LOGIND.CONF(5) logind.conf LOGIND.CONF(5)
logind.conf, logind.conf.d - Login manager configuration files
These files configure various parameters of the systemd login manager, systemd-logind.service(8).
CONFIGURATION DIRECTORIES AND PRECEDENCE
The default configuration is defined during compilation, so a configuration file is only needed when it is necessary to deviate from those
defaults. By default, the configuration file in /etc/systemd/ contains commented out entries showing the defaults as a guide to the
administrator. This file can be edited to create local overrides.
When packages need to customize the configuration, they can install configuration snippets in /usr/lib/systemd/*.conf.d/. Files in /etc/
are reserved for the local administrator, who may use this logic to override the configuration files installed by vendor packages. The main
configuration file is read before any of the configuration directories, and has the lowest precedence; entries in a file in any
configuration directory override entries in the single configuration file. Files in the *.conf.d/ configuration subdirectories are sorted
by their filename in lexicographic order, regardless of which of the subdirectories they reside in. When multiple files specify the same
option, for options which accept just a single value, the entry in the file with the lexicographically latest name takes precedence. For
options which accept a list of values, entries are collected as they occur in files sorted lexicographically. It is recommended to prefix
all filenames in those subdirectories with a two-digit number and a dash, to simplify the ordering of the files.
To disable a configuration file supplied by the vendor, the recommended way is to place a symlink to /dev/null in the configuration
directory in /etc/, with the same filename as the vendor configuration file.
All options are configured in the "[Login]" section:
Takes a positive integer. Configures how many virtual terminals (VTs) to allocate by default that, when switched to and are previously
unused, "autovt" services are automatically spawned on. These services are instantiated from the template unit autovt@.service for the
respective VT TTY name, for example, email@example.com. By default, autovt@.service is linked to getty@.service. In other words,
login prompts are started dynamically as the user switches to unused virtual terminals. Hence, this parameter controls how many login
"gettys" are available on the VTs. If a VT is already used by some other subsystem (for example, a graphical login), this kind of
activation will not be attempted. Note that the VT configured in ReserveVT= is always subject to this kind of activation, even if it is
not one of the VTs configured with the NAutoVTs= directive. Defaults to 6. When set to 0, automatic spawning of "autovt" services is
Takes a positive integer. Identifies one virtual terminal that shall unconditionally be reserved for autovt@.service activation (see
above). The VT selected with this option will be marked busy unconditionally, so that no other subsystem will allocate it. This
functionality is useful to ensure that, regardless of how many VTs are allocated by other subsystems, one login "getty" is always
available. Defaults to 6 (in other words, there will always be a "getty" available on Alt-F6.). When set to 0, VT reservation is
Takes a boolean argument. Configures whether the processes of a user should be killed when the user logs out. If true, the scope unit
corresponding to the session and all processes inside that scope will be terminated. If false, the scope is "abandoned", see
systemd.scope(5), and processes are not killed. Defaults to "yes", but see the options KillOnlyUsers= and KillExcludeUsers= below.
In addition to session processes, user process may run under the user manager unit user@.service. Depending on the linger settings,
this may allow users to run processes independent of their login sessions. See the description of enable-linger in loginctl(1).
Note that setting KillUserProcesses=yes will break tools like screen(1) and tmux(1), unless they are moved out of the session scope.
See example in systemd-run(1).
These settings take space-separated lists of usernames that override the KillUserProcesses= setting. A user name may be added to
KillExcludeUsers= to exclude the processes in the session scopes of that user from being killed even if KillUserProcesses=yes is set.
If KillExcludeUsers= is not set, the "root" user is excluded by default. KillExcludeUsers= may be set to an empty value to override
this default. If a user is not excluded, KillOnlyUsers= is checked next. If this setting is specified, only the session scopes of those
users will be killed. Otherwise, users are subject to the KillUserProcesses=yes setting.
Configures the action to take when the system is idle. Takes one of "ignore", "poweroff", "reboot", "halt", "kexec", "suspend",
"hibernate", "hybrid-sleep", "suspend-then-hibernate", and "lock". Defaults to "ignore".
Note that this requires that user sessions correctly report the idle status to the system. The system will execute the action after all
sessions report that they are idle, no idle inhibitor lock is active, and subsequently, the time configured with IdleActionSec= (see
below) has expired.
Configures the delay after which the action configured in IdleAction= (see above) is taken after the system is idle.
Specifies the maximum time a system shutdown or sleep request is delayed due to an inhibitor lock of type "delay" being active before
the inhibitor is ignored and the operation executes anyway. Defaults to 5.
