oss_ali5455(7) OSS Devices oss_ali5455(7)NAME
oss_ali5455 - ALIM5455 audio driver.
DESCRIPTION
Open Sound System driver for onboard audio on ALI M5455 motherboards. This driver is very similar to the Intel ICH driver.
ALI 5455 device characteristics:
o 8/16 bit playback/record
o mono/stereo/4/5.1 channel playback/recording
o 8KHz to 48Khz sample rate.
OPTIONS
None
FILES
/etc/oss4/conf/oss_ali5455.conf Device configuration file
AUTHOR
4Front Technologies
16 December 2012 oss_ali5455(7)
Check Out this Related Man Page
oss_audigyls(7) OSS Devices oss_audigyls(7)NAME
oss_audigyls - Creative Labs CA106 (AudigyLS/SBLive 24bit) driver.
DESCRIPTION
Open Sound System driver for Creative Labs Audigy2-LS and SBLive 24bit 7.1 soundcards.
Audigy-LS device characteristics:
o 8/16/24 bit playback/record
o mono/stereo/4/5.1 playback
o 8KHz to 192Khz sample rate.
AUDIGYLS MODELS
There are 2 models of the AudigyLS device: one with an AC97 codec called the AudigyLS and the one without called the SBLive 7.1. Essen-
tially they are the same chip but behave a bit differently.
When playing AC3 on the AudigyLS (the one with the AC97 mixer) - you need to ensure that the igain slider is set to 0.
AUDIGYLS MIXER
o The AudigyLS has 4 mixer controls for each channel.
o The "spread" button will simply duplicate the front audio on the other 3 channels so that every speaker is playing what the front L/R is
playing.
o LoopBack recording allows you to capture any channel that's playing audio.
o Record Volume slider just adjusts the input gain.
o Record Source selector selects the input.
o The "recmon" button enables a passthrough of the analog input signal.
o Monitor Volume slider sets the passthrough gain if recmon is enabled.
OPTIONS
o audigyls_spdif_enable=0|1 The Audigy LS has a versa-jack (orange) that can be set as SPDIF output or the Side-Surround left/right speak-
ers in a 7.1 setup. When set as SPDIF, you can get play PCM/AC3 audio to a Dolby(R) capable receiver.
FILES
/etc/oss4/conf/oss_audigyls.conf Device configuration file
AUTHOR
4Front Technologies
16 December 2012 oss_audigyls(7)
I have a huge matrix file containing some 1.5 million rows and 6000 columns. The matrix looks something like this:
1 2 3
4 5 6
7 8 9
3 4 5
I want to add all the numbers in the columns of this matrix and display the result to my stdout. This means that the numbers in the first column are:
... (2 Replies)
Hi,
Just trying to get to grips with sed and awk for some reporting for work and I need some assistance:
I have a file that lists policy names on the first line and then on the second line whether the policy is active or not.
Policy Name: Policy1
Active: yes
Policy... (8 Replies)
version info :
vi availabe with RHEL 5.4
I have a text file with 10,000 lines. I want to copy lines from 5000th line to 7000th and redirect to a file. Any idea how I can do this?
Note:
The above scenario is just an example. In my actual requirement, the file has 14 million lines and I want... (9 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello,
I couldn't find an actual introduction thread, so I decided to just put this here.
I go by d0wngrade online. I have been programming in multiple languages for about 15+ years. I started with standard web design languages like HTML and CSS, but I then advanced from design to development... (2 Replies)
Hi guys...
The first active code line in AudioScope.sh is set -u .
This causes a complete exit if a variable is used/found but has not been allocated at the start of the program.
However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Hi.
In thread https://www.unix.com/shell-programming-and-scripting/267833-grouping-counting.html rovf and I had a mini-discussion on grep and awk.
Here is a demo script that compares the awk and grep approaches for this single problem:
#!/usr/bin/env bash
# @(#) s2 Demonstrate group... (1 Reply)
Hello,
I have to fish out some specific columns from a file based on the header value. I have the list of columns I need in a different file. I thought I could read in the list of headers I need,
# file with header names of required columns in required order
headers_file=$2
# read contents... (11 Replies)
For those interested in installing dash shell on OSX Lion to help test POSIX compliancy of shell scripts, it is quite easy. I did it like this:
If you don't have gcc on your system:
0. Download and install the Command Line Tools for Xcode package from Sign In - Apple *
1. Download the dash... (2 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
I have data of an excel files as given below,
file1
org1_1 1 1 2.5 100
org1_2 1 2 5.5 98
org1_3 1 3 7.2 88
file2
org2_1 1 1 2.5 100
org2_2 1 2 5.5 56
org2_3 1 3 7.2 70
I have multiple excel files as above shown.
I have to copy column 1, column 4 and paste into a new excel file as... (26 Replies)
Dear All,
Taking a break from Vue.js coding for the site, SEO and YT videos; and hopefully addressing some well deserved criticism from some here that I have been too focused on the visual aspects of the forums versus the substance and the community....
While the "current generation... (9 Replies)
Hi all...
Well guys and gals, I jumped in at the deep end and found things that PERL cannot do by default.
Many tricky terminal escape codes are not catered for so I had to create workarounds.
One thing I searched for was this:
Passing perl variable to shell command
AND, @Neo this was... (15 Replies)