FSCK_FFS(8) BSD System Manager's Manual FSCK_FFS(8)
fsck_ffs, fsck_ufs -- file system consistency check and interactive repair
fsck_ffs [-BEFfnpRryZ] [-b block] [-c level] [-m mode] filesystem ...
The specified disk partitions and/or file systems are checked. In "preen" or "check clean" mode the clean flag of each file system's
superblock is examined and only those file systems that are not marked clean are checked. File systems are marked clean when they are
unmounted, when they have been mounted read-only, or when fsck_ffs runs on them successfully. If the -f option is specified, the file sys-
tems will be checked regardless of the state of their clean flag.
The kernel takes care that only a restricted class of innocuous file system inconsistencies can happen unless hardware or software failures
intervene. These are limited to the following:
Link counts in inodes too large
Missing blocks in the free map
Blocks in the free map also in files
Counts in the super-block wrong
These are the only inconsistencies that fsck_ffs with the -p option will correct; if it encounters other inconsistencies, it exits with an
abnormal return status and an automatic reboot will then fail. For each corrected inconsistency one or more lines will be printed identify-
ing the file system on which the correction will take place, and the nature of the correction. After successfully correcting a file system,
fsck_ffs will print the number of files on that file system, the number of used and free blocks, and the percentage of fragmentation.
If sent a QUIT signal, fsck_ffs will finish the file system checks, then exit with an abnormal return status that causes an automatic reboot
to fail. This is useful when you want to finish the file system checks during an automatic reboot, but do not want the machine to come up
multiuser after the checks complete.
If fsck_ffs receives a SIGINFO (see the ``status'' argument for stty(1)) signal, a line will be written to the standard output indicating the
name of the device currently being checked, the current phase number and phase-specific progress information.
Without the -p option, fsck_ffs audits and interactively repairs inconsistent conditions for file systems. If the file system is inconsis-
tent the operator is prompted for concurrence before each correction is attempted. It should be noted that some of the corrective actions
which are not correctable under the -p option will result in some loss of data. The amount and severity of data lost may be determined from
the diagnostic output. The default action for each consistency correction is to wait for the operator to respond yes or no. If the operator
does not have write permission on the file system fsck_ffs will default to a -n action.
The following flags are interpreted by fsck_ffs:
-B A check is done on the specified and possibly active file system. The set of corrections that can be done is limited to those done
when running in preen mode (see the -p flag). If unexpected errors are found, the file system is marked as needing a foreground
check and fsck_ffs exits without attempting any further cleaning.
-E Clear unallocated blocks, notifying the underlying device that they are not used and that their contents may be discarded. This is
useful for filesystems which have been mounted on systems without TRIM support, or with TRIM support disabled, as well as filesystems
which have been copied from one device to another.
See the -E and -t flags of newfs(8), and the -t flag of tunefs(8).
-F Determine whether the file system needs to be cleaned immediately in foreground, or if its cleaning can be deferred to background.
To be eligible for background cleaning it must have been running with soft updates, not have been marked as needing a foreground
check, and be mounted and writable when the background check is to be done. If these conditions are met, then fsck_ffs exits with a
zero exit status. Otherwise it exits with a non-zero exit status. If the file system is clean, it will exit with a non-zero exit
status so that the clean status of the file system can be verified and reported during the foreground checks. Note that when invoked
with the -F flag, no cleanups are done. The only thing that fsck_ffs does is to determine whether a foreground or background check
is needed and exit with an appropriate status code.
-b Use the block specified immediately after the flag as the super block for the file system. An alternate super block is usually
located at block 32 for UFS1, and block 160 for UFS2.
See the -N flag of newfs(8).
-C Check if file system was dismounted cleanly. If so, skip file system checks (like "preen"). However, if the file system was not
cleanly dismounted, do full checks, as if fsck_ffs was invoked without -C.
-c Convert the file system to the specified level. Note that the level of a file system can only be raised. There are currently four
0 The file system is in the old (static table) format.
1 The file system is in the new (dynamic table) format.
2 The file system supports 32-bit uid's and gid's, short symbolic links are stored in the inode, and directories have an added
field showing the file type.
3 If maxcontig is greater than one, build the free segment maps to aid in finding contiguous sets of blocks. If maxcontig is
equal to one, delete any existing segment maps.
In interactive mode, fsck_ffs will list the conversion to be made and ask whether the conversion should be done. If a negative
answer is given, no further operations are done on the file system. In preen mode, the conversion is listed and done if possible
without user interaction. Conversion in preen mode is best used when all the file systems are being converted at once. The format
of a file system can be determined from the first line of output from dumpfs(8).
This option implies the -f flag.
-f Force fsck_ffs to check 'clean' file systems when preening.
-m Use the mode specified in octal immediately after the flag as the permission bits to use when creating the lost+found directory
rather than the default 1777. In particular, systems that do not wish to have lost files accessible by all users on the system
should use a more restrictive set of permissions such as 700.
-n Assume a no response to all questions asked by fsck_ffs except for 'CONTINUE?', which is assumed to be affirmative; do not open the
file system for writing.
-p Preen file systems (see above).
-R Instruct fsck_ffs to restart itself if it encounters certain errors that warrant another run. It will limit itself to a maximum of
10 restarts in a given run in order to avoid an endless loop with extremely corrupted filesystems.
-r Free up excess unused inodes. Decreasing the number of preallocated inodes reduces the running time of future runs of fsck_ffs and
frees up space that can allocated to files. The -r option is ignored when running in preen mode.
-S Surrender on error. With this flag enabled, a hard error returned on disk i/o will cause fsck_ffs to abort instead of continuing on
and possibly tripping over more i/o errors.
-y Assume a yes response to all questions asked by fsck_ffs; this should be used with great caution as this is a free license to con-
tinue after essentially unlimited trouble has been encountered.
-Z Similar to -E, but overwrites unused blocks with zeroes. If both -E and -Z are specified, blocks are first zeroed and then erased.
Inconsistencies checked are as follows:
1. Blocks claimed by more than one inode or the free map.
2. Blocks claimed by an inode outside the range of the file system.
3. Incorrect link counts.
4. Size checks:
Directory size not a multiple of DIRBLKSIZ.
Partially truncated file.
5. Bad inode format.
6. Blocks not accounted for anywhere.
7. Directory checks:
File pointing to unallocated inode.
Inode number out of range.
Directories with unallocated blocks (holes).
Dot or dot-dot not the first two entries of a directory or having the wrong inode number.
8. Super Block checks:
More blocks for inodes than there are in the file system.
Bad free block map format.
Total free block and/or free inode count incorrect.
Orphaned files and directories (allocated but unreferenced) are, with the operator's concurrence, reconnected by placing them in the
lost+found directory. The name assigned is the inode number. If the lost+found directory does not exist, it is created. If there is insuf-
ficient space its size is increased.
The full foreground fsck_ffs checks for many more problems that may occur after an unrecoverable disk write error. Thus, it is recommended
that you perform foreground fsck_ffs on your systems periodically and whenever you encounter unrecoverable disk write errors or file-sys-
/etc/fstab contains default list of file systems to check.
The fsck_ffs utility exits 0 on success, and >0 if an error occurs.
If the option -F is used, fsck_ffs exits 7 if the file system is clean.
The diagnostics produced by fsck_ffs are fully enumerated and explained in Appendix A of Fsck - The UNIX File System Check Program.
fs(5), fstab(5), fsck(8), fsdb(8), newfs(8), reboot(8)
July 30, 2013 BSD