Cflow(3pm) User Contributed Perl Documentation Cflow(3pm)
NAME
Cflow::find - find "interesting" flows in raw IP flow files
SYNOPSIS
use Cflow;
Cflow::verbose(1);
Cflow::find(&wanted, <*.flows*>);
sub wanted { ... }
or:
Cflow::find(&wanted, &perfile, <*.flows*>);
sub perfile {
my $fname = shift;
...
}
BACKROUND
This module implements an API for processing IP flow accounting information which as been collected from routers and written into flow
files by one of the various flow collectors listed below.
It was originally conceived and written for use by FlowScan:
http://net.doit.wisc.edu/~plonka/FlowScan/
Flow File Sources
This package is of little use on its own. It requires input in the form of time-stamped raw flow files produced by other software
packages. These "flow sources" either snoop a local ethernet (via libpcap) or collect flow information from IP routers that are configured
to export said information. The following flow sources are supported:
argus by Carter Bullard:
http://www.qosient.com/argus/
flow-tools by Mark Fullmer (with NetFlow v1, v5, v6, or v7):
http://www.splintered.net/sw/flow-tools/
CAIDA's cflowd (with NetFlow v5):
http://www.caida.org/tools/measurement/cflowd/
http://net.doit.wisc.edu/~plonka/cflowd/
lfapd by Steve Premeau (with LFAPv4):
http://www.nmops.org/
DESCRIPTION
Cflow::find() will iterate across all the flows in the specified files. It will call your wanted() function once per flow record. If the
file name argument passed to find() is specified as "-", flows will be read from standard input.
The wanted() function does whatever you write it to do. For instance, it could simply print interesting flows or it might maintain byte,
packet, and flow counters which could be written to a database after the find subroutine completes.
Within your wanted() function, tests on the "current" flow can be performed using the following variables:
$Cflow::unix_secs
secs since epoch (deprecated)
$Cflow::exporter
Exporter IP Address as a host-ordered "long"
$Cflow::exporterip
Exporter IP Address as dotted-decimal string
$Cflow::localtime
$Cflow::unix_secs interpreted as localtime with this strftime(3) format:
%Y/%m/%d %H:%M:%S
$Cflow::srcaddr
Source IP Address as a host-ordered "long"
$Cflow::srcip
Source IP Address as a dotted-decimal string
$Cflow::dstaddr
Destination IP Address as a host-ordered "long"
$Cflow::dstip
Destination IP Address as a dotted-decimal string
$Cflow::input_if
Input interface index
$Cflow::output_if
Output interface index
$Cflow::srcport
TCP/UDP src port number or equivalent
$Cflow::dstport
TCP/UDP dst port number or equivalent
$Cflow::ICMPType
high byte of $Cflow::dstport
Undefined if the current flow is not an ICMP flow.
$Cflow::ICMPCode
low byte of $Cflow::dstport
Undefined if the current flow is not an ICMP flow.
$Cflow::ICMPTypeCode
symbolic representation of $Cflow::dstport
The value is a the type-specific ICMP code, if any, followed by the ICMP type. E.g.
ECHO
HOST_UNREACH
Undefined if the current flow is not an ICMP flow.
$Cflow::pkts
Packets sent in Duration
$Cflow::bytes
Octets sent in Duration
$Cflow::nexthop
Next hop router's IP Address as a host-ordered "long"
$Cflow::nexthopip
Next hop router's IP Address as a dotted-decimal string
$Cflow::startime
secs since epoch at start of flow
$Cflow::start_msecs
fractional portion of startime (in milliseconds)
This will be zero unless the source is flow-tools or argus.
$Cflow::endtime
secs since epoch at last packet of flow
$Cflow::end_msecs
fractional portion of endtime (in milliseconds)
This will be zero unless the source is flow-tools or argus.
$Cflow::protocol
IP protocol number (as is specified in /etc/protocols, i.e. 1=ICMP, 6=TCP, 17=UDP, etc.)
$Cflow::tos
IP Type-of-Service
$Cflow::tcp_flags
bitwise OR of all TCP flags that were set within packets in the flow; 0x10 for non-TCP flows
$Cflow::TCPFlags
symbolic representation of $Cflow::tcp_flags The value will be a bitwise-or expression. E.g.
PUSH|SYN|FIN|ACK
Undefined if the current flow is not a TCP flow.
$Cflow::raw
the entire "packed" flow record as read from the input file
This is useful when the "wanted" subroutine wants to write the flow to another FILEHANDLE. E.g.:
syswrite(FILEHANDLE, $Cflow::raw, length $Cflow::raw)
$Cflow::reraw
the entire "re-packed" flow record formatted like $Cflow::raw.
