|
Tk_SetOptions(3) Tk Library Procedures Tk_SetOptions(3)
_________________________________________________________________________________________________
NAME
Tk_CreateOptionTable, Tk_DeleteOptionTable, Tk_InitOptions, Tk_SetOptions, Tk_FreeSavedOp-
tions, Tk_RestoreSavedOptions, Tk_GetOptionValue, Tk_GetOptionInfo, Tk_FreeConfigOptions,
Tk_Offset - process configuration options
SYNOPSIS
#include <tk.h>
Tk_OptionTable
Tk_CreateOptionTable(interp, templatePtr)
Tk_DeleteOptionTable(optionTable)
int
Tk_InitOptions(interp, recordPtr, optionTable, tkwin)
int
Tk_SetOptions(interp, recordPtr, optionTable, objc, objv, tkwin, savePtr, maskPtr)
Tk_FreeSavedOptions(savedPtr)
Tk_RestoreSavedOptions(savedPtr)
Tcl_Obj *
Tk_GetOptionValue(interp, recordPtr, optionTable, namePtr, tkwin)
Tcl_Obj *
Tk_GetOptionInfo(interp, recordPtr, optionTable, namePtr, tkwin)
Tk_FreeConfigOptions(recordPtr, optionTable, tkwin)
int
Tk_Offset(type, field)
ARGUMENTS
Tcl_Interp *interp (in) A Tcl interpreter. Most procedures use this
only for returning error messages; if it is
NULL then no error messages are returned. For
Tk_CreateOptionTable the value cannot be NULL;
it gives the interpreter in which the option
table will be used.
const Tk_OptionSpec *templatePtr (in) Points to an array of static information that
describes the configuration options that are
supported. Used to build a Tk_OptionTable.
The information pointed to by this argument
must exist for the lifetime of the
Tk_OptionTable.
Tk_OptionTable optionTable (in) Token for an option table. Must have been
returned by a previous call to Tk_CreateOp-
tionTable.
char *recordPtr (in/out) Points to structure in which values of config-
uration options are stored; fields of this
record are modified by procedures such as
Tk_SetOptions and read by procedures such as
Tk_GetOptionValue.
Tk_Window tkwin (in) For options such as TK_OPTION_COLOR, this
argument indicates the window in which the
option will be used. If optionTable uses no
window-dependent options, then a NULL value
may be supplied for this argument.
int objc (in) Number of values in objv.
Tcl_Obj *const objv[] (in) Command-line arguments for setting configuring
options.
Tk_SavedOptions *savePtr (out) If not NULL, the structure pointed to by this
argument is filled in with the old values of
any options that were modified and old values
are restored automatically if an error occurs
in Tk_SetOptions.
int *maskPtr (out) If not NULL, the word pointed to by maskPtr is
filled in with the bit-wise OR of the typeMask
fields for the options that were modified.
Tk_SavedOptions *savedPtr (in/out) Points to a structure previously filled in by
Tk_SetOptions with old values of modified
options.
Tcl_Obj *namePtr (in) The value of this object is the name of a par-
ticular option. If NULL is passed to
Tk_GetOptionInfo then information is returned
for all options. Must not be NULL when
Tk_GetOptionValue is called.
type name type (in) The name of the type of a record.
field name field (in) The name of a field in records of type type.
_________________________________________________________________
DESCRIPTION
These procedures handle most of the details of parsing configuration options such as those
for Tk widgets. Given a description of what options are supported, these procedures han-
dle all the details of parsing options and storing their values into a C structure associ-
ated with the widget or object. The procedures were designed primarily for widgets in Tk,
but they can also be used for other kinds of objects that have configuration options. In
the rest of this manual page "widget" will be used to refer to the object whose options
are being managed; in practice the object may not actually be a widget. The term "widget
record" is used to refer to the C-level structure in which information about a particular
widget or object is stored.
Note: the easiest way to learn how to use these procedures is to look at a working exam-
ple. In Tk, the simplest example is the code that implements the button family of wid-
gets, which is in tkButton.c. Other examples are in tkSquare.c and tkMenu.c.
In order to use these procedures, the code that implements the widget must contain a
static array of Tk_OptionSpec structures. This is a template that describes the various
options supported by that class of widget; there is a separate template for each kind of
widget. The template contains information such as the name of each option, its type, its
default value, and where the value of the option is stored in the widget record. See TEM-
PLATES below for more detail.
