut to detrmine file size, and google searches didn't come up with anything else but 'stat' which doesn't appear on HPUX.
I discovered the humble 'wc -c' which does this job very neatly, and thought I would share it. (7 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello guys,
I have problem with hpux shell script. I have one big text file that contains like
SOH
bla bla bla
bla bla bla
ETX SOH
bla bla bla
ETX
SOH
bla bla bla
ETX
What I need to do is save first SOH*BLA into file1.txt, save second SOH*BLA into file2.txt and so on.... (17 Replies)
Hi,
I am very new to HP-UX, and we're going to be doing a SAN migration.
We're going to take down the machine, and zone it to the new SAN.
My question is, will the device names change and will that interfere with the LVM?
If the new disks come in with different device names, how would I... (3 Replies)
i want to extract specific region of interest from big file. i have only start position, end position and seq id, see my query is:
I have file1 is this
>GL3482.1
GAACTTGAGATCCGGGGA
GCAGTGGATCTCCACCAG
CGGCCAGAACTGGTGCAC
CTCCAGGCCAGCCTCGTC
CTGCGTGTC
>GL3550.1... (14 Replies)
I require Hpux 11iv3 administration document if anyone could assist with the same it would be a great help. The Hp site does not have any consolidated document that could be referred to. I require something in line that could assist with network configuration and more. I require the same for Build... (3 Replies)
Got a raise and a formal position of 'unix system engineer' in 2016.
I would like to thank you members and admins.
This would not be possible without you.
I will mention some..
Thank you Don, for making me learn and understand the importance of standards, which i try to apply as much as i... (3 Replies)
Greetings Experts,
As part of automating the sql generation, I have the source table name, target table name, join condition stored in a file join_conditions.txt which is a delimited file (I can edit the file if for any reason). The reason I needed to store is I have built SELECT list without... (5 Replies)
Hi ,
I have to use HP-unix OS to get difference between 2 files.while i tried a piece of code in other OS(linux/unix) as below, it worked fine & the output is desired one.
diff --suppress-common-lines -y file_1 file_2 >d.txt
The same doesn't works in HP -unix. Any help shall be... (6 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Back in my early days, just starting at my first job where I was doing 100% UNIX...
We had a mixture of Solaris, AIX, and HPUX systems. Our most critical systems (Logistics) was running on a bunch of large HP 9000 servers. I was tasked with decommisoning one of the servers.
It was one... (5 Replies)
Hello!
Yesterday we added over 10,000 PHP man pages to our man page section.
I've not yet got our unique and special recursive search feature working; but you can still access the PHP man pages directly by selecting PHP in the man sets drop down menu (left side) and then section 3 (right... (3 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)