This is useful when the "wanted" subroutine wants to write a modified flow to another FILEHANDLE. E.g.:
$srcaddr = my_encode($srcaddr);
$dstaddr = my_encode($dstaddr);
syswrite(FILEHANDLE, $Cflow::reraw, length $Cflow::raw)
These flow variables are packed into $Cflow::reraw:
$Cflow::index, $Cflow::exporter,
$Cflow::srcaddr, $Cflow::dstaddr,
$Cflow::input_if, $Cflow::output_if,
$Cflow::srcport, $Cflow::dstport,
$Cflow::pkts, $Cflow::bytes,
$Cflow::nexthop,
$Cflow::startime, $Cflow::endtime,
$Cflow::protocol, $Cflow::tos,
$Cflow::src_as, $Cflow::dst_as,
$Cflow::src_mask, $Cflow::dst_mask,
$Cflow::tcp_flags,
$Cflow::engine_type, $Cflow::engine_id
$Cflow::Bps
the minimum bytes per second for the current flow
$Cflow::pps
the minimum packets per second for the current flow
The following variables are undefined if using NetFlow v1 (which does not contain the requisite information):
$Cflow::src_as
originating or peer AS of source address
$Cflow::dst_as
originating or peer AS of destination address
The following variables are undefined if using NetFlow v1 or LFAPv4 (which do not contain the requisite information):
$Cflow::src_mask
source address prefix mask bits
$Cflow::dst_mask
destination address prefix mask bits
$Cflow::engine_type
type of flow switching engine
$Cflow::engine_id
ID of the flow switching engine
Optionally, a reference to a perfile() function can be passed to Cflow::find as the argument following the reference to the wanted()
function. This perfile() function will be called once for each flow file. The argument to the perfile() function will be name of the flow
file which is about to be processed. The purpose of the perfile() function is to allow you to periodically report the progress of
Cflow::find() and to provide an opportunity to periodically reclaim storage used by data objects that may have been allocated or maintained
by the wanted() function. For instance, when counting the number of active hosts IP addresses in each time-stamped flow file, perfile()
can reset the counter to zero and clear the search tree or hash used to remember those IP addresses.
Since Cflow is an Exporter, you can request that all those scalar flow variables be exported (so that you need not use the "Cflow::"
prefix):
use Cflow qw(:flowvars);
Also, you can request that the symbolic names for the TCP flags, ICMP types, and/or ICMP codes be exported:
use Cflow qw(:tcpflags :icmptypes :icmpcodes);
The tcpflags are:
$TH_FIN $TH_SYN $TH_RST $TH_PUSH $TH_ACK $TH_URG
The icmptypes are:
$ICMP_ECHOREPLY $ICMP_DEST_UNREACH $ICMP_SOURCE_QUENCH
$ICMP_REDIRECT $ICMP_ECHO $ICMP_TIME_EXCEEDED
$ICMP_PARAMETERPROB $ICMP_TIMESTAMP $ICMP_TIMESTAMPREPLY
$ICMP_INFO_REQUEST $ICMP_INFO_REPLY $ICMP_ADDRESS
$ICMP_ADDRESSREPLY
The icmpcodes are:
$ICMP_NET_UNREACH $ICMP_HOST_UNREACH $ICMP_PROT_UNREACH
$ICMP_PORT_UNREACH $ICMP_FRAG_NEEDED $ICMP_SR_FAILED
$ICMP_NET_UNKNOWN $ICMP_HOST_UNKNOWN $ICMP_HOST_ISOLATED
$ICMP_NET_ANO $ICMP_HOST_ANO $ICMP_NET_UNR_TOS
$ICMP_HOST_UNR_TOS $ICMP_PKT_FILTERED $ICMP_PREC_VIOLATION
$ICMP_PREC_CUTOFF $ICMP_UNREACH $ICMP_REDIR_NET
$ICMP_REDIR_HOST $ICMP_REDIR_NETTOS $ICMP_REDIR_HOSTTOS
$ICMP_EXC_TTL $ICMP_EXC_FRAGTIME
Please note that the names above are not necessarily exactly the same as the names of the flags, types, and codes as set in the values of
the aforemented $Cflow::TCPFlags and $Cflow::ICMPTypeCode flow variables.
Lastly, as is usually the case for modules, the subroutine names can be imported, and a minimum version of Cflow can be specified:
use Cflow qw(:flowvars find verbose 1.031);
Cflow::find() returns a "hit-ratio". This hit-ratio is a string formatted similarly to that of the value of a perl hash when taken in a
scalar context. This hit-ratio indicates ((# of "wanted" flows) / (# of scanned flows)). A flow is considered to have been "wanted" if
your wanted() function returns non-zero.
Cflow::verbose() takes a single scalar boolean argument which indicates whether or not you wish warning messages to be generated to STDERR
when "problems" occur. Verbose mode is set by default.
