MOU2GMN(1) General Commands Manual MOU2GMN(1)NAME
mou2gmn - convert MapsOnUS files into GPSManager files
SYNOPSIS
mou2gmn [port]
DESCRIPTION
This manual page documents briefly the mou2gmn command.
This manual page was written for the Debian GNU/Linux distribution because the original program does not have a manual page. Instead, it
has documentation in /usr/share/doc/gpsman.
gpsman GPS Manager (GPSMan) is a graphical manager of GPS data that makes possible the preparation, inspection and edition of GPS data in a
friendly environment. GPSMan supports communication and real-time logging with both Garmin and Lowrance receivers and accepts real-time
logging information in NMEA0183 from any GPS receiver.
To comunicate with the GPS device the user must have granted read/write permissions for the respective port.
AUTHOR
This manual page was written by Rogerio Reis <rvr@ncc.up.pt>, for the Debian GNU/Linux system (but may be used by others).
MOU2GMN(1)
Check Out this Related Man Page
GPSCORRELATE(1) [FIXME: manual] GPSCORRELATE(1)NAME
gpscorrelate - correlates digital images with GPS data filling EXIF fields
SYNOPSIS
gpscorrelate [-z | --timeadd +/-HH[:MM]] [-O | --photooffset seconds] [-i | --no-interpolation] [-v | --verbose] [-d | --datum datum] [-n |
--no-write] [-m | --max-dist time] [-t | --ignore-tracksegs] [-M | --no-mtime] [-f | --fix-timestamps] [-p | --degmins]
-g file.gpx image.jpg...
gpscorrelate -s | --show | -o | --machine image.jpg...
gpscorrelate [-M | --no-mtime] {-r | --remove} image.jpg...
gpscorrelate -V | --version | -h | --help
gpscorrelate-gui
DESCRIPTION
This manual page documents briefly the gpscorrelate and gpscorrelate-gui commands.
There is an extended documenation available in HTML format; see below.
gpscorrelate is a program that acts on digital images in JPEG format filling EXIF (Exchangeable Image File Format) fields related to GPS
(Global Positioning System) information. Source for the GPS data is a record of GPS information encoded in GPX (GPS Exchange Format)
Format. The act of filling those fields is referred to as correlation.
If GPS data are available at the precise moment the image was taken (with a 1-second granularity) the GPS data are stored unmodified in
EXIF fields. If they are not linear interpolation of GPS data available at moments before and after the image was taken can be used.
gpscorrelate is a command line tool implementing correlation whereas gpscorrelate-gui is the corresponding GTK+ graphical user interface.
OPTIONS
These programs follow the usual GNU command line syntax, with long options starting with two dashes (`-'). A summary of options is included
below. For a complete description, see the HTML documentation.
-g, --gps file.gpx
correlate using the specified GPX file with GPS data
-s, --show
only show the GPS data of the given images
-o, --machine
only show the GPS data of the given images in a machine readable output, if there is any
-r, --remove
only remove GPS EXIF data from the given images
-z, --timeadd +/-XX[:XX]
time to add to GPS data to make it match the timestamps of the images. GPS data is in UTC; images are not likely to be in UTC. Enter
the timezone used when taking the images: eg, +8 for Perth
-O, --photooffset seconds
time in seconds to add to the photo timestamp to make it match the GPS timestamp. To determine the amount of seconds needed, just
create a picture of your GPS device showing the current time and compare it with the timestamp of your photo file.
-i, --no-interpolation
disable interpolation between points. Interpolation is linear, points are rounded if disabled
-v, --verbose
show which GPS data has been selected for each image
-d, --datum datum
specify measurement datum. If not set, WGS-84 used
-n, --no-write
do not write the exif data. Useful with --verbose
-m, --max-dist time
max time outside points that image will be matched. Time is in seconds
-t, --ignore-tracksegs
Interpolate between track segments, too
-M, --no-mtime
Do not change mtime of modified files
-f, --fix-timestamps
Fix broken GPS datestamps written with versions < 1.5.2
-p, --degmins
Write location as DD MM.MM as was default before < 1.5.3
-h, --help
Only show summary of options
-V, --version
Only print the version
SEE ALSO
gpsd (1), gpsbabel (1), gpxlogger (1), cgpxlogger (1).
The documentation of gpscorrelate and gpscorrelate-gui in HTML format are available on the filesystem at /usr/share/doc/gpscorrelate.
AUTHOR
This manual page was initially written by Stefano Zacchiroli zack@debian.org for the Debian(TM) system. It was extended by Till Maas
opensource@till.name. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU General Public
License, Version 2 any later version published by the Free Software Foundation.
On Debian systems, the complete text of the GNU General Public License can be found in /usr/share/common-licenses/GPL.
AUTHOR
Stefano Zacchiroli
Author.
COPYRIGHT
Copyright (C) 2006, 2008 Stefano Zacchiroli zack@debian.org, Till Maas
[FIXME: source] 30 Oct 2008 GPSCORRELATE(1)