Linux and UNIX Man Pages

Linux & Unix Commands - Search Man Pages

cups-browsed.conf(5) [centos man page]

cups-browsed.conf(5)													      cups-browsed.conf(5)

cups-browsed.conf - server configuration file for cups-browsed DESCRIPTION
The cups-browsed.conf file configures the cups-browsed daemon. It is normally located in the /etc/cups directory. Each line in the file can be a configuration directive, a blank line, or a comment. Comment lines start with the # character. DIRECTIVES
The BrowseAllow directive specifies a system or network to accept CUPS browse packets from. The default is to accept browse packets from all hosts when BrowseRemoteProtocols uses the CUPS protocol. BrowseAllow BrowseAllow BrowseAllow The BrowsePoll directive polls a server for available printers once every 60 seconds. Multiple BrowsePoll directives can be specified to poll multiple servers. The default port to connect to is 631. BrowsePoll works independently of whether CUPS browsing is activated in BrowseRemoteProtocols. BrowsePoll BrowsePoll BrowsePoll The BrowseLocalProtocols directive specifies the protocols to use when advertising local shared printers on the network. The default is "none". Control of advertising of local shared printers using dnssd is done in /etc/cups/cupsd.conf. BrowseLocalProtocols none BrowseLocalProtocols CUPS The BrowseRemoteProtocols directive specifies the protocols to use when finding remote shared printers on the network. Multiple protocols can be specified by separating them with spaces. The default is "dnssd cups". BrowseRemoteProtocols none BrowseRemoteProtocols CUPS dnssd BrowseRemoteProtocols CUPS BrowseRemoteProtocols dnssd The BrowseProtocols directive specifies the protocols to use when finding remote shared printers on the network and advertising local shared printers. "dnssd" is ignored for BrowseLocalProtocols. Multiple protocols can be specified by separating them with spaces. The default is "none" for BrowseLocalProtocols and "dnssd cups" for BrowseRemoteProtocols. BrowseProtocols none BrowseProtocols CUPS dnssd BrowseProtocols CUPS BrowseProtocols dnssd SEE ALSO
cups-browsed(8) /usr/share/doc/cups-filters/README AUTHOR
The authors of cups-browsed are listed in /usr/share/doc/cups-filters/AUTHORS. This manual page was written for the Debian Project, but it may be used by others. 29 June 2013 cups-browsed.conf(5)

Check Out this Related Man Page

cups-snmp(8)							    Apple Inc.							      cups-snmp(8)

snmp - cups snmp backend SYNOPSIS
/usr/lib/cups/backend/snmp ip-address-or-hostname lpinfo -v --include-schemes snmp DESCRIPTION
The CUPS SNMP backend provides legacy discovery and identification of network printers using SNMPv1. When used for discovery through the scheduler, the backend will list all printers that respond to a broadcast SNMPv1 query with the "public" community name. Additional queries are then sent to printers that respond in order to determine the correct device URI, make and model, and other information needed for printing. In the first form, the SNMP backend is run directly by the user to look up the device URI and other information when you have an IP address or hostname. This can be used for programs that need to configure print queues where the user has supplied an address but nothing else. In the second form, the SNMP backend is run indirectly using the lpinfo(8) command. The output provides all printers detected via SNMP on the configured broadcast addresses. Note: no broadcast addresses are configured by default. MIBS
The CUPS SNMP backend uses the information from the Host, Printer, and Port Monitor MIBs along with some vendor private MIBs and intelli- gent port probes to determine the correct device URI and make and model for each printer. CONFIGURATION
The SNMP backend reads the /etc/cups/snmp.conf configuration file, if present, to set the default broadcast address, community name, and logging level. The configuration file is documented in cups-snmp.conf(5). The DebugLevel value can be overridden using the CUPS_DEBUG_LEVEL environment variable and the MaxRunTime value can be overridden using the CUPS_MAX_RUN_TIME environment variable. SEE ALSO
backend(7), cups-snmp.conf(5), cupsd(8), cupsd.conf(5), filter(7), lpinfo(8), http://localhost:631/help COPYRIGHT
Copyright 2007-2013 by Apple Inc. 23 April 2012 CUPS cups-snmp(8)
Man Page