fence_idrac(8) [centos man page]
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME
fence_ipmilan - Fence agent for IPMI over LAN fence_ilo3 - Fence agent for HP iLO3 (symlink) fence_ilo4 - Fence agent for HP iLO4 (symlink) fence_idrac - Fence agent for Dell iDRAC (symlink) fence_imm - Fence agent for IBM Integrated Management Module (symlink) DESCRIPTION
fence_ipmilan is an I/O Fencing agent which can be used with machines controlled by IPMI. This agent calls support software using ipmitool (http://ipmitool.sf.net/). To use fence_ipmilan with HP iLO 3 or HP iLO 4 you have to enable lanplus option (lanplus / -P) and increase wait after operation to 4 sec- onds (power_wait=4 / -T 4) fence_ipmilan accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ipmilan can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.intel.com PARAMETERS
-A IPMI Lan Auth type (md5, password, or none) -a IPMI Lan IP to talk to This parameter is always required. -p Password (if required) to control power on IPMI device -S Script to retrieve password (if required) -P Use Lanplus to improve security of connection -l Username/Login (if required) to control power on IPMI device -o Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata (Default Value: reboot) -t Timeout (sec) for IPMI operation -C Ciphersuite to use (same as ipmitool -C parameter) -M Method to fence (onoff or cycle) (Default Value: onoff) -T Wait X seconds after on/off operation (Default Value: 2) -f Wait X seconds before fencing is started -L Privilege level on IPMI device -v Verbose mode ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. diag The operational behavior of this is not known. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check the health of fence device metadata Display the XML metadata describing this resource. STDIN PARAMETERS
auth IPMI Lan Auth type (md5, password, or none) ipaddr IPMI Lan IP to talk to This parameter is always required. passwd Password (if required) to control power on IPMI device passwd_script Script to retrieve password (if required) lanplus Use Lanplus to improve security of connection login Username/Login (if required) to control power on IPMI device action Operation to perform. Valid operations: on, off, reboot, status, list, diag, monitor or metadata (Default Value: reboot) timeout Timeout (sec) for IPMI operation cipher Ciphersuite to use (same as ipmitool -C parameter) method Method to fence (onoff or cycle) (Default Value: onoff) power_wait Wait X seconds after on/off operation (Default Value: 2) delay Wait X seconds before fencing is started privlvl Privilege level on IPMI device verbose Verbose mode fence_ipmilan (Fence Agent) 2009-10-20 FENCE_AGENT(8)
Check Out this Related Man Page
FENCE_AGENT(8) System Manager's Manual FENCE_AGENT(8) NAME
fence_ilo - Fence agent for HP iLO DESCRIPTION
fence_ilo is an I/O Fencing agent used for HP servers with the Integrated Light Out (iLO) PCI card.The agent opens an SSL connection to the iLO card. Once the SSL connection is established, the agent is able to communicate with the iLO card through an XML stream. fence_ilo accepts options on the command line as well as from stdin. Fenced sends parameters through stdin when it execs the agent. fence_ilo can be run by itself with command line options. This is useful for testing and for turning outlets on or off from scripts. Vendor URL: http://www.hp.com PARAMETERS
-o, --action=<action> Fencing Action (Default Value: reboot) -a, --ip=<ip> IP Address or Hostname This parameter is always required. -l, --username=<name> Login Name This parameter is always required. -p, --password=<password> Login password or passphrase -S, --password-script=<script> Script to retrieve password -z, --ssl SSL connection (Default Value: true) -r, --ribcl-version=<version> Force ribcl version to use -4, --inet4-only Forces agent to use IPv4 addresses only -6, --inet6-only Forces agent to use IPv6 addresses only -u, --ipport=<port> TCP port to use for connection with device -v, --verbose Verbose mode -D, --debug-file=<debugfile> Write debug information to given file -V, --version Display version information and exit -h, --help Display help and exit --power-timeout Test X seconds for status change after ON/OFF (Default Value: 20) --shell-timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) --login-timeout Wait X seconds for cmd prompt after login (Default Value: 10) --power-wait Wait X seconds after issuing ON/OFF (Default Value: 0) --delay Wait X seconds before fencing is started (Default Value: 0) --retry-on Count of attempts to retry power on (Default Value: 3) ACTIONS
on Power on machine. off Power off machine. reboot Reboot machine. status This returns the status of the plug/virtual machine. list List available plugs with aliases/virtual machines if there is support for more then one device. Returns N/A otherwise. monitor Check if fencing device is running. List available plugs/virtual machines or get status of machine (if it does not support more). metadata The operational behavior of this is not known. STDIN PARAMETERS
action Fencing Action (Default Value: reboot) ipaddr IP Address or Hostname This parameter is always required. login Login Name This parameter is always required. passwd Login password or passphrase passwd_script Script to retrieve password ssl SSL connection (Default Value: true) ribcl Force ribcl version to use inet4_only Forces agent to use IPv4 addresses only inet6_only Forces agent to use IPv6 addresses only ipport TCP port to use for connection with device verbose Verbose mode debug Write debug information to given file version Display version information and exit help Display help and exit power_timeout Test X seconds for status change after ON/OFF (Default Value: 20) shell_timeout Wait X seconds for cmd prompt after issuing command (Default Value: 3) login_timeout Wait X seconds for cmd prompt after login (Default Value: 10) power_wait Wait X seconds after issuing ON/OFF (Default Value: 0) delay Wait X seconds before fencing is started (Default Value: 0) retry_on Count of attempts to retry power on (Default Value: 3) fence_ilo (Fence Agent) 2009-10-20 FENCE_AGENT(8)