SMAP(1) Slurm components SMAP(1)
NAME
smap - graphically view information about SLURM jobs, partitions, and set configurations parameters.
SYNOPSIS
smap [OPTIONS...]
DESCRIPTION
smap is used to graphically view job, partition and node information for a system running SLURM. Note that information about nodes and
partitions to which a user lacks access will always be displayed to avoid obvious gaps in the output. This is equivalent to the --all
option of the sinfo and squeue commands.
OPTIONS
-c, --commandline
Print output to the commandline, no curses.
-D <option>, --display=<option>
sets the display mode for smap. Showing revelant information about specific views and displaying a corresponding node chart. While
in any display a user can switch by typing a different view letter. This is true in all modes except for 'configure mode' user can
type 'quit' to exit just configure mode. Typing 'exit' will end the configuration mode and exit smap. Note that unallocated nodes
are indicated by a '.' and nodes in the DOWN, DRAINED or FAIL state by a '#'.
b Displays information about BlueGene partitions on the system
c Displays current BlueGene node states and allows users to configure the system.
j Displays information about jobs running on system.
r Display information about advanced reservations. While all current and future reservations will be listed, only cur-
rently active reservations will appear on the node map.
s Displays information about slurm partitions on the system
-h, --noheader
Do not print a header on the output.
-H, --show_hidden
Display hidden partitions and their jobs.
--help,
Print a message describing all smap options.
-i <seconds> , --iterate=<seconds>
Print the state on a periodic basis. Sleep for the indicated number of seconds between reports. User can exit at anytime by typing
'q' or hitting the return key. If user is in configure mode type 'exit' to exit program, 'quit' to exit configure mode.
-I, --ionodes
Only show objects with these ionodes this support is only for bluegene systems. This should be used inconjuction with the '-n'
option. Only specify the ionode number range here. Specify the node name with the '-n' option.
-M, --clusters=<string>
Clusters to issue commands to.
-n, --nodes
Only show objects with these nodes. If querying to the ionode level use the option '-I' in conjunction with this option.
-Q, --quiet
Avoid printing error messages.
-R <RACK_MIDPLANE_ID/XYZ>, --resolve=<RACK_MIDPLANE_ID/XYZ>
Returns the XYZ coords for a Rack/Midplane id or vice-versa.
To get the XYZ coord for a Rack/Midplane id input -R R101 where 10 is the rack and 1 is the midplane.
To get the Rack/Midplane id from a XYZ coord input -R 101 where X=1 Y=1 Z=1 with no leading 'R'.
--usage
Print a brief message listing the smap options.
-V , --version
Print version information and exit.
INTERACTIVE OPTIONS
When using smap in curses mode you can scroll through the different windows using the arrow keys. The up and down arrow keys scroll the
window containing the grid, and the left and right arrow keys scroll the window containing the text information.
To change screens when an iterate is set you can use any of the options available to the -D option listed above.
You can also hide or make visible hidden partitions by pressing h at any moment when an iterate is set.
OUTPUT FIELD DESCRIPTIONS
ACCESS_CONTROL
Identifies the users or bank accounts which can use this advanced reservation. A prefix of "A:" indicates that the following
account names may use this reservation. A prefix of "U:" indicates that the following user names may use this reservation.
AVAIL Partition state: up or down.
BG_BLOCK
BlueGene Block Name.
CONN Connection Type: TORUS or MESH or SMALL (for small blocks).
END_TIME
The time when an advanced reservation ended.
ID Key to identify the nodes associated with this entity in the node chart.
MODE Mode Type: COPROCESS or VIRTUAL.
NAME Name of the job or advanced reservation.
NODELIST or BP_LIST
Names of nodes or base partitions associated with this configuration, partition or reservation.
NODES Count of nodes or base partitions with this particular configuration.
PARTITION
Name of a partition. Note that the suffix "*" identifies the default partition.
ST State of a job in compact form. Possible states include: PD (pending), R (running), S (suspended), CD (completed), CF (configur-
ing), CG (completing), F (failed), TO (timeout), and NF (node failure). See JOB STATE CODES section below for more information.
START_TIME
The time when an advanced reservation started.
STATE State of the nodes. Possible states include: allocated, completing, down, drained, draining, fail, failing, idle, and unknown plus
their abbreviated forms: alloc, comp, donw, drain, drng, fail, failg, idle, and unk respectively. Note that the suffix "*" identi-
fies nodes that are presently not responding. See NODE STATE CODES section below for more information.
