Login or Register to Ask a Question and Join Our Community

Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

ocf_heartbeat_iscsitarget(7) [debian man page]

OCF_HEARTBEAT_ISCSIT(7) 					OCF resource agents					   OCF_HEARTBEAT_ISCSIT(7)

NAME

       ocf_heartbeat_iSCSITarget - iSCSI target export agent

SYNOPSIS

       iSCSITarget [start | stop | monitor | meta-data | validate-all]

DESCRIPTION

       Manages iSCSI targets. An iSCSI target is a collection of SCSI Logical Units (LUs) exported via a daemon that speaks the iSCSI protocol.

SUPPORTED PARAMETERS

       implementation
	   The iSCSI target daemon implementation. Must be one of "iet", "tgt", or "lio". If unspecified, an implementation is selected based on
	   the availability of management utilities, with "iet" being tried first, then "tgt", then "lio".  (optional, string, no default)

       iqn
	   The target iSCSI Qualified Name (IQN). Should follow the conventional "iqn.yyyy-mm.<reversed domain name>[:identifier]" syntax.
	   (unique, required, string, no default)

       tid
	   The iSCSI target ID. Required for tgt.  (unique, optional, integer, no default)

       portals
	   iSCSI network portal addresses. Not supported by all implementations. If unset, the default is to create one portal that listens on .
	   (optional, string, default 0.0.0.0:3260)

       allowed_initiators
	   Allowed initiators. A space-separated list of initiators allowed to connect to this target. Initiators may be listed in any syntax the
	   target implementation allows. If this parameter is empty or not set, access to this target will be allowed from any initiator.
	   (optional, string, no default)

       incoming_username
	   A username used for incoming initiator authentication. If unspecified, allowed initiators will be able to log in without
	   authentication. This is a unique parameter, as it not allowed to re-use a single username across multiple target instances.	(unique,
	   optional, string, no default)

       incoming_password
	   A password used for incoming initiator authentication.  (optional, string, no default)

       additional_parameters
	   Additional target parameters. A space-separated list of "name=value" pairs which will be passed through to the iSCSI daemon's
	   management interface. The supported parameters are implementation dependent. Neither the name nor the value may contain whitespace.
	   (optional, string, no default)

SUPPORTED ACTIONS

       This resource agent supports the following actions (operations):

       start
	   Starts the resource. Suggested minimum timeout: 10.

       stop
	   Stops the resource. Suggested minimum timeout: 10.

       status
	   Suggested minimum timeout: 10. Suggested interval: 10.

       monitor
	   Performs a detailed status check. Suggested minimum timeout: 10. Suggested interval: 10.

       meta-data
	   Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.

       validate-all
	   Performs a validation of the resource configuration. Suggested minimum timeout: 10.

EXAMPLE

       The following is an example configuration for a iSCSITarget resource using the crm(8) shell:

	   primitive p_iSCSITarget ocf:heartbeat:iSCSITarget 
	     params 
	       iqn=string 
	     op monitor timeout="10" interval="10" depth="0"

SEE ALSO

       http://www.linux-ha.org/wiki/iSCSITarget_(resource_agent)

AUTHOR

       Linux-HA contributors (see the resource agent source for information about individual authors)

resource-agents UNKNOWN 					    03/09/2014						   OCF_HEARTBEAT_ISCSIT(7)

Check Out this Related Man Page

OCF_HEARTBEAT_ISCSI(7)						OCF resource agents					    OCF_HEARTBEAT_ISCSI(7)

NAME

       ocf_heartbeat_iscsi - Manages a local iSCSI initiator and its connections to iSCSI targets

SYNOPSIS

       iscsi [start | stop | status | monitor | validate-all | methods | meta-data]

DESCRIPTION

       OCF Resource Agent for iSCSI. Add (start) or remove (stop) iSCSI targets.

SUPPORTED PARAMETERS

       portal
	   The iSCSI portal address in the form: {ip_address|hostname}[":"port] (required, string, no default)

       target
	   The iSCSI target IQN. (required, string, no default)

       discovery_type
	   Target discovery type. Check the open-iscsi documentation for supported discovery types. (optional, string, default sendtargets)

       iscsiadm
	   open-iscsi administration utility binary. (optional, string, default iscsiadm)

       udev
	   If the next resource depends on the udev creating a device then we wait until it is finished. On a normally loaded host this should be
	   done quickly, but you may be unlucky. If you are not using udev set this to "no", otherwise we will spin in a loop until a timeout
	   occurs. (optional, string, default yes)

SUPPORTED ACTIONS

       This resource agent supports the following actions (operations):

       start
	   Starts the resource. Suggested minimum timeout: 120.

       stop
	   Stops the resource. Suggested minimum timeout: 120.

       status
	   Performs a status check. Suggested minimum timeout: 30.

       monitor
	   Performs a detailed status check. Suggested minimum timeout: 30. Suggested interval: 120.

       validate-all
	   Performs a validation of the resource configuration. Suggested minimum timeout: 5.

       methods
	   Suggested minimum timeout: 5.

       meta-data
	   Retrieves resource agent metadata (internal use only). Suggested minimum timeout: 5.

EXAMPLE

       The following is an example configuration for a iscsi resource using the crm(8) shell:

	   primitive example_iscsi ocf:heartbeat:iscsi 
	     params 
	       portal=string 
	       target=string 
	     op monitor depth="0" timeout="30" interval="120"

SEE ALSO

       http://www.linux-ha.org/wiki/iscsi_(resource_agent)

AUTHOR

       Linux-HA contributors (see the resource agent source for information about individual authors)

resource-agents 1.0.3						    07/05/2010						    OCF_HEARTBEAT_ISCSI(7)
Man Page