In order to process configuration options efficiently, the static template must be aug-
mented with additional information that is available only at runtime. The procedure
Tk_CreateOptionTable creates this dynamic information from the template and returns a
Tk_OptionTable token that describes both the static and dynamic information. All of the
other procedures, such as Tk_SetOptions, take a Tk_OptionTable token as argument. Typi-
cally, Tk_CreateOptionTable is called the first time that a widget of a particular class
is created and the resulting Tk_OptionTable is used in the future for all widgets of that
class. A Tk_OptionTable may be used only in a single interpreter, given by the interp
argument to Tk_CreateOptionTable. When an option table is no longer needed Tk_DeleteOp-
tionTable should be called to free all of its resources. All of the option tables for a
Tcl interpreter are freed automatically if the interpreter is deleted.
Tk_InitOptions is invoked when a new widget is created to set the default values for all
of the widget's configuration options. Tk_InitOptions is passed a token for an option ta-
ble (optionTable) and a pointer to a widget record (recordPtr), which is the C structure
that holds information about this widget. Tk_InitOptions uses the information in the
option table to choose an appropriate default for each option, then it stores the default
value directly into the widget record, overwriting any information that was already
present in the widget record. Tk_InitOptions normally returns TCL_OK. If an error
occurred while setting the default values (e.g., because a default value was erroneous)
then TCL_ERROR is returned and an error message is left in interp's result if interp is
not NULL.
Tk_SetOptions is invoked to modify configuration options based on information specified in
a Tcl command. The command might be one that creates a new widget, or a command that mod-
ifies options on an existing widget. The objc and objv arguments describe the values of
the arguments from the Tcl command. Objv must contain an even number of objects: the
first object of each pair gives the name of an option and the second object gives the new
value for that option. Tk_SetOptions looks up each name in optionTable, checks that the
new value of the option conforms to the type in optionTable, and stores the value of the
option into the widget record given by recordPtr. Tk_SetOptions normally returns TCL_OK.
If an error occurred (such as an unknown option name or an illegal option value) then
TCL_ERROR is returned and an error message is left in interp's result if interp is not
NULL.
Tk_SetOptions has two additional features. First, if the maskPtr argument is not NULL
then it points to an integer value that is filled in with information about the options
that were modified. For each option in the template passed to Tk_CreateOptionTable there
is a typeMask field. The bits of this field are defined by the code that implements the
widget; for example, each bit might correspond to a particular configuration option.
Alternatively, bits might be used functionally. For example, one bit might be used for
redisplay: all options that affect the widget's display, such that changing the option
requires the widget to be redisplayed, might have that bit set. Another bit might indi-
cate that the geometry of the widget must be recomputed, and so on. Tk_SetOptions OR's
together the typeMask fields from all the options that were modified and returns this
value at *maskPtr; the caller can then use this information to optimize itself so that,
for example, it does not redisplay the widget if the modified options do not affect the
widget's appearance.
The second additional feature of Tk_SetOptions has to do with error recovery. If an error
occurs while processing configuration options, this feature makes it possible to restore
all the configuration options to their previous values. Errors can occur either while
processing options in Tk_SetOptions or later in the caller. In many cases the caller does
additional processing after Tk_SetOptions returns; for example, it might use an option
value to set a trace on a variable and may detect an error if the variable is an array
instead of a scalar. Error recovery is enabled by passing in a non-NULL value for the
savePtr argument to Tk_SetOptions; this should be a pointer to an uninitialized Tk_Save-
dOptions structure on the caller's stack. Tk_SetOptions overwrites the structure pointed
to by savePtr with information about the old values of any options modified by the proce-
dure. If Tk_SetOptions returns successfully, the caller uses the structure in one of two
ways. If the caller completes its processing of the new options without any errors, then
it must pass the structure to Tk_FreeSavedOptions so that the old values can be freed. If
the caller detects an error in its processing of the new options, then it should pass the
structure to Tk_RestoreSavedOptions, which will copy the old values back into the widget
record and free the new values. If Tk_SetOptions detects an error then it automatically
restores any options that had already been modified and leaves *savePtr in an empty state:
the caller need not call either Tk_FreeSavedOptions or Tk_RestoreSavedOptions. If the
savePtr argument to Tk_SetOptions is NULL then Tk_SetOptions frees each old option value
immediately when it sets a new value for the option. In this case, if an error occurs in
the third option, the old values for the first two options cannot be restored.
