PSREPORT(1) User Commands PSREPORT(1)NAME
psreport: - report on the packets in a Program Stream
SYNOPSIS
psreport [switches] <infile>
DESCRIPTION
TS tools version 1.11, psreport built Nov 11 2008 17:15:47
Report on the packets in a Program Stream.
Files:
<infile>
is an H.222 Program Stream file (but see -stdin)
Switches:
-stdin Input from standard input, instead of a file
-verbose, -v
Output packet data as well.
-max <n>, -m <n>
Maximum number of PS packets to read
-dvd The PS data is from a DVD. This is the default. This switch has no effect on MPEG-1 PS data.
-notdvd, -nodvd
The PS data is not from a DVD. The DVD specification stores AC-3 (Dolby), DTS and other audio in a specialised manner in pri-
vate_stream_1.
TS tools version 1.11, psreport built Nov 11 2008 17:15:47
Report on the packets in a Program Stream.
Files:
<infile>
is an H.222 Program Stream file (but see -stdin)
Switches:
-stdin Input from standard input, instead of a file
-verbose, -v
Output packet data as well.
-max <n>, -m <n>
Maximum number of PS packets to read
-dvd The PS data is from a DVD. This is the default. This switch has no effect on MPEG-1 PS data.
-notdvd, -nodvd
The PS data is not from a DVD. The DVD specification stores AC-3 (Dolby), DTS and other audio in a specialised manner in pri-
vate_stream_1.
SEE ALSO
The full documentation for psreport is maintained as a Texinfo manual. Please check http://tstools.berlios.de for more information.
psreport 1.11 November 2008 PSREPORT(1)
Check Out this Related Man Page
STREAM_TYPE(1) User Commands STREAM_TYPE(1)NAME
stream_type - attempt to determine if an input stream is TS, PS, or ES
SYNOPSIS
stream_type [switches] <infile>
DESCRIPTION
TS tools version 1.11, stream_type built Nov 11 2008 17:15:48
Attempt to determine if an input stream is Transport Stream, Program Stream, or Elementary Stream, and if the latter, if it is H.262
or H.264 (i.e., MPEG-2 or MPEG-4/AVC respectively). The mechanisms used are fairly crude, assuming that: - data is byte aligned -
for TS, the first byte in the file will be the start of a NAL unit,
and PAT/PMT packets will be findable
- for PS, the first packet starts immediately at the start of the
file, and is a pack header
- if the first 1000 packets could be H.262 *or* H.264, then the data
is assumed to be H.264 (the program doesn't try to determine sensible sequences of H.262/H.264 packets, so this is a reasonable way
of guessing)
It is quite possible that data which is not relevant will be misidentified
The program exit value is: * 10 if it detects Transport Stream, * 11 if it detects Program Stream, * 12 if it detects Elementary
Stream containing H.262 (MPEG-2), * 14 if it detects Elementary Stream containing H.264 (MPEG-4/AVC), * 5 if it looks like it
might be PES, * 9 if it really cannot decide, or * 0 if some error occurred
Files:
<infile>
is the file to analyse
Switches:
-verbose, -v
Output more detailed information about how it is making its decision
-quiet, -q
Only output error messages
TS tools version 1.11, stream_type built Nov 11 2008 17:15:48
Attempt to determine if an input stream is Transport Stream, Program Stream, or Elementary Stream, and if the latter, if it is H.262
or H.264 (i.e., MPEG-2 or MPEG-4/AVC respectively). The mechanisms used are fairly crude, assuming that: - data is byte aligned -
for TS, the first byte in the file will be the start of a NAL unit,
and PAT/PMT packets will be findable
- for PS, the first packet starts immediately at the start of the
file, and is a pack header
- if the first 1000 packets could be H.262 *or* H.264, then the data
is assumed to be H.264 (the program doesn't try to determine sensible sequences of H.262/H.264 packets, so this is a reasonable way
of guessing)
It is quite possible that data which is not relevant will be misidentified
The program exit value is: * 10 if it detects Transport Stream, * 11 if it detects Program Stream, * 12 if it detects Elementary
Stream containing H.262 (MPEG-2), * 14 if it detects Elementary Stream containing H.264 (MPEG-4/AVC), * 5 if it looks like it
might be PES, * 9 if it really cannot decide, or * 0 if some error occurred
Files:
<infile>
is the file to analyse
Switches:
-verbose, -v
Output more detailed information about how it is making its decision
-quiet, -q
Only output error messages
SEE ALSO
The full documentation for stream_type is maintained as a Texinfo manual. Please check http://tstools.berlios.de for more information.
stream_type 1.11 November 2008 STREAM_TYPE(1)