MPT_DO_UPLOAD(9) Message-based devices MPT_DO_UPLOAD(9)NAME
mpt_do_upload - Construct and Send FWUpload request to MPT adapter port.
SYNOPSIS
int mpt_do_upload(MPT_ADAPTER * ioc, int sleepFlag);
ARGUMENTS
ioc
Pointer to MPT_ADAPTER structure
sleepFlag
Specifies whether the process can sleep
DESCRIPTION
Returns 0 for success, >0 for handshake failure <0 for fw upload failure.
REMARK
If bound IOC and a successful FWUpload was performed on the bound IOC, the second image is discarded and memory is free'd. Both channels
must upload to prevent IOC from running in degraded mode.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 MPT_DO_UPLOAD(9)
Check Out this Related Man Page
ib(4) File Formats ib(4)NAME
ib - InfiniBand device driver configuration files
DESCRIPTION
The InfiniBand (IB) bus is an I/O transport based on switched fabrics. IB devices are managed by the ib(7D) nexus driver. There are three
categories of InfiniBand devices:
o IB port/IB VPPA/IB HCA_SVC devices
o IB IOC devices
o IB Psuedo devices
The IB port/IB VPPA/IB HCA_SVC devices are enumerated by way of the ib.conf file. See ib(7D).
The IB IOC devices are enumerated using the InfiniBand Device management class. See ibdm(7D).
For devices not in these two categories, most notably IB Psuedo devices, the driver must provide configuration files to inform the system
of the IB devices to be created. Configuration parameters are represented in the form of name value pairs you can retrieve using the DDI
property interfaces. See ddi_prop_op(9F) for details.
Configuration files for IB device drivers must identify the parent driver explicitly as "ib," and must create a string array property
called "unit-address" which is unique to this entry in the configuration file. Drivers name "ibport" and "ioc" are reserved by ib(7D) and
should not be used.
Each entry in the configuration file creates a prototype devinfo node. Each node is assigned a unit address which is determined by the
value of the "unit-address" property. This property is only applicable to children of the IB parent and is required. See driver.conf(4)
for further details on configuration file syntax.
EXAMPLES
Example 1: Sample configuration file
Here is a configuration file called ibgen.conf for an IB device driver that implements a generic IB driver. This file creates a node
called "ibgen."
#
# Copyright 2002-2003 Sun Microsystems, Inc. All rights reserved.
# Use is subject to license terms.
#
#ident "@(#)ibgen.conf 1.3 03/05/01 SMI"
name="ibgen" parent="ib" unit-address="0";
SEE ALSO driver.conf(4), ib(7D), ibtl(7D), ddi_prop_op(9F)SunOS 5.10 19 Feb 2004 ib(4)
Hi everyone,
I know the following questions are noobish questions but I am asking them because I am confused about the basics of history behind UNIX and LINUX.
Ok onto business, my questions are-:
Was/Is UNIX ever an open source operating system ?
If UNIX was... (21 Replies)
Hello and thanks in advance for any help anyone can offer me
I'm trying to learn the find command and thought I was understanding it... Apparently I was wrong. I was doing compound searches and I started getting weird results with the -size test. I was trying to do a search on a 1G file owned by... (14 Replies)
hi all,
i have installed quota on my centos 7 machine and its what im after (setting size limit on users, so they cant fill the hard drive)
i want to now make this part of my create user script for my sftp server so i want to do a echo and a read command so i capture the limit they enter... (0 Replies)
Hi everybody,
Which Unix base OS have best performance for HOST virtualization?
I tested SmartOS but it needs another OS to connect remotely!
Thanks in advance. (11 Replies)
Hi All,
I need to write a shell script which opens a file and increments the version(text) within the file every time the script runs. For example:
$ cat docker_file.yml
version: '3.1'
services:
ui:
image: repo-srv.dev.io:5000/facebook/ui:0.0.2-QA1
$
So, I would like... (6 Replies)
Dear Team
We use DB2 v10.5 and using DBArtisan tool
Can someone please guide how to convert digits to binary numbers using db2 feature.
Ex> for number 9 , binary should be 1001 ( 8+1)
Any help appreciated. Thanks (2 Replies)
hi folks,
how to using tar with exclude directory and compress it using tar.Z
i only know how to exclude dir only with this command below:
tar -cvf /varios/restore/test.tar -X excludefile.txt /jfma/test1/
how to compress it using 1 command?
Thanx
Please use CODE tags as... (6 Replies)
Quite an obscure question I think.
We have a rebuild process for remote sites that allows us to PXE rebuild a till (actually a PC with a touch screen and various fancy bits) running CentOS. The current CentOS5 tills work just fine with a tar image restore and some personalisation. Sadly,... (4 Replies)
Hello All,
I had recently learnt a bit of Docker(which provides containerization process).
Here are some of my learning points from it.
Let us start first with very basic question:
What is Docker:
Docker is a platform for sysadmins and developers to DEPLOY, DEVELOP and RUN applications ... (7 Replies)
What is the point of this? Whenever I close my shell it appends to the history file without adding this. I have never seen it overwrite my history file.
# When the shell exits, append to the history file instead of overwriting it
shopt -s histappend (3 Replies)
Hello... And thanks in advance for any help anyone can offer me
I was trying to work out the differences between displaying modify, access, and change times with the 'ls' command. Everything seems in order when I look at files, but the access time on a directory doesn't seem to change when I... (4 Replies)
Hello everyone,
I am having an issue here with CentOS release 6.6 (Final) that shows all of the space used up, but I can't tell where the space went.
Seemingly I am using up 100%, according to
df -h
Filesystem Size Used Avail Use% Mounted on... (27 Replies)
I'm trying to use a bash script for a psych experiment that involves listening to sound files and responding. If I have something like the code below, how can I make sure that a key press is assigned to RESPONSE only after the second echo statement?
for i in 1 2 3; do
echo "Ready?"
sleep 2
... (10 Replies)
After the success of the jq - tool for parsing and manipulating JSON-Data someone wrote a tool called yq, which aims to be the same for YAML, what jq is for JSON. Seems to work fine. I'll definitely give it a chance in future.
Example YAML-File:
--- !ruby/object:Puppet::Node::Facts
... (1 Reply)
Dear All,
I am very pleased to announce that Dave Munro (gull04) is joining the Moderation Team, after being a very valuable member of UNIX.com for 15+ years.
Dave is an IT Consultant with 30 years of experience this year, has worked in many of the industry vertical market segments and has... (6 Replies)