Tk_GetOptionValue returns the current value of a configuration option for a particular
widget. The namePtr argument contains the name of an option; Tk_GetOptionValue uses
optionTable to lookup the option and extract its value from the widget record pointed to
by recordPtr, then it returns an object containing that value. If an error occurs (e.g.,
because namePtr contains an unknown option name) then NULL is returned and an error mes-
sage is left in interp's result unless interp is NULL.
Tk_GetOptionInfo returns information about configuration options in a form suitable for
configure widget commands. If the namePtr argument is not NULL, it points to an object
that gives the name of a configuration option; Tk_GetOptionInfo returns an object contain-
ing a list with five elements, which are the name of the option, the name and class used
for the option in the option database, the default value for the option, and the current
value for the option. If the namePtr argument is NULL, then Tk_GetOptionInfo returns
information about all options in the form of a list of lists; each sublist describes one
option. Synonym options are handled differently depending on whether namePtr is NULL: if
namePtr is NULL then the sublist for each synonym option has only two elements, which are
the name of the option and the name of the other option that it refers to; if namePtr is
non-NULL and names a synonym option then the object returned is the five-element list for
the other option that the synonym refers to. If an error occurs (e.g., because namePtr
contains an unknown option name) then NULL is returned and an error message is left in
interp's result unless interp is NULL.
Tk_FreeConfigOptions must be invoked when a widget is deleted. It frees all of the
resources associated with any of the configuration options defined in recordPtr by
optionTable.
The Tk_Offset macro is provided as a safe way of generating the objOffset and internalOff-
set values for entries in Tk_OptionSpec structures. It takes two arguments: the name of a
type of record, and the name of a field in that record. It returns the byte offset of the
named field in records of the given type.
TEMPLATES
The array of Tk_OptionSpec structures passed to Tk_CreateOptionTable via its templatePtr
argument describes the configuration options supported by a particular class of widgets.
Each structure specifies one configuration option and has the following fields:
typedef struct {
Tk_OptionType type;
const char *optionName;
const char *dbName;
const char *dbClass;
const char *defValue;
int objOffset;
int internalOffset;
int flags;
ClientData clientData;
int typeMask;
} Tk_OptionSpec;
The type field indicates what kind of configuration option this is (e.g. TK_OPTION_COLOR
for a color value, or TK_OPTION_INT for an integer value). Type determines how the value
of the option is parsed (more on this below). The optionName field is a string such as
-font or -bg; it is the name used for the option in Tcl commands and passed to procedures
via the objc or namePtr arguments. The dbName and dbClass fields are used by Tk_InitOp-
tions to look up a default value for this option in the option database; if dbName is NULL
then the option database is not used by Tk_InitOptions for this option. The defValue
field specifies a default value for this configuration option if no value is specified in
the option database. The objOffset and internalOffset fields indicate where to store the
value of this option in widget records (more on this below); values for the objOffset and
internalOffset fields should always be generated with the Tk_Offset macro. The flags
field contains additional information to control the processing of this configuration
option (see below for details). ClientData provides additional type-specific data needed
by certain types. For instance, for TK_OPTION_COLOR types, clientData is a string giving
the default value to use on monochrome displays. See the descriptions of the different
types below for details. The last field, typeMask, is used by Tk_SetOptions to return
information about which options were modified; see the description of Tk_SetOptions above
for details.
When Tk_InitOptions and Tk_SetOptions store the value of an option into the widget record,
they can do it in either of two ways. If the objOffset field of the Tk_OptionSpec is
greater than or equal to zero, then the value of the option is stored as a (Tcl_Obj *) at
the location in the widget record given by objOffset. If the internalOffset field of the
Tk_OptionSpec is greater than or equal to zero, then the value of the option is stored in
a type-specific internal form at the location in the widget record given by internalOff-
set. For example, if the option's type is TK_OPTION_INT then the internal form is an
integer. If the objOffset or internalOffset field is negative then the value is not
stored in that form. At least one of the offsets must be greater than or equal to zero.
The flags field consists of one or more bits ORed together. At present only a single flag
is supported: TK_OPTION_NULL_OK. If this bit is set for an option then an empty string
will be accepted as the value for the option and the resulting internal form will be a
NULL pointer, a zero value, or None, depending on the type of the option. If the flag is
not set then empty strings will result in errors. TK_OPTION_NULL_OK is typically used to
allow a feature to be turned off entirely, e.g. set a cursor value to None so that a win-
dow simply inherits its parent's cursor. Not all option types support the
TK_OPTION_NULL_OK flag; for those that do, there is an explicit indication of that fact in
the descriptions below.