TIMELIMIT
Maximum time limit for any user job in days-hours:minutes:seconds. infinite is used to identify jobs or partitions without a job
time limit.
TOPOGRAPHY INFORMATION
The node chart is designed to indicate relative locations of the nodes. On most Linux clusters this will represent a one-dimensional array
of nodes. Larger clusters will utilize multiple as needed with right side of one line being logically followed by the left side of the next
line.
On BlueGene systems, the node chart will indicate the three
dimensional topography of the system.
The X dimension will increase from left to right on a given line.
The Y dimension will increase in planes from bottom to top.
The Z dimension will increase within a plane from the back
line to the front line of a plane.
Note the example below:
a a a a b b d d
a a a a b b d d
a a a a b b c c
a a a a b b c c
a a a a b b d d
a a a a b b d d
a a a a b b c c
a a a a b b c c
a a a a . . d d
a a a a . . d d
a a a a . . e e Y
a a a a . . e e |
|
a a a a . . d d 0----X
a a a a . . d d /
a a a a . . . . /
a a a a . . . # Z
ID JOBID PARTITION BG_BLOCK USER NAME ST TIME NODES BP_LIST
a 12345 batch RMP0 joseph tst1 R 43:12 32k bgl[000x333]
b 12346 debug RMP1 chris sim3 R 12:34 8k bgl[420x533]
c 12350 debug RMP2 danny job3 R 0:12 4k bgl[622x733]
d 12356 debug RMP3 dan colu R 18:05 8k bgl[600x731]
e 12378 debug RMP4 joseph asx4 R 0:34 2k bgl[612x713]
CONFIGURATION INSTRUCTIONS
For Admin use. From this screen one can create a configuration file that is used to partition and wire the system into usable blocks.
OUTPUT
BG_BLOCK
BlueGene Block Name.
CONN Connection Type: TORUS or MESH or SMALL (for small blocks).
ID Key to identify the nodes associated with this entity in the node chart.
MODE Mode Type: COPROCESS or VIRTUAL.
INPUT COMMANDS
resolve <RACK_MIDPLANE_ID/XYZ>
Returns the XYZ coords for a Rack/Midplane id or vice-versa.
To get the XYZ coord for a Rack/Midplane id input -R R101 where 10 is the rack and 1 is the midplane.
To get the Rack/Midplane id from a XYZ coord input -R 101 where X=1 Y=1 Z=1 with no leading 'R'.
load <bluegene.conf file>
Load an already exsistant bluegene.conf file. This will varify and mapout a bluegene.conf file. After loaded the configura-
tion may be edited and saved as a new file.
create <size> <options>
Submit request for partition creation. The size may be specified either as a count of base partitions or specific dimensions
in the X, Y and Z directions separated by "x", for example "2x3x4". A variety of options may be specified. Valid options are
listed below. Note that the option and their values are case insensitive (e.g. "MESH" and "mesh" are equivalent).
Start = XxYxZ
Identify where to start the partition. This is primarily for testing purposes. For convenience one can only put the X coord
or XxY will also work. The default value is 0x0x0.
Connection = MESH | TORUS | SMALL
Identify how the nodes should be connected in network. The default value is TORUS.
Small Equivalent to "Connection=Small". If a small connection is specified the base partition chosen will create smaller
partitions based on options 32CNBlocks and 128CNBlocks respectively for a Bluegene L system. 16CNBlocks, 64CNBlocks,
and 256CNBlocks are also available for Bluegene P systems. Keep in mind you must have enough ionodes to make all
these configurations possible.
These number will be altered to take up the entire base partition. Size does not need to be specified with a small
request, we will always default to 1 base partition for allocation.
Mesh Equivalent to "Connection=Mesh".
Torus Equivalent to "Connection=Torus".
Rotation = TRUE | FALSE
Specifies that the geometry specified in the size parameter may be rotated in space (e.g. the Y and Z dimensions may be
switched). The default value is FALSE.
Rotate Equivalent to "Rotation=true".
Elongation = TRUE | FALSE
If TRUE, permit the geometry specified in the size parameter to be altered as needed to fit available resources. For exam-
ple, an allocation of "4x2x1" might be used to satisfy a size specification of "2x2x2". The default value is FALSE.
