mode3(8) [debian man page]

mode3(8)							Svgalib User Manual							  mode3(8)

NAME

       mode3 - set a vesa mode.

SYNOPSIS

       mode3 [modenum]

DESCRIPTION

       The video card is set to vesa mode modenum (or 3 by default) using the (real mode) vesa bios calls.

BUGS

       Using  this program is unsafe, and might (depending on the bios) result in a video card in a state that requires a hard reset to restore to
       normal, or even a hung computer.

Svgalib (>;= 1.4.0)						    11 Mar 1999 							  mode3(8)

VESA(4)                                                      Kernel Interfaces Manual                                                      VESA(4)

NAME

       vesa - Generic VESA video driver

SYNOPSIS

       Section "Device"
         Identifier "devname"
         Driver "vesa"
         ...
       EndSection

DESCRIPTION

       vesa  is an Xorg driver for generic VESA video cards.  It can drive most VESA-compatible video cards, but only makes use of the basic stan-
       dard VESA core that is common to these cards.  The driver supports depths 8, 15 16 and 24.

SUPPORTED HARDWARE

       The vesa driver supports most VESA-compatible video cards.  There are some known exceptions, and those should be listed here.

CONFIGURATION DETAILS

       Please refer to xorg.conf(5) for general configuration details.  This section only covers configuration details specific to this driver.

       The driver auto-detects the presence of VESA-compatible hardware.  The ChipSet name may optionally be specified in the config file "Device"
       section, and will override the auto-detection:

           "vesa"

       The following driver Options are supported:

       Option "ShadowFB" "boolean"
              Enable or disable use of the shadow framebuffer layer.  Default: on.

              This option is recommended for performance reasons.

       Option "ModeSetClearScreen" "boolean"
              Clear the screen on mode set. Some BIOSes seem to be broken in the sense that the newly set video mode is bogus if they are asked to
              clear the screen during mode setting. If you experience problems try to turn this option off. Default: on.

SEE ALSO

       Xorg(1), xorg.conf(5), Xserver(1), X(7)

AUTHORS

       Authors include: Paulo Ce'sar Pereira de Andrade.

X Version 11                                                   xf86-video-vesa 2.3.1                                                       VESA(4)