mkdevmaps(1m) [debian man page]

mkdevmaps(1M)						  System Administration Commands					     mkdevmaps(1M)

NAME

       mkdevmaps - make device_maps entries

SYNOPSIS

       /usr/sbin/mkdevmaps

DESCRIPTION

       The  mkdevmaps  command	writes	to standard out a set of device_maps(4) entries describing the system's frame buffer, audio, and removable
       media devices.

       The mkdevmaps command is used by the init.d(4) scripts to create or update the /etc/security/device_maps file.

       Entries are generated based on the device special files found in /dev. For the different  categories  of  devices,  the	mkdevmaps  command
       checks for the following files under /dev:

       audio	       /dev/audio, /dev/audioctl, /dev/sound/...
       tape	       /dev/rst*, /dev/nrst*, /dev/rmt/...
       floppy	       /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
       removable disk  /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
       frame buffer    /dev/fb

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Obsolete			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       allocate(1), bsmconv(1M), attributes(5)

NOTES

       mkdevmaps might not be supported in a future release of the Solaris operating system.

SunOS 5.10							    8 Oct 2003							     mkdevmaps(1M)

mkdevalloc(1M)						  System Administration Commands					    mkdevalloc(1M)

NAME

       mkdevalloc - Make device_allocate entries

SYNOPSIS

       /usr/sbin/mkdevalloc

DESCRIPTION

       The mkdevalloc command writes to standard out a set of device_allocate(4) entries describing the system's frame buffer, audio and removable
       media devices.

       The mkdevalloc command is used by the init.d(4) scripts to create or update the /etc/security/device_allocate file.

       Entries are generated based on the device special files found in /dev. For the different categories  of	devices,  the  mkdevalloc  command
       checks for the following files under /dev:

	 audio		 /dev/audio, /dev/audioctl, /dev/sound/...
	 tape		 /dev/rst*, /dev/nrst*, /dev/rmt/...
	 floppy 	 /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
	 removable disk  /dev/sr*, /dev/nsr*, /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
	 frame buffer	 /dev/fb

       All  entries  set  the  device-minimum  and device-maximum fields to the hex representations of ADMIN_LOW and ADMIN_HIGH, respectively. The
       device-authorization field is set to solaris.device.allocate, except for the framebuffer entry, where it is  set  to  *.  The  device-name,
       device-type and device-clean fields are set to the following values:

			 device-name	  device-type	device-clean

	 audio		 audio		  audio 	audio_clean_wrapper
	 tape		 mag_tape_0,1,... st		st_clean
	 floppy 	 floppy_0,1,...   fd		disk_clean
	 removable disk  cdrom_0,1,...	  sr		disk_clean
	 frame buffer	 framebuffer	  fb		/bin/true

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Obsolete			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       allocate(1), bsmconv(1M), attributes(5)

NOTES

       mkdevalloc might not be supported in a future release of the Solaris operating system.

SunOS 5.11							    8 Oct 2003							    mkdevalloc(1M)