EXAMPLES
Here's a complete example with a sample wanted function. It will print all UDP flows that involve either a source or destination port of
31337 and port on the other end that is unreserved (greater than 1024):
use Cflow qw(:flowvars find);
my $udp = getprotobyname('udp');
verbose(0);
find(&wanted, @ARGV? @ARGV : <*.flows*>);
sub wanted {
return if ($srcport < 1024 || $dstport < 1024);
return unless (($srcport == 31337 || $dstport == 31337) &&
$udp == $protocol);
printf("%s %15.15s.%-5hu %15.15s.%-5hu %2hu %10u %10u
",
$localtime,
$srcip,
$srcport,
$dstip,
$dstport,
$protocol,
$pkts,
$bytes)
}
Here's an example which demonstrates a technique which can be used to pass arbitrary arguments to your wanted function by passing a
reference to an anonymous subroutine as the wanted() function argument to Cflow::find():
sub wanted {
my @params = @_;
# ...
}
Cflow::find(sub { wanted(@params) }, @files);
ARGUS NOTES
Argus uses a bidirectional flow model. This means that some argus flows represent packets not only in the forward direction (from "source"
to "destination"), but also in the reverse direction (from the so-called "destination" to the "source"). However, this module uses a
unidirection flow model, and therfore splits some argus flows into two unidirectional flows for the purpose of reporting.
Currently, using this module's API there is no way to determine if two subsequently reported unidirectional flows were really a single
argus flow. This may be addressed in a future release of this package.
Furthermore, for argus flows which represent bidirectional ICMP traffic, this module presumes that all the reverse packets were ECHOREPLYs
(sic). This is sometimes incorrect as described here:
http://www.theorygroup.com/Archive/Argus/2002/msg00016.html
and will be fixed in a future release of this package.
Timestamps ($startime and $endtime) are sometimes reported incorrectly for bidirectional argus flows that represent only one packet in each
direction. This will be fixed in a future release.
Argus flows sometimes contain information which does not map directly to the flow variables presented by this module. For the time being,
this information is simply not accessible through this module's API. This may be addressed in a future release.
Lastly, argus flows produced from observed traffic on a local ethernet do not contain enough information to meaningfully set the values of
all this module's flow variables. For instance, the next-hop and input/output ifIndex numbers are missing. For the time being, all argus
flows accessed throught this module's API will have both the $input_if and $output_if as 42. Althought 42 is the answer to life, the
universe, and everthing, in this context, it is just an arbitrary number. It is important that $output_if is non-zero, however, since
existing FlowScan reports interpret an $output_if value of zero to mean that the traffic represented by that flow was not forwarded (i.e.
dropped). For similar reasons, the $nexthopip for all argus flows is reported as "127.0.0.1".
BUGS
Currently, only NetFlow version 5 is supported when reading cflowd-format raw flow files.
When built with support for flow-tools and attempting to read a cflowd format raw flow file from standard input, you'll get the error:
open "-": No such file or directory
For the time being, the workaround is to write the content to a file and read it from directly from there rather than from standard input.
(This happens because we can't close and re-open file descriptor zero after determining that the content was not in flow-tools format.)
When built with support for flow-tools and using verbose mode, Cflow::find will generate warnings if you process a cflowd format raw flow
file. This happens because it will first attempt to open the file as a flow-tools format raw flow file (which will produce a warning
message), and then revert to handling it as cflowd format raw flow file.
Likewise, when built with support for argus and attempting to read a cflowd format raw flow file from standard input, you'll get this
warning message:
not Argus-2.0 data stream.
This is because argus (as of argus-2.0.4) doesn't seem to have a mode in which such warning messages are supressed.
The $Cflow::raw flow variable contains the flow record in cflowd format, even if it was read from a raw flow file produced by flow-tools or
argus. Because cflowd discards the fractional portion of the flow start and end time, only the whole seconds portion of these times will
be retained. (That is, the raw record in $Cflow::raw does not contain the $start_msecs and $end_msecs, so using $Cflow::raw to convert to
cflowd format is a lossy operation.)
When used with cflowd, Cflow::find() will generate warnings if the flow data file is "invalid" as far as its concerned. To avoid this, you
must be using Cisco version 5 flow-export and configure cflowd so that it saves all flow-export data. This is the default behavior when
cflowd produces time-stamped raw flow files after being patched as described here:
http://net.doit.wisc.edu/~plonka/cflowd/
NOTES
The interface presented by this package is a blatant ripoff of File::Find.
AUTHOR
Dave Plonka <plonka@doit.wisc.edu>
Copyright (C) 1998-2002 Dave Plonka. This program is free software; you can redistribute it and/or modify it under the terms of the GNU
General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later
version.
VERSION
The version number is the module file RCS revision number ($Revision: 1.51 $) with the minor number printed right justified with leading
zeroes to 3 decimal places. For instance, RCS revision 1.1 would yield a package version number of 1.001.
This is so that revision 1.10 (which is version 1.010), for example, will test greater than revision 1.2 (which is version 1.002) when you
want to require a minimum version of this module.
SEE ALSO
perl(1), Socket, Net::Netmask, Net::Patricia.
perl v5.14.2 2012-06-09 Cflow(3pm)