HandlePowerKey=, HandleSuspendKey=, HandleHibernateKey=, HandleLidSwitch=, HandleLidSwitchDocked=
Controls how logind shall handle the system power and sleep keys and the lid switch to trigger actions such as system power-off or
suspend. Can be one of "ignore", "poweroff", "reboot", "halt", "kexec", "suspend", "hibernate", "hybrid-sleep",
"suspend-then-hibernate", and "lock". If "ignore", logind will never handle these keys. If "lock", all running sessions will be
screen-locked; otherwise, the specified action will be taken in the respective event. Only input devices with the "power-switch" udev
tag will be watched for key/lid switch events. HandlePowerKey= defaults to "poweroff". HandleSuspendKey= and HandleLidSwitch= default
to "suspend". HandleLidSwitchDocked= defaults to "ignore". HandleHibernateKey= defaults to "hibernate". If the system is inserted in
a docking station, or if more than one display is connected, the action specified by HandleLidSwitchDocked= occurs; otherwise the
HandleLidSwitch= action occurs.
A different application may disable logind's handling of system power and sleep keys and the lid switch by taking a low-level inhibitor
lock ("handle-power-key", "handle-suspend-key", "handle-hibernate-key", "handle-lid-switch"). This is most commonly used by graphical
desktop environments to take over suspend and hibernation handling, and to use their own configuration mechanisms. If a low-level
inhibitor lock is taken, logind will not take any action when that key or switch is triggered and the Handle*= settings are irrelevant.
PowerKeyIgnoreInhibited=, SuspendKeyIgnoreInhibited=, HibernateKeyIgnoreInhibited=, LidSwitchIgnoreInhibited=
Controls whether actions that systemd-logind takes when the power and sleep keys and the lid switch are triggered are subject to
high-level inhibitor locks ("shutdown", "sleep", "idle"). Low level inhibitor locks ("handle-power-key", "handle-suspend-key",
"handle-hibernate-key", "handle-lid-switch"), are always honored, irrespective of this setting.
These settings take boolean arguments. If "no", the inhibitor locks taken by applications are respected. If "yes", "shutdown", "sleep",
and "idle" inhibitor locks are ignored. PowerKeyIgnoreInhibited=, SuspendKeyIgnoreInhibited=, and HibernateKeyIgnoreInhibited= default
to "no". LidSwitchIgnoreInhibited= defaults to "yes". This means that when systemd-logind is handling events by itself (no low level
inhibitor locks are taken by another application), the lid switch does not respect suspend blockers by default, but the power and sleep
Specifies the timeout after system startup or system resume in which systemd will hold off on reacting to lid events. This is required
for the system to properly detect any hotplugged devices so systemd can ignore lid events if external monitors, or docks, are
connected. If set to 0, systemd will always react immediately, possibly before the kernel fully probed all hotplugged devices. This is
safe, as long as you do not care for systemd to account for devices that have been plugged or unplugged while the system was off.
Defaults to 30s.
Sets the size limit on the $XDG_RUNTIME_DIR runtime directory for each user who logs in. Takes a size in bytes, optionally suffixed
with the usual K, G, M, and T suffixes, to the base 1024 (IEC). Alternatively, a numerical percentage suffixed by "%" may be specified,
which sets the size limit relative to the amount of physical RAM. Defaults to 10%. Note that this size is a safety limit only. As each
runtime directory is a tmpfs file system, it will only consume as much memory as is needed.
Controls the maximum number of concurrent inhibitors to permit. Defaults to 8192 (8K).
Controls the maximum number of concurrent user sessions to manage. Defaults to 8192 (8K). Depending on how the pam_systemd.so module is
included in the PAM stack configuration, further login sessions will either be refused, or permitted but not tracked by systemd-logind.
Sets the maximum number of OS tasks each user may run concurrently. This controls the TasksMax= setting of the per-user slice unit, see
systemd.resource-control(5) for details. If assigned the special value "infinity", no tasks limit is applied. Defaults to 33%, which
equals 10813 with the kernel's defaults on the host, but might be smaller in OS containers.
Controls whether System V and POSIX IPC objects belonging to the user shall be removed when the user fully logs out. Takes a boolean
argument. If enabled, the user may not consume IPC resources after the last of the user's sessions terminated. This covers System V
semaphores, shared memory and message queues, as well as POSIX shared memory and message queues. Note that IPC objects of the root user
and other system users are excluded from the effect of this setting. Defaults to "yes".
systemd(1), systemd-logind.service(8), loginctl(1), systemd-system.conf(5)
systemd 237 LOGIND.CONF(5)