The type field of each Tk_OptionSpec structure determines how to parse the value of that
configuration option. The legal value for type, and the corresponding actions, are
described below. If the type requires a tkwin value to be passed into procedures like
Tk_SetOptions, or if it uses the clientData field of the Tk_OptionSpec, then it is indi-
cated explicitly; if not mentioned, the type requires neither tkwin nor clientData.
TK_OPTION_ANCHOR
The value must be a standard anchor position such as ne or center. The internal
form is a Tk_Anchor value like the ones returned by Tk_GetAnchorFromObj.
TK_OPTION_BITMAP
The value must be a standard Tk bitmap name. The internal form is a Pixmap token
like the ones returned by Tk_AllocBitmapFromObj. This option type requires tkwin
to be supplied to procedures such as Tk_SetOptions, and it supports the
TK_OPTION_NULL_OK flag.
TK_OPTION_BOOLEAN
The value must be a standard boolean value such as true or no. The internal form
is an integer with value 0 or 1.
TK_OPTION_BORDER
The value must be a standard color name such as red or #ff8080. The internal form
is a Tk_3DBorder token like the ones returned by Tk_Alloc3DBorderFromObj. This
option type requires tkwin to be supplied to procedures such as Tk_SetOptions, and
it supports the TK_OPTION_NULL_OK flag.
TK_OPTION_COLOR
The value must be a standard color name such as red or #ff8080. The internal form
is an (XColor *) token like the ones returned by Tk_AllocColorFromObj. This option
type requires tkwin to be supplied to procedures such as Tk_SetOptions, and it sup-
ports the TK_OPTION_NULL_OK flag.
TK_OPTION_CURSOR
The value must be a standard cursor name such as cross or @foo. The internal form
is a Tk_Cursor token like the ones returned by Tk_AllocCursorFromObj. This option
type requires tkwin to be supplied to procedures such as Tk_SetOptions, and when
the option is set the cursor for the window is changed by calling XDefineCursor.
This option type also supports the TK_OPTION_NULL_OK flag.
TK_OPTION_CUSTOM
This option allows applications to define new option types. The clientData field
of the entry points to a structure defining the new option type. See the section
CUSTOM OPTION TYPES below for details.
TK_OPTION_DOUBLE
The string value must be a floating-point number in the format accepted by strtol.
The internal form is a C double value. This option type supports the
TK_OPTION_NULL_OK flag; if a NULL value is set, the internal representation is set
to zero.
TK_OPTION_END
Marks the end of the template. There must be a Tk_OptionSpec structure with type
TK_OPTION_END at the end of each template. If the clientData field of this struc-
ture is not NULL, then it points to an additional array of Tk_OptionSpec's, which
is itself terminated by another TK_OPTION_END entry. Templates may be chained
arbitrarily deeply. This feature allows common options to be shared by several
widget classes.
TK_OPTION_FONT
The value must be a standard font name such as Times 16. The internal form is a
Tk_Font handle like the ones returned by Tk_AllocFontFromObj. This option type
requires tkwin to be supplied to procedures such as Tk_SetOptions, and it supports
the TK_OPTION_NULL_OK flag.
TK_OPTION_INT
The string value must be an integer in the format accepted by strtol (e.g. 0 and 0x
prefixes may be used to specify octal or hexadecimal numbers, respectively). The
internal form is a C int value.
TK_OPTION_JUSTIFY
The value must be a standard justification value such as left. The internal form
is a Tk_Justify like the values returned by Tk_GetJustifyFromObj.
TK_OPTION_PIXELS
The value must specify a screen distance such as 2i or 6.4. The internal form is
an integer value giving a distance in pixels, like the values returned by Tk_Get-
PixelsFromObj. Note: if the objOffset field is not used then information about the
original value of this option will be lost. See OBJOFFSET VS. INTERNALOFFSET below
for details. This option type supports the TK_OPTION_NULL_OK flag; if a NULL value
is set, the internal representation is set to zero.
TK_OPTION_RELIEF
The value must be standard relief such as raised. The internal form is an integer
relief value such as TK_RELIEF_RAISED. This option type supports the
TK_OPTION_NULL_OK flag; if the empty string is specified as the value for the
option, the integer relief value is set to TK_RELIEF_NULL.
