dclock(1) General Commands Manual dclock(1)NAME
dclock - digital clock
SYNOPSIS
dclock [ -cmjd ] [ -sslant ] [ -tthickness ] [ -frate ]
DESCRIPTION
Dclock displays a scalable digital clock. The time is updated from the local host clock every minute as a background process. The current
date is displayed across the top of the window in the format
Sat Aug 16 1986
(or some subset of such if there's not enough room). Options to control the clock's appearance, size and placement are as follows:
-c Display in 12-hour format ("civilian" time) -- the default.
-m Display in 24-hour format ("military" time).
-j "John's flag." Puts a tail on the digit `9'.
-d Do not display the current date across the top of the clock view.
-b Display a border (horizontal line) between the date string and the time display.
-T Do not display the Time in the clock view (leaving just the date).
-sslant Set the slant of the digits. A slant of 100 (the maximum) corresponds to a slant of one digit width. A slant of 0 (the
minimum) is vertical. Default is -s30. A special form is -s, which is equivalent to -s0.
-tthickness Set the thickness of the digit segments. Allowable values are between 5 and 25. A thickness of 25 results in segments
which are one quarter (25%) of the digit width. Default is -t15.
-frate Set the rate at which the segments fade when the time changes. A value of 0 is fastest and 4 is slowest. Default is -f4.
A special form is -f, which is equivalent to -f0.
To exit dclock, type a `q' in the window.
dclock(1)
Check Out this Related Man Page
CLOCK(1) General Commands Manual CLOCK(1)NAME
clock - display the time in an icon or window
SYNOPSIS
clock
AVAILABILITY
This command is available with the OpenWindows environment. For information about installing OpenWindows, refer to the OpenWindows Instal-
lation and Start-Up Guide.
DESCRIPTION
clock is an OpenWindows XView utility that displays the current time in a window or icon. When the window is open, clock can display the
time in either analog or digital format. The clock window is scalable in either format.
USAGE
When the clock window is open, it has a floating menu from which you can bring up a property window. From this property sheet, you can
modify the display of the tool by selecting either the Analog or Digital choice box.
Seconds:
On the analog version, this selection starts a second hand on the face of the clock. On the digital version, it adds two dig-
its to the digital readout.
Date:
Turns on a date display for both analog and digital versions of clock.
BUGS
If you reset the system time, clock will not reflect the new time until you change its window state from open to icon, or vice versa. To
reset the system time, see date (1V).
The date display does not go well with the round clock face.
Occasionally, when clock is uncovered, the face will be visually corrupted. Use the Refresh button from the frame menu to repair.
11 June 1990 CLOCK(1)
Hey ppl, i was wonddering, in mandrake, how to get the clok to display the time in non-military format....hehe thank you im just tired of looking at 18:00 hehe thank you (2 Replies)
Hi buddies,
I have a doubt. I want to display filename with date in the following format.Is there any way to do this. Kindly give me the solution.
I want to display the result in the following manner.
test1.txt 03/28/2008
testlog.log 02/20/2008
Please let me know one solution how to do... (1 Reply)
Hi folks,
I need to write a script that should activate a process according to the current hour.
The process should be activatet only if the hour is between midnight (00:00) and 07:00.
How should I create the condition?
Thanks in advance,
Nir (2 Replies)
Hi,
I have a log file without date/time, and I want that everytime tail|grep find something it displays the date/time and the line. I have tried something like this command but without any luck to display the date/time:
tail -F catalina.out | sed "s/^/`date `/" | egrep ... (6 Replies)
Hello People,
How can I display the date in a continuous format along with the time as below :
20091001_154547
i.e yyyymmdd_hhmmss format.
Thanks. (3 Replies)
I have tried various arguments to get the date display as "Mar 10".
I have tried
date +"%c" -------> Wed Mar 10 11:51:21 EST 2010
date +"%b%d%Y_%H%M%S" --------> Mar102010_115121
date +"%b%d" -------> Mar10
date +"%t%b%e" ... (3 Replies)
Hi,
I want to know how we can view two or three logs which are dynamically getting updated from a single/same putty window with tail commnad.
Thanks. (7 Replies)
Hi All,
I need to recursively grep several folders for a MAC address and display the results with the date of the file name at the start. Even better would be if the final results were displayed chronologically so the newest file is always at the end. Oldest at the top, regardless of what... (8 Replies)
I would like to be able to display the local time (or anytime for that matter) when I run Xentop in batch mode. Is that possible? (In other words, when I look back at the data, I want to be able to tell what time that the output was displayed). (2 Replies)
Hi,
I have one hp-ux sytem date display problem when viewed remotely
hostA 21: date
Fri Jul 5 11:18:51 SST 2013
hostA 22: remsh hostB -l username -n date
2013年07月05日 11時32分27秒
But on actual system it display correctly:confused:
hostB 21: date
Fri Jul 5 11:40:33 SST 2013 (4 Replies)