raidfile.conf(5) [debian man page]

RAIDFILE.CONF(5)						    Box Backup							  RAIDFILE.CONF(5)

NAME

       raidfile.conf - Userland RAID for Box Backup

SYNOPSIS

       /etc/box/raidfile.conf

DESCRIPTION

       The raidfile.conf is usually generated by raidfile-config(8) but may be manually edited if the store locations move or if more than one
       disc set is required.

       discX
	   Specifies a set of discs.

	   SetNumber
	       The set number of the RAID disc, referenced by each account.

	   BlockSize
	       The block size of the file system (usually 2048). Under BSD with FFS, set this to your file system's fragment size (most likely an
	       8th of the block size).

	   Dir0
	       The first directory in the RAID array.

	   Dir1
	       The second directory in the RAID array. If you do not wish to use the built-in RAID functionality, this field should be set to the
	       same as Dir0. You should not use the built-in RAID if you have a hardware RAID solution or if you're using another type of software
	       RAID (like md on Linux).

	   Dir2
	       The third directory in the RAID array. The same notes that apply to Dir2 also apply to Dir3.

FILES

       /etc/box/raidfile.conf

SEE ALSO

       raidfile-config(8), bbstored.conf(5)

AUTHORS

       Ben Summers

       Per Thomsen

       James O'Gorman

Box Backup 0.11 						    10/28/2011							  RAIDFILE.CONF(5)

BBSTORED-CONFIG(8)						    Box Backup							BBSTORED-CONFIG(8)

NAME

       bbstored-config - Box Backup store daemon configuration file generator

SYNOPSIS

       bbstored-config configdir servername username

DESCRIPTION

       The bbstored-config script creates configuration files and server certificates for a bbstored instance. It takes three parameters:

       configdir
	   The directory where config files will reside. A bbstored subdirectory will be created where several config files will reside. The
	   bbstored.conf file will be created in configdir.

       servername
	   The name of the server that is being configured. Usually the fully qualified domain name of the machine in question.

       username
	   The name of the user that should be running the bbstored process. Recommended name: _bbstored.

       A valid raidfile.conf(5) must be found in configdir. Several steps are taken during the run of bbstored-config:

       o   Server certificates are created. This requires interaction from the operator.

       o   The RAID volumes are checked to ensure that the configuration is consistent and will work.

       o   Instructions for next steps to take are shown. These steps may be different for different OS platforms, so pay close attention to these
	   instructions.

FILES

       /etc/box/bbstored.conf

SEE ALSO

       bbstored.conf(5), bbstored(8), bbstored-certs(8), raidfile-config(8)

AUTHORS

       Ben Summers

       Per Thomsen

       James O'Gorman

Box Backup 0.11 						    10/28/2011							BBSTORED-CONFIG(8)