IO::Compress::RawDeflate(3pm) User Contributed Perl Documentation IO::Compress::RawDeflate(3pm)
NAME
IO::Compress::RawDeflate - Write RFC 1951 files/buffers
SYNOPSIS
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
my $status = rawdeflate $input => $output [,OPTS]
or die "rawdeflate failed: $RawDeflateError
";
my $z = new IO::Compress::RawDeflate $output [,OPTS]
or die "rawdeflate failed: $RawDeflateError
";
$z->print($string);
$z->printf($format, $string);
$z->write($string);
$z->syswrite($string [, $length, $offset]);
$z->flush();
$z->tell();
$z->eof();
$z->seek($position, $whence);
$z->binmode();
$z->fileno();
$z->opened();
$z->autoflush();
$z->input_line_number();
$z->newStream( [OPTS] );
$z->deflateParams();
$z->close() ;
$RawDeflateError ;
# IO::File mode
print $z $string;
printf $z $format, $string;
tell $z
eof $z
seek $z, $position, $whence
binmode $z
fileno $z
close $z ;
DESCRIPTION
This module provides a Perl interface that allows writing compressed data to files or buffer as defined in RFC 1951.
Note that RFC 1951 data is not a good choice of compression format to use in isolation, especially if you want to auto-detect it.
For reading RFC 1951 files/buffers, see the companion module IO::Uncompress::RawInflate.
Functional Interface
A top-level function, "rawdeflate", is provided to carry out "one-shot" compression between buffers and/or files. For finer control over
the compression process, see the "OO Interface" section.
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
rawdeflate $input => $output [,OPTS]
or die "rawdeflate failed: $RawDeflateError
";
The functional interface needs Perl5.005 or better.
rawdeflate $input => $output [, OPTS]
"rawdeflate" expects at least two parameters, $input and $output.
The $input parameter
The parameter, $input, is used to define the source of the uncompressed data.
It can take one of the following forms:
A filename
If the $input parameter is a simple scalar, it is assumed to be a filename. This file will be opened for reading and the input data
will be read from it.
A filehandle
If the $input parameter is a filehandle, the input data will be read from it. The string '-' can be used as an alias for standard
input.
A scalar reference
If $input is a scalar reference, the input data will be read from $$input.
An array reference
If $input is an array reference, each element in the array must be a filename.
The input data will be read from each file in turn.
The complete array will be walked to ensure that it only contains valid filenames before any data is compressed.
An Input FileGlob string
If $input is a string that is delimited by the characters "<" and ">" "rawdeflate" will assume that it is an input fileglob string.
The input is the list of files that match the fileglob.
See File::GlobMapper for more details.
If the $input parameter is any other type, "undef" will be returned.
The $output parameter
The parameter $output is used to control the destination of the compressed data. This parameter can take one of these forms.
A filename
If the $output parameter is a simple scalar, it is assumed to be a filename. This file will be opened for writing and the compressed
data will be written to it.
A filehandle
If the $output parameter is a filehandle, the compressed data will be written to it. The string '-' can be used as an alias for
standard output.
A scalar reference
If $output is a scalar reference, the compressed data will be stored in $$output.
An Array Reference
If $output is an array reference, the compressed data will be pushed onto the array.
An Output FileGlob
If $output is a string that is delimited by the characters "<" and ">" "rawdeflate" will assume that it is an output fileglob string.
The output is the list of files that match the fileglob.
When $output is an fileglob string, $input must also be a fileglob string. Anything else is an error.
See File::GlobMapper for more details.
If the $output parameter is any other type, "undef" will be returned.
Notes
When $input maps to multiple files/buffers and $output is a single file/buffer the input files/buffers will be stored in $output as a
concatenated series of compressed data streams.
Optional Parameters
Unless specified below, the optional parameters for "rawdeflate", "OPTS", are the same as those used with the OO interface defined in the
"Constructor Options" section below.
"AutoClose => 0|1"
This option applies to any input or output data streams to "rawdeflate" that are filehandles.
If "AutoClose" is specified, and the value is true, it will result in all input and/or output filehandles being closed once
"rawdeflate" has completed.
This parameter defaults to 0.
"BinModeIn => 0|1"
When reading from a file or filehandle, set "binmode" before reading.