TK_OPTION_STRING
The value may be any string. The internal form is a (char *) pointer that points
to a dynamically allocated copy of the value. This option type supports the
TK_OPTION_NULL_OK flag.
TK_OPTION_STRING_TABLE
For this type, clientData is a pointer to an array of strings suitable for passing
to Tcl_GetIndexFromObj. The value must be one of the strings in the table, or a
unique abbreviation of one of the strings. The internal form is an integer giving
the index into the table of the matching string, like the return value from
Tcl_GetStringFromObj.
TK_OPTION_SYNONYM
This type is used to provide alternative names for an option (for example, -bg is
often used as a synonym for -background). The clientData field is a string that
gives the name of another option in the same table. Whenever the synonym option is
used, the information from the other option will be used instead.
TK_OPTION_WINDOW
The value must be a window path name. The internal form is a Tk_Window token for
the window. This option type requires tkwin to be supplied to procedures such as
Tk_SetOptions (in order to identify the application), and it supports the
TK_OPTION_NULL_OK flag.
STORAGE MANAGEMENT ISSUES
If a field of a widget record has its offset stored in the objOffset or internalOffset
field of a Tk_OptionSpec structure then the procedures described here will handle all of
the storage allocation and resource management issues associated with the field. When the
value of an option is changed, Tk_SetOptions (or Tk_FreeSavedOptions) will automatically
free any resources associated with the old value, such as Tk_Fonts for TK_OPTION_FONT
options or dynamically allocated memory for TK_OPTION_STRING options. For an option
stored as an object using the objOffset field of a Tk_OptionSpec, the widget record shares
the object pointed to by the objv value from the call to Tk_SetOptions. The reference
count for this object is incremented when a pointer to it is stored in the widget record
and decremented when the option is modified. When the widget is deleted Tk_FreeConfigOp-
tions should be invoked; it will free the resources associated with all options and decre-
ment reference counts for any objects.
However, the widget code is responsible for storing NULL or None in all pointer and token
fields before invoking Tk_InitOptions. This is needed to allow proper cleanup in the rare
case where an error occurs in Tk_InitOptions.
OBJOFFSET VS. INTERNALOFFSET
In most cases it is simplest to use the internalOffset field of a Tk_OptionSpec structure
and not the objOffset field. This makes the internal form of the value immediately avail-
able to the widget code so the value does not have to be extracted from an object each
time it is used. However, there are two cases where the objOffset field is useful. The
first case is for TK_OPTION_PIXELS options. In this case, the internal form is an integer
pixel value that is valid only for a particular screen. If the value of the option is
retrieved, it will be returned as a simple number. For example, after the command .b con-
figure -borderwidth 2m, the command .b configure -borderwidth might return 7, which is the
integer pixel value corresponding to 2m. Unfortunately, this loses the original screen-
independent value. Thus for TK_OPTION_PIXELS options it is better to use the objOffset
field. In this case the original value of the option is retained in the object and can be
returned when the option is retrieved. In most cases it is convenient to use the inter-
nalOffset field as well, so that the integer value is immediately available for use in the
widget code (alternatively, Tk_GetPixelsFromObj can be used to extract the integer value
from the object whenever it is needed). Note: the problem of losing information on
retrievals exists only for TK_OPTION_PIXELS options.
The second reason to use the objOffset field is in order to implement new types of options
not supported by these procedures. To implement a new type of option, you can use
TK_OPTION_STRING as the type in the Tk_OptionSpec structure and set the objOffset field
but not the internalOffset field. Then, after calling Tk_SetOptions, convert the object
to internal form yourself.
CUSTOM OPTION TYPES
Applications can extend the built-in configuration types with additional configuration
types by writing procedures to parse, print, free, and restore saved copies of the type
and creating a structure pointing to those procedures:
typedef struct Tk_ObjCustomOption {
char *name;
Tk_CustomOptionSetProc *setProc;
Tk_CustomOptionGetProc *getProc;
Tk_CustomOptionRestoreProc *restoreProc;
Tk_CustomOptionFreeProc *freeProc;
ClientData clientData;
} Tk_ObjCustomOption;
typedef int Tk_CustomOptionSetProc(
ClientData clientData,
Tcl_Interp *interp,
Tk_Window tkwin,
Tcl_Obj **valuePtr,
char *recordPtr,
int internalOffset,
char *saveInternalPtr,
int flags);
typedef Tcl_Obj *Tk_CustomOptionGetProc(
ClientData clientData,
Tk_Window tkwin,
char *recordPtr,
int internalOffset);
typedef void Tk_CustomOptionRestoreProc(
ClientData clientData,
Tk_Window tkwin,
char *internalPtr,
char *saveInternalPtr);
typedef void Tk_CustomOptionFreeProc(
ClientData clientData,
Tk_Window tkwin,
char *internalPtr);
The Tk_ObjCustomOption structure contains six fields: a name for the custom option type;
pointers to the four procedures; and a clientData value to be passed to those procedures
when they are invoked. The clientData value typically points to a structure containing
information that is needed by the procedures when they are parsing and printing options.
