IP-NTABLE(8) Linux IP-NTABLE(8)NAME
ip-ntable - neighbour table configuration
SYNOPSIS
ip [ OPTIONS ] address { COMMAND | help }
ip ntable change name NAME [ dev DEV ] PARMS
PARMS := { thresh1 VAL | thresh2 VAL | thresh3 VAL | gc_int MSEC | base_reachable MSEC | retrans MSEC | gc_stale MSEC | delay_probe MSEC |
queue LEN | app_probs VAL | ucast_probes VAL | mcast_probes VAL | anycast_delay MSEC | proxy_delay MSEC | proxy_queue LEN |
locktime MSEC }
ip ntable show [ dev DEV ] [ name NAME ]
DESCRIPTION
ip ntable controls the parameters for the neighbour tables.
ip ntable show - list the ip neighbour tables
This commands displays neighbour table parameters and statistics.
dev DEV
only list the table attached to this device.
name NAME
only lists the table with the given name.
ip ntable change - modify table parameter
This command allows modifying table parameters such as timers and queue lengths.
name NAME
the name of the table to modify.
dev DEV
the name of the device to modify the table values.
EXAMPLES
ip ntable show dev eth0
Shows the neighbour table (IPv4 ARP and IPv6 ndisc) parameters on device eth0.
ip ntable change name arp_cache queue 8 dev eth0
Changes the number of packets queued while address is being resolved from the default value (3) to 8 packets.
SEE ALSO ip(8)AUTHOR
Manpage by Stephen Hemminger
iproute2 20 Dec 2011 IP-NTABLE(8)
Check Out this Related Man Page
IP-NTABLE(8) Linux IP-NTABLE(8)NAME
ip-ntable - neighbour table configuration
SYNOPSIS
ip [ OPTIONS ] address { COMMAND | help }
ip ntable change name NAME [ dev DEV ] PARMS
PARMS := { thresh1 VAL | thresh2 VAL | thresh3 VAL | gc_int MSEC | base_reachable MSEC | retrans MSEC | gc_stale MSEC | delay_probe MSEC |
queue LEN | app_probs VAL | ucast_probes VAL | mcast_probes VAL | anycast_delay MSEC | proxy_delay MSEC | proxy_queue LEN |
locktime MSEC }
ip ntable show [ dev DEV ] [ name NAME ]
DESCRIPTION
ip ntable controls the parameters for the neighbour tables.
ip ntable show - list the ip neighbour tables
This commands displays neighbour table parameters and statistics.
dev DEV
only list the table attached to this device.
name NAME
only lists the table with the given name.
ip ntable change - modify table parameter
This command allows modifying table parameters such as timers and queue lengths.
name NAME
the name of the table to modify.
dev DEV
the name of the device to modify the table values.
EXAMPLES
ip ntable show dev eth0
Shows the neighbour table (IPv4 ARP and IPv6 ndisc) parameters on device eth0.
ip ntable change name arp_cache queue 8 dev eth0
Changes the number of packets queued while address is being resolved from the default value (3) to 8 packets.
SEE ALSO ip(8)AUTHOR
Manpage by Stephen Hemminger
iproute2 20 Dec 2011 IP-NTABLE(8)
Hi all,
I've been assigned the task of modifying a script which reads in names of tables from a list file, exports a 30 days worth of data from these tables, then deletes the table. The list file will now contain a table name and a number next to it indicating how many days to archive. I need... (1 Reply)
I have a value
VAL=XXXX_20061001_00 XXXX_20061001_03 XXXX_20061001_00 XXXX_20061002_00 XXXX_20061002_03 XXXX_20061003_00
The VAL has duplicates like XXXX_20061001_00 repeated twice.
How to make the VAL with unique values.
Thanks in advance. (6 Replies)
HI,
When I do 'service network restart' , I am getting the following error.
"3c501 device eth0 does not seem to be present, delaying initialization"
Can any one suggest me the cause/solution for this?
