FC_BLOCK_SCSI_EH(9) SCSI mid layer FC_BLOCK_SCSI_EH(9)NAME
fc_block_scsi_eh - Block SCSI eh thread for blocked fc_rport
SYNOPSIS
int fc_block_scsi_eh(struct scsi_cmnd * cmnd);
ARGUMENTS
cmnd
SCSI command that scsi_eh is trying to recover
DESCRIPTION
This routine can be called from a FC LLD scsi_eh callback. It blocks the scsi_eh thread until the fc_rport leaves the FC_PORTSTATE_BLOCKED,
or the fast_io_fail_tmo fires. This is necessary to avoid the scsi_eh failing recovery actions for blocked rports which would lead to
offlined SCSI devices.
RETURNS
0 if the fc_rport left the state FC_PORTSTATE_BLOCKED. FAST_IO_FAIL if the fast_io_fail_tmo fired, this should be passed back to scsi_eh.
AUTHORS
James Bottomley <James.Bottomley@hansenpartnership.com>
Author.
Rob Landley <rob@landley.net>
Author.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 FC_BLOCK_SCSI_EH(9)
Check Out this Related Man Page
FC_REMOTE_PORT_DELET(9) SCSI mid layer FC_REMOTE_PORT_DELET(9)NAME
fc_remote_port_delete - notifies the fc transport that a remote port is no longer in existence.
SYNOPSIS
void fc_remote_port_delete(struct fc_rport * rport);
ARGUMENTS
rport
The remote port that no longer exists
DESCRIPTION
The LLDD calls this routine to notify the transport that a remote port is no longer part of the topology. Note: Although a port may no
longer be part of the topology, it may persist in the remote ports displayed by the fc_host. We do this under 2 conditions: 1) If the port
was a scsi target, we delay its deletion by "blocking" it. This allows the port to temporarily disappear, then reappear without disrupting
the SCSI device tree attached to it. During the "blocked" period the port will still exist. 2) If the port was a scsi target and disappears
for longer than we expect, we'll delete the port and the tear down the SCSI device tree attached to it. However, we want to semi-persist
the target id assigned to that port if it eventually does exist. The port structure will remain (although with minimal information) so that
the target id bindings remails.
If the remote port is not an FCP Target, it will be fully torn down and deallocated, including the fc_remote_port class device.
If the remote port is an FCP Target, the port will be placed in a temporary blocked state. From the LLDD's perspective, the rport no longer
exists. From the SCSI midlayer's perspective, the SCSI target exists, but all sdevs on it are blocked from further I/O. The following is
then expected.
If the remote port does not return (signaled by a LLDD call to fc_remote_port_add) within the dev_loss_tmo timeout, then the scsi target is
removed - killing all outstanding i/o and removing the scsi devices attached ot it. The port structure will be marked Not Present and be
partially cleared, leaving only enough information to recognize the remote port relative to the scsi target id binding if it later appears.
The port will remain as long as there is a valid binding (e.g. until the user changes the binding type or unloads the scsi host with the
binding).
If the remote port returns within the dev_loss_tmo value (and matches according to the target id binding type), the port structure will be
reused. If it is no longer a SCSI target, the target will be torn down. If it continues to be a SCSI target, then the target will be
unblocked (allowing i/o to be resumed), and a scan will be activated to ensure that all luns are detected.
Called from normal process context only - cannot be called from interrupt.
NOTES
This routine assumes no locks are held on entry.
AUTHORS
James Bottomley <James.Bottomley@hansenpartnership.com>
Author.
Rob Landley <rob@landley.net>
Author.
COPYRIGHT Kernel Hackers Manual 3.10 June 2014 FC_REMOTE_PORT_DELET(9)