RestoreProc and freeProc may be NULL, indicating that no function should be called for
those operations.
The setProc procedure is invoked by Tk_SetOptions to convert a Tcl_Obj into an internal
representation and store the resulting value in the widget record. The arguments are:
clientData
A copy of the clientData field in the Tk_ObjCustomOption structure.
interp A pointer to a Tcl interpreter, used for error reporting.
Tkwin A copy of the tkwin argument to Tk_SetOptions
valuePtr
A pointer to a reference to a Tcl_Obj describing the new value for the
option; it could have been specified explicitly in the call to Tk_SetOptions
or it could come from the option database or a default. If the objOffset
for the option is non-negative (the option value is stored as a (Tcl_Obj *)
in the widget record), the Tcl_Obj pointer referenced by valuePtr is the
pointer that will be stored at the objOffset for the option. SetProc may
modify the value if necessary; for example, setProc may change the value to
NULL to support the TK_OPTION_NULL_OK flag.
recordPtr
A pointer to the start of the widget record to modify.
internalOffset
Offset in bytes from the start of the widget record to the location where
the internal representation of the option value is to be placed.
saveInternalPtr
A pointer to storage allocated in a Tk_SavedOptions structure for the inter-
nal representation of the original option value. Before setting the option
to its new value, setProc should set the value referenced by saveInternalPtr
to the original value of the option in order to support Tk_RestoreSavedOp-
tions.
flags A copy of the flags field in the Tk_OptionSpec structure for the option
SetProc returns a standard Tcl result: TCL_OK to indicate successful processing, or
TCL_ERROR to indicate a failure of any kind. An error message may be left in the Tcl
interpreter given by interp in the case of an error.
The getProc procedure is invoked by Tk_GetOptionValue and Tk_GetOptionInfo to retrieve a
Tcl_Obj representation of the internal representation of an option. The clientData argu-
ment is a copy of the clientData field in the Tk_ObjCustomOption structure. Tkwin is a
copy of the tkwin argument to Tk_GetOptionValue or Tk_GetOptionInfo. RecordPtr is a
pointer to the beginning of the widget record to query. InternalOffset is the offset in
bytes from the beginning of the widget record to the location where the internal represen-
tation of the option value is stored. GetProc must return a pointer to a Tcl_Obj repre-
senting the value of the option.
The restoreProc procedure is invoked by Tk_RestoreSavedOptions to restore a previously
saved internal representation of a custom option value. The clientData argument is a copy
of the clientData field in the Tk_ObjCustomOption structure. Tkwin is a copy of the tkwin
argument to Tk_GetOptionValue or Tk_GetOptionInfo. InternalPtr is a pointer to the loca-
tion where internal representation of the option value is stored. SaveInternalPtr is a
pointer to the saved value. RestoreProc must copy the value from saveInternalPtr to
internalPtr to restore the value. RestoreProc need not free any memory associated with
either internalPtr or saveInternalPtr; freeProc will be invoked to free that memory if
necessary. RestoreProc has no return value.
The freeProc procedure is invoked by Tk_SetOptions and Tk_FreeSavedOptions to free any
storage allocated for the internal representation of a custom option. The clientData
argument is a copy of the clientData field in the Tk_ObjCustomOption structure. Tkwin is
a copy of the tkwin argument to Tk_GetOptionValue or Tk_GetOptionInfo. InternalPtr is a
pointer to the location where the internal representation of the option value is stored.
The freeProc must free any storage associated with the option. FreeProc has no return
value.
KEYWORDS
anchor, bitmap, boolean, border, color, configuration option, cursor, double, font, inte-
ger, justify, pixels, relief, screen distance, synonym
Tk 8.1 Tk_SetOptions(3) |
|