When I do 'lspci' it is showing the ehternet card as
" Ethernet controller"Marvell... (2 Replies)
Hi all,
My directory structure is as follows
home /md/DEV/SCRIPTS/DAILY and home/md/DEV/MIS/LANDING
so this command
find home/md/DEV/MIS/LANDING -name MIS_Customer_\*
is giving me the desired output
... (1 Reply)
I need a script that will always return an engine of table, which not
depends on the table structure.
I need it to be done exactly from the "show create table ..." statement.
If there is a easiest way, except "show table status", please write.
mysql -u root db -sBe "show create table... (1 Reply)
Hi
Is there any specific way to FTP a C executable from DEV to PROD. We recently changed a C program compiled in DEV, created EXE and tested fine. But when we moved the EXE to PROD. It did not work. We have tried restarting the sever too. Once we put back the old Exe it starts to work again. The... (1 Reply)
Hi.
I have a file with the following structer:
DB DISK LOCATION SIZE
============================================
PROD DATA_01 /dev/dm-23 10
PROD DATA_02 /dev/dm-24 10
PROD DATA_03 /dev/dm-25 10
DEV DATA_04 /dev/dm-26 10
DEV DATA_05 ... (1 Reply)
hi all,
i have a file named VAL
cat VAL
@905544|0|{5|1|-1|-1|-1|1247559121|}
the value which changes in this is 905544.
i want to replace this '905544' value by other value say '905600'
i am trying this
i have taken this value '905544' to a file named $Curr
and to be... (6 Replies)
I have this simple script:
read VAL
echo "got '$VAL', return is $?"
exit 42 When I comment out 'read', it works as expected: $ bash < rdtest.sh
got '', return is 0
$ echo $?
42
$ ksh < rdtest.sh
got '', return is 0
$ echo $?
42
$ ...but if read is not commented, suddenly it doesn't... (6 Replies)
how to use sed to put .txt end of line..my input file below
file1
make=^bak12^".
DEV=LONG^cmd/usr/bak/ade4^"
.....................................
file 2
make=^and_LONG/bak12^".
DEV=LONG^cmd/usr/bak/ban3^"
..........................................
file 3... (6 Replies)
hey,
I have this file:
ATOM 2510 HG12 VAL 160 8.462 15.861 1.637
ATOM 2511 HG13 VAL 160 9.152 14.510 0.725
ATOM 2512 CG2 VAL 160 6.506 16.579 -0.088
ATOM 2513 HG21 VAL 160 5.499 16.421 -0.478
ATOM 2514 HG22 VAL 160 6.417 16.984 ... (4 Replies)
I have file that looks like:
ATOM 2517 O VAL 160 8.337 12.679 -2.487
ATOM 2518 OXT VAL 160 7.646 12.461 -0.386
TER
ATOM 2519 N VAL 161 -14.431 5.789 -25.371
ATOM 2520 H1 VAL 161 -15.336 5.698 -25.811
ATOM 2521 H2 VAL 161 -13.416 10.529 17.708
ATOM 2522 H3 VAL 161 -14.363 ... (4 Replies)
Question:
How to search & list subdirectories with the given file name?
For example:
The directory structure looks like;
/Builds/DEV/Build_RL01/DDL/
a_tbl_cre.sql
......
/Builds/DEV/Build_RL01/DML/
a_upd.sql
....
....
Requirements:
1. I need to find subdirectory DML which is... (0 Replies)
Hello;
I have a 11.31 system suddenly exhibiting a jump in the GBL_SYS_CALL_RATE in ovpa but all other stats look normal..
Traditional thinking is that this is caused by Apps code change
but our DEV team said none was implemented.
Normally one would expect to find corresponding increase in... (2 Replies)
i've read somewhere a long time ago that there's a way to hide the workings of a script in sub functions so that when run, it doesn't show up in the process table.
is this really possible?
for instance, i need to run a command that has a password in it. and when that;s being run, it can be... (2 Replies)