Defaults to 0.
"Append => 0|1"
The behaviour of this option is dependent on the type of output data stream.
o A Buffer
If "Append" is enabled, all compressed data will be append to the end of the output buffer. Otherwise the output buffer will be
cleared before any compressed data is written to it.
o A Filename
If "Append" is enabled, the file will be opened in append mode. Otherwise the contents of the file, if any, will be truncated
before any compressed data is written to it.
o A Filehandle
If "Append" is enabled, the filehandle will be positioned to the end of the file via a call to "seek" before any compressed data
is written to it. Otherwise the file pointer will not be moved.
When "Append" is specified, and set to true, it will append all compressed data to the output data stream.
So when the output is a filehandle it will carry out a seek to the eof before writing any compressed data. If the output is a
filename, it will be opened for appending. If the output is a buffer, all compressed data will be appended to the existing buffer.
Conversely when "Append" is not specified, or it is present and is set to false, it will operate as follows.
When the output is a filename, it will truncate the contents of the file before writing any compressed data. If the output is a
filehandle its position will not be changed. If the output is a buffer, it will be wiped before any compressed data is output.
Defaults to 0.
Examples
To read the contents of the file "file1.txt" and write the compressed data to the file "file1.txt.1951".
use strict ;
use warnings ;
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
my $input = "file1.txt";
rawdeflate $input => "$input.1951"
or die "rawdeflate failed: $RawDeflateError
";
To read from an existing Perl filehandle, $input, and write the compressed data to a buffer, $buffer.
use strict ;
use warnings ;
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
use IO::File ;
my $input = new IO::File "<file1.txt"
or die "Cannot open 'file1.txt': $!
" ;
my $buffer ;
rawdeflate $input => $buffer
or die "rawdeflate failed: $RawDeflateError
";
To compress all files in the directory "/my/home" that match "*.txt" and store the compressed data in the same directory
use strict ;
use warnings ;
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
rawdeflate '</my/home/*.txt>' => '<*.1951>'
or die "rawdeflate failed: $RawDeflateError
";
and if you want to compress each file one at a time, this will do the trick
use strict ;
use warnings ;
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError) ;
for my $input ( glob "/my/home/*.txt" )
{
my $output = "$input.1951" ;
rawdeflate $input => $output
or die "Error compressing '$input': $RawDeflateError
";
}
OO Interface
Constructor
The format of the constructor for "IO::Compress::RawDeflate" is shown below
my $z = new IO::Compress::RawDeflate $output [,OPTS]
or die "IO::Compress::RawDeflate failed: $RawDeflateError
";
It returns an "IO::Compress::RawDeflate" object on success and undef on failure. The variable $RawDeflateError will contain an error
message on failure.
If you are running Perl 5.005 or better the object, $z, returned from IO::Compress::RawDeflate can be used exactly like an IO::File
filehandle. This means that all normal output file operations can be carried out with $z. For example, to write to a compressed
file/buffer you can use either of these forms
$z->print("hello world
");
print $z "hello world
";
The mandatory parameter $output is used to control the destination of the compressed data. This parameter can take one of these forms.
A filename
If the $output parameter is a simple scalar, it is assumed to be a filename. This file will be opened for writing and the compressed
data will be written to it.
A filehandle
If the $output parameter is a filehandle, the compressed data will be written to it. The string '-' can be used as an alias for
standard output.
A scalar reference
If $output is a scalar reference, the compressed data will be stored in $$output.
If the $output parameter is any other type, "IO::Compress::RawDeflate"::new will return undef.
Constructor Options
"OPTS" is any combination of the following options:
"AutoClose => 0|1"
This option is only valid when the $output parameter is a filehandle. If specified, and the value is true, it will result in the
$output being closed once either the "close" method is called or the "IO::Compress::RawDeflate" object is destroyed.
This parameter defaults to 0.
"Append => 0|1"
Opens $output in append mode.
The behaviour of this option is dependent on the type of $output.
o A Buffer
If $output is a buffer and "Append" is enabled, all compressed data will be append to the end of $output. Otherwise $output will
be cleared before any data is written to it.
o A Filename
If $output is a filename and "Append" is enabled, the file will be opened in append mode. Otherwise the contents of the file, if
any, will be truncated before any compressed data is written to it.
o A Filehandle
If $output is a filehandle, the file pointer will be positioned to the end of the file via a call to "seek" before any compressed
data is written to it. Otherwise the file pointer will not be moved.
