ACPI_TOSHIBA(4) BSD Kernel Interfaces Manual ACPI_TOSHIBA(4)NAME
acpi_toshiba -- Toshiba HCI interface
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device acpi_toshiba
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
acpi_toshiba_load="YES"
DESCRIPTION
HCI is Toshiba's Hardware Control Interface which is somewhat uniform across their models. The acpi_toshiba driver allows the user to manip-
ulate HCI-controlled hardware using a number of sysctl(8) variables.
SYSCTL VARIABLES
The following sysctls are currently implemented:
hw.acpi.toshiba.force_fan
Causes active cooling to be forcibly enabled ('1') or disabled ('0') regardless of the current temperature.
hw.acpi.toshiba.video_output
Sets the active display to use according to a bitwise OR of the following:
0 No display
1 LCD
2 CRT
4 TV-Out
Only some systems (i.e., the Libretto L5) support video switching via this hardware-specific driver. Use the acpi_video(4) driver
for generic video output support.
hw.acpi.toshiba.lcd_brightness
Makes the LCD backlight brighter or dimmer (higher values are brighter).
hw.acpi.toshiba.lcd_backlight
Turns the LCD backlight on and off.
hw.acpi.toshiba.cpu_speed
Sets the CPU speed to the specified speed. This provides functionality similar to the hw.acpi.cpu.throttle_state variable. Higher
sysctl values mean lower CPU speeds.
Defaults for these variables can be set in sysctl.conf(5), which is parsed at boot-time.
LOADER TUNABLES
The hw.acpi.toshiba.enable_fn_keys tunable enables or disables the function keys on the keyboard. Function keys are enabled by default.
This behaviour can be changed at the loader(8) prompt or in loader.conf(5).
SEE ALSO acpi(4), acpi_video(4), loader.conf(5), sysctl.conf(5), sysctl(8)HISTORY
The acpi_toshiba driver first appeared in FreeBSD 5.1.
AUTHORS
The acpi_toshiba driver was written by Hiroyuki Aizu <aizu@navi.org>. This manual page was written by Philip Paeps <philip@FreeBSD.org>.
BSD February 8, 2010 BSD
Check Out this Related Man Page
ACPI_PANASONIC(4) BSD/i386 Kernel Interfaces Manual ACPI_PANASONIC(4)NAME
acpi_panasonic -- ACPI hotkey driver for Panasonic laptops
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device acpi_panasonic
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
acpi_panasonic_load="YES"
DESCRIPTION
The acpi_panasonic driver enables such hotkey facilities of various Panasonic laptops as changing LCD brightness, controlling mixer volumes,
entering sleep or suspended state and so on. On the following models it is reported to work: Let's note (or Toughbook, outside Japan) CF-
R1N, CF-R2A and CF-R3. It may also work on other models as well.
The driver consists of three functionalities. The first is to detect hotkey events and take corresponding actions, which include changing
LCD luminance and speaker mute state. The second role is to notify occurrences of the event by way of devctl(4) and eventually to devd(8).
The third and last is to provide a way to adjust LCD brightness and sound mute state via sysctl(8).
Hotkeys
There are 9 hotkeys available on the supported hardwares:
Fn+F1 Make LCD backlight darker.
Fn+F2 Make LCD backlight brighter.
Fn+F3 Switch video output between LCD and CRT. Not supported by the acpi_panasonic driver.
Fn+F4 Toggle muting the speaker.
Fn+F5 Turn the mixer volume down.
Fn+F6 Turn the mixer volume up.
Fn+F7 Enter suspend-to-RAM state.
Fn+F9 Show battery status.
Fn+F10 Enter suspend-to-disk state.
Actions are automatically taken within the driver for Fn+F1, Fn+F2 and Fn+F4. For the other events such as mixer control and showing battery
status, devd(8) should take the role as described below.
devd(8) Events
When notified to devd(8), the hotkey event provides the following information:
system "ACPI"
subsystem "Panasonic"
type The source of the event in ACPI namespace. The value depends on the model but typically "\_SB_.HKEY".
notify Event code (see below).
Event codes to be generated are assigned as follows:
0x81-0x86, 0x89
Fn+F<n> pressed. 0x81 corresponds to Fn+F1, 0x82 corresponds to Fn+F2, and so on.
0x01-0x07, 0x09, 0x1a
Fn+F<n> released. 0x01 corresponds to Fn+F1, 0x02 corresponds to Fn+F2, and so on.
SYSCTL VARIABLES
The following MIBs are available:
hw.acpi.panasonic.lcd_brightness_max
The maximum level of brightness. The value is read only and automatically set according to hardware model.
hw.acpi.panasonic.lcd_brightness_min
The minimum level of brightness. The value is read only and automatically set according to hardware model.
hw.acpi.panasonic.lcd_brightness
Current brightness level of the LCD (read-write). The value ranges from hw.acpi.panasonic.lcd_brightness_min to
hw.acpi.panasonic.lcd_brightness_max.
hw.acpi.panasonic.sound_mute
A read-write boolean flag to control whether to mute the speaker. The value 1 means to mute and 0 not.
SEE ALSO acpi(4), devd.conf(5), devd(8), sysctl(8)HISTORY
The acpi_panasonic driver first appeared in FreeBSD 5.3.
AUTHORS
The acpi_panasonic driver and this manual page were written by OGAWA Takaya <t-ogawa@triaez.kaisei.org> and TAKAHASHI Yoshihiro
<nyan@FreeBSD.org>.
BSD September 17, 2009 BSD