Elongate
Equivalent to "Elongation=true".
copy <id> <count>
Submit request for partition to be copied. You may copy a specific partition by specifying its id, by default the last con-
figured partition is copied. You may also specify a number of copies to be made. By default, one copy is made.
delete <id>
Delete the specified block.
down <node_range>
Down a specific node or range of nodes. i.e. 000, 000-111 [000x111]
up <node_range>
Bring a specific node or range of nodes up. i.e. 000, 000-111 [000x111]
alldown
Set all nodes to down state.
allup Set all nodes to up state.
save <file_name>
Save the current configuration to a file. If no file_name is specified, the configuration is written to a file named "blue-
gene.conf" in the current working directory.
clear Clear all partitions created.
NODE STATE CODES
Node state codes are shortened as required for the field size. If the node state code is followed by "*", this indicates the node is
presently not responding and will not be allocated any new work. If the node remains non-responsive, it will be placed in the DOWN state
(except in the case of COMPLETING, DRAINED, DRAINING, FAIL, FAILING nodes).
If the node state code is followed by "~", this indicates the node is presently in a power saving mode (typically running at reduced fre-
quency). If the node state code is followed by "#", this indicates the node is presently being powered up or configured.
ALLOCATED The node has been allocated to one or more jobs.
ALLOCATED+ The node is allocated to one or more active jobs plus one or more jobs are in the process of COMPLETING.
COMPLETING All jobs associated with this node are in the process of COMPLETING. This node state will be removed when all of the job's
processes have terminated and the SLURM epilog program (if any) has terminated. See the Epilog parameter description in the
slurm.conf man page for more information.
DOWN The node is unavailable for use. SLURM can automatically place nodes in this state if some failure occurs. System administra-
tors may also explicitly place nodes in this state. If a node resumes normal operation, SLURM can automatically return it to
service. See the ReturnToService and SlurmdTimeout parameter descriptions in the slurm.conf(5) man page for more information.
DRAINED The node is unavailable for use per system administrator request. See the update node command in the scontrol(1) man page or
the slurm.conf(5) man page for more information.
DRAINING The node is currently executing a job, but will not be allocated to additional jobs. The node state will be changed to state
DRAINED when the last job on it completes. Nodes enter this state per system administrator request. See the update node command
in the scontrol(1) man page or the slurm.conf(5) man page for more information.
FAIL The node is expected to fail soon and is unavailable for use per system administrator request. See the update node command in
the scontrol(1) man page or the slurm.conf(5) man page for more information.
FAILING The node is currently executing a job, but is expected to fail soon and is unavailable for use per system administrator
request. See the update node command in the scontrol(1) man page or the slurm.conf(5) man page for more information.
IDLE The node is not allocated to any jobs and is available for use.
MAINT The node is currently in a reservation with a flag value of "maintainence".
UNKNOWN The SLURM controller has just started and the node's state has not yet been determined.
JOB STATE CODES
Jobs typically pass through several states in the course of their execution. The typical states are PENDING, RUNNING, SUSPENDED, COMPLET-
ING, and COMPLETED. An explanation of each state follows.
CA CANCELLED Job was explicitly cancelled by the user or system administrator. The job may or may not have been initiated.
CD COMPLETED Job has terminated all processes on all nodes.
CG COMPLETING Job is in the process of completing. Some processes on some nodes may still be active.
CF CONFIGURING Job has been allocated resources, but are waiting for them to become ready for use (e.g. booting).
F FAILED Job terminated with non-zero exit code or other failure condition.
NF NODE_FAIL Job terminated due to failure of one or more allocated nodes.
PD PENDING Job is awaiting resource allocation.
PR PREEMPTED Job terminated due to preemption.
R RUNNING Job currently has an allocation.
S SUSPENDED Job has an allocation, but execution has been suspended.
TO TIMEOUT Job terminated upon reaching its time limit.
ENVIRONMENT VARIABLES
The following environment variables can be used to override settings compiled into smap.
SLURM_CONF The location of the SLURM configuration file.
COPYING
Copyright (C) 2004-2007 The Regents of the University of California. Copyright (C) 2008-2009 Lawrence Livermore National Security. Pro-
duced at Lawrence Livermore National Laboratory (cf, DISCLAIMER). CODE-OCEC-09-009. All rights reserved.
This file is part of SLURM, a resource management program. For details, see <http://www.schedmd.com/slurmdocs/>.
SLURM is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option) any later version.
SLURM is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
SEE ALSO
scontrol(1), sinfo(1), squeue(1), slurm_load_ctl_conf (3), slurm_load_jobs (3), slurm_load_node (3), slurm_load_partitions (3),
slurm_reconfigure (3), slurm_shutdown (3), slurm_update_job (3), slurm_update_node (3), slurm_update_partition (3), slurm.conf(5)
smap 2.2 Mar 2010 SMAP(1)