irman2lirc(1) FSF irman2lirc(1)NAME
irman2lirc - converts irman.conf to lirc config file
SYNOPSIS
irman2lirc [file]
DESCRIPTION
If you already have a propper configuration file (irman.conf) for the libirman package, irman2lirc will convert it to lirc syntax with
irman2lirc.
--help display usage summary
SEE ALSO
The documentation for lirc is maintained as a html pages. They are located under html/ in the documentadion directory.
irman2lirc November 2001 irman2lirc(1)
Check Out this Related Man Page
SMODE2(1) FSF SMODE2(1)NAME
mode2, smode2, xmode2 - shows the pulse/space length of infrared signals
SYNOPSIS
smode2 [options]
DESCRIPTION
The main purpose of these programs is to check operation of your home-brew LIRC receiver hardware and to see the IR waveform of the remote
controller without an expensive oscilloscope. Very useful for debugging. Of course this program won't work with hardware that decodes the
signals itself like e.g. TV cards or the Irman.
smode2 uses the svgalib to show the IR waveform in a graphical representation. The time division is variable from 1 ms/unit to extremely
high values (integer type) but there is no point increasing this value above 20 ms/unit, because one pulse is about 1 ms. This kind of pre-
sentation is much more exciting than the simple pulse&space output showed by mode2.
-h --help
display usage summary
-v --version
display version
-d --device=device
read from given device
-t --timediv=value
ms per unit
SEE ALSO mode2(1), smode2(1), xmode2(1)
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
smode2 0.8.7pre1 May 2010 SMODE2(1)
I have a huge matrix file containing some 1.5 million rows and 6000 columns. The matrix looks something like this:
1 2 3
4 5 6
7 8 9
3 4 5
I want to add all the numbers in the columns of this matrix and display the result to my stdout. This means that the numbers in the first column are:
... (2 Replies)
Hi,
Just trying to get to grips with sed and awk for some reporting for work and I need some assistance:
I have a file that lists policy names on the first line and then on the second line whether the policy is active or not.
Policy Name: Policy1
Active: yes
Policy... (8 Replies)
version info :
vi availabe with RHEL 5.4
I have a text file with 10,000 lines. I want to copy lines from 5000th line to 7000th and redirect to a file. Any idea how I can do this?
Note:
The above scenario is just an example. In my actual requirement, the file has 14 million lines and I want... (9 Replies)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello,
I couldn't find an actual introduction thread, so I decided to just put this here.
I go by d0wngrade online. I have been programming in multiple languages for about 15+ years. I started with standard web design languages like HTML and CSS, but I then advanced from design to development... (2 Replies)
Hi guys...
The first active code line in AudioScope.sh is set -u .
This causes a complete exit if a variable is used/found but has not been allocated at the start of the program.
However, apart from writing code to do the task, is there a switch to to check which variables have been... (17 Replies)
Hi.
In thread https://www.unix.com/shell-programming-and-scripting/267833-grouping-counting.html rovf and I had a mini-discussion on grep and awk.
Here is a demo script that compares the awk and grep approaches for this single problem:
#!/usr/bin/env bash
# @(#) s2 Demonstrate group... (1 Reply)
Hello,
I have to fish out some specific columns from a file based on the header value. I have the list of columns I need in a different file. I thought I could read in the list of headers I need,
# file with header names of required columns in required order
headers_file=$2
# read contents... (11 Replies)
For those interested in installing dash shell on OSX Lion to help test POSIX compliancy of shell scripts, it is quite easy. I did it like this:
If you don't have gcc on your system:
0. Download and install the Command Line Tools for Xcode package from Sign In - Apple *
1. Download the dash... (2 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
I have data of an excel files as given below,
file1
org1_1 1 1 2.5 100
org1_2 1 2 5.5 98
org1_3 1 3 7.2 88
file2
org2_1 1 1 2.5 100
org2_2 1 2 5.5 56
org2_3 1 3 7.2 70
I have multiple excel files as above shown.
I have to copy column 1, column 4 and paste into a new excel file as... (26 Replies)
Dear All,
Taking a break from Vue.js coding for the site, SEO and YT videos; and hopefully addressing some well deserved criticism from some here that I have been too focused on the visual aspects of the forums versus the substance and the community....
While the "current generation... (9 Replies)
Hi all...
Well guys and gals, I jumped in at the deep end and found things that PERL cannot do by default.
Many tricky terminal escape codes are not catered for so I had to create workarounds.
One thing I searched for was this:
Passing perl variable to shell command
AND, @Neo this was... (15 Replies)