This parameter defaults to 0.
"Merge => 0|1"
This option is used to compress input data and append it to an existing compressed data stream in $output. The end result is a single
compressed data stream stored in $output.
It is a fatal error to attempt to use this option when $output is not an RFC 1951 data stream.
There are a number of other limitations with the "Merge" option:
1. This module needs to have been built with zlib 1.2.1 or better to work. A fatal error will be thrown if "Merge" is used with an
older version of zlib.
2. If $output is a file or a filehandle, it must be seekable.
This parameter defaults to 0.
-Level
Defines the compression level used by zlib. The value should either be a number between 0 and 9 (0 means no compression and 9 is
maximum compression), or one of the symbolic constants defined below.
Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION
The default is Z_DEFAULT_COMPRESSION.
Note, these constants are not imported by "IO::Compress::RawDeflate" by default.
use IO::Compress::RawDeflate qw(:strategy);
use IO::Compress::RawDeflate qw(:constants);
use IO::Compress::RawDeflate qw(:all);
-Strategy
Defines the strategy used to tune the compression. Use one of the symbolic constants defined below.
Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY
The default is Z_DEFAULT_STRATEGY.
"Strict => 0|1"
This is a placeholder option.
Examples
TODO
Methods
print
Usage is
$z->print($data)
print $z $data
Compresses and outputs the contents of the $data parameter. This has the same behaviour as the "print" built-in.
Returns true if successful.
printf
Usage is
$z->printf($format, $data)
printf $z $format, $data
Compresses and outputs the contents of the $data parameter.
Returns true if successful.
syswrite
Usage is
$z->syswrite $data
$z->syswrite $data, $length
$z->syswrite $data, $length, $offset
Compresses and outputs the contents of the $data parameter.
Returns the number of uncompressed bytes written, or "undef" if unsuccessful.
write
Usage is
$z->write $data
$z->write $data, $length
$z->write $data, $length, $offset
Compresses and outputs the contents of the $data parameter.
Returns the number of uncompressed bytes written, or "undef" if unsuccessful.
flush
Usage is
$z->flush;
$z->flush($flush_type);
Flushes any pending compressed data to the output file/buffer.
This method takes an optional parameter, $flush_type, that controls how the flushing will be carried out. By default the $flush_type used
is "Z_FINISH". Other valid values for $flush_type are "Z_NO_FLUSH", "Z_SYNC_FLUSH", "Z_FULL_FLUSH" and "Z_BLOCK". It is strongly
recommended that you only set the "flush_type" parameter if you fully understand the implications of what it does - overuse of "flush" can
seriously degrade the level of compression achieved. See the "zlib" documentation for details.
Returns true on success.
tell
Usage is
$z->tell()
tell $z
Returns the uncompressed file offset.
eof
Usage is
$z->eof();
eof($z);
Returns true if the "close" method has been called.
seek
$z->seek($position, $whence);
seek($z, $position, $whence);
Provides a sub-set of the "seek" functionality, with the restriction that it is only legal to seek forward in the output file/buffer. It
is a fatal error to attempt to seek backward.
Empty parts of the file/buffer will have NULL(0x00) bytes written to them.
The $whence parameter takes one the usual values, namely SEEK_SET, SEEK_CUR or SEEK_END.
Returns 1 on success, 0 on failure.
binmode
Usage is
$z->binmode
binmode $z ;
This is a noop provided for completeness.
opened
$z->opened()
Returns true if the object currently refers to a opened file/buffer.
autoflush
my $prev = $z->autoflush()
my $prev = $z->autoflush(EXPR)
If the $z object is associated with a file or a filehandle, this method returns the current autoflush setting for the underlying
filehandle. If "EXPR" is present, and is non-zero, it will enable flushing after every write/print operation.
If $z is associated with a buffer, this method has no effect and always returns "undef".
Note that the special variable $| cannot be used to set or retrieve the autoflush setting.
input_line_number
$z->input_line_number()
$z->input_line_number(EXPR)
This method always returns "undef" when compressing.
fileno
$z->fileno()
fileno($z)
If the $z object is associated with a file or a filehandle, "fileno" will return the underlying file descriptor. Once the "close" method is
called "fileno" will return "undef".
If the $z object is associated with a buffer, this method will return "undef".
close
$z->close() ;
close $z ;
Flushes any pending compressed data and then closes the output file/buffer.
For most versions of Perl this method will be automatically invoked if the IO::Compress::RawDeflate object is destroyed (either explicitly
or by the variable with the reference to the object going out of scope). The exceptions are Perl versions 5.005 through 5.00504 and 5.8.0.
In these cases, the "close" method will be called automatically, but not until global destruction of all live objects when the program is
terminating.
Therefore, if you want your scripts to be able to run on all versions of Perl, you should call "close" explicitly and not rely on automatic
closing.
Returns true on success, otherwise 0.
If the "AutoClose" option has been enabled when the IO::Compress::RawDeflate object was created, and the object is associated with a file,
the underlying file will also be closed.
newStream([OPTS])
Usage is
$z->newStream( [OPTS] )
Closes the current compressed data stream and starts a new one.
OPTS consists of any of the the options that are available when creating the $z object.
See the "Constructor Options" section for more details.
deflateParams
Usage is
$z->deflateParams
TODO
Importing
A number of symbolic constants are required by some methods in "IO::Compress::RawDeflate". None are imported by default.
:all Imports "rawdeflate", $RawDeflateError and all symbolic constants that can be used by "IO::Compress::RawDeflate". Same as doing this
use IO::Compress::RawDeflate qw(rawdeflate $RawDeflateError :constants) ;
:constants
Import all symbolic constants. Same as doing this
use IO::Compress::RawDeflate qw(:flush :level :strategy) ;
:flush
These symbolic constants are used by the "flush" method.
Z_NO_FLUSH
Z_PARTIAL_FLUSH
Z_SYNC_FLUSH
Z_FULL_FLUSH
Z_FINISH
Z_BLOCK
:level
These symbolic constants are used by the "Level" option in the constructor.
Z_NO_COMPRESSION
Z_BEST_SPEED
Z_BEST_COMPRESSION
Z_DEFAULT_COMPRESSION
:strategy
These symbolic constants are used by the "Strategy" option in the constructor.
Z_FILTERED
Z_HUFFMAN_ONLY
Z_RLE
Z_FIXED
Z_DEFAULT_STRATEGY
EXAMPLES
Apache::GZip Revisited
See IO::Compress::FAQ
Working with Net::FTP
See IO::Compress::FAQ
SEE ALSO
Compress::Zlib, IO::Compress::Gzip, IO::Uncompress::Gunzip, IO::Compress::Deflate, IO::Uncompress::Inflate, IO::Uncompress::RawInflate,
IO::Compress::Bzip2, IO::Uncompress::Bunzip2, IO::Compress::Lzma, IO::Uncompress::UnLzma, IO::Compress::Xz, IO::Uncompress::UnXz,
IO::Compress::Lzop, IO::Uncompress::UnLzop, IO::Compress::Lzf, IO::Uncompress::UnLzf, IO::Uncompress::AnyInflate,
IO::Uncompress::AnyUncompress
IO::Compress::FAQ
File::GlobMapper, Archive::Zip, Archive::Tar, IO::Zlib
For RFC 1950, 1951 and 1952 see http://www.faqs.org/rfcs/rfc1950.html, http://www.faqs.org/rfcs/rfc1951.html and
http://www.faqs.org/rfcs/rfc1952.html
The zlib compression library was written by Jean-loup Gailly gzip@prep.ai.mit.edu and Mark Adler madler@alumni.caltech.edu.
The primary site for the zlib compression library is http://www.zlib.org.
The primary site for gzip is http://www.gzip.org.
AUTHOR
This module was written by Paul Marquess, pmqs@cpan.org.
MODIFICATION HISTORY
See the Changes file.
COPYRIGHT AND LICENSE
Copyright (c) 2005-2012 Paul Marquess. All rights reserved.
This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself.
perl v5.14.2 2012-04-29 IO::Compress::